Splitting Data From A Cell To Multiple Rows

Apr 26, 2009

Faced with a problem. I have steps for doing testing in one cell but I need to put them in multiple rows.

Example ....

View 7 Replies


ADVERTISEMENT

Splitting Row Of Data Into Multiple Rows

Apr 22, 2014

I need to split one row of data into multiple rows. I have one column which consists of a list of companies and Next to it I have a series of attributes for every year. I need to transpose the years into a single column and next to each year I need the values of the attributes.

Have a look at the attached file : Abrasives.xls.xlsx‎

View 1 Replies View Related

Splitting Cell Into Multiple Rows

Jan 17, 2013

Formula or macro that can accomplish the following? In the original data, the text under 'A_Services' is contained within one cell. I want to break out the data as indicated in multiple rows, but only include the first 5 characters.

Orginal Data
appt_number
date
length
A_ICOMS_WO_TYPE
A_TOTALPOINTS
A_SERVICE_CODE
A_SERVICES

[Code]...

View 8 Replies View Related

Splitting Out Value In Row Into Multiple Rows Based On Particular Percentages?

Apr 11, 2014

I have two tables of data (each on its own sheet). One contains cost centers and dollar values (Sheet1), the other contains cost centers, secondary cost centers, and percentages (Sheet2). Each cost center can have any number of secondary cost centers, from 1 to almost 100.

The issue is that I need to have the single-row cost centers on Sheet1 broken down on a third sheet where the dollar amounts are distributed to the secondary cost centers according to the percentages on Sheet2. There is a lot of other data that will be pulled into this but that doesn't need to be modified in any fashion.

I can do it in Access, but doing it purely in Excel (which is the task I am given) seems problematic.

I tried using the Microsoft Query, but it only allows me to query from earlier versions of Excel, not the present version. I am debating saving the sheets out to individual CSV files, then importing them through Microsoft Query, but am hoping for a more elegant solution from this forum.

View 6 Replies View Related

Splitting Multiple Entries In Single Cell Into Multiple Columns

Jan 15, 2013

I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows

Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID

Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3

How I could achieve this as I have a number of projects where this would become useful

I know you can use delimiters but with spaces between the values I just can't fathom a way forward.

View 12 Replies View Related

Sorting Rows Of Data And Splitting Into Different Sheets

Mar 6, 2007

I have sets of data (A1....F50000 or more) that I need to sort out based on the cell value in column F. Based on the cell value I would like the info on the row (A to F) put into a different sheet. There would be 8 different sheets and each sheet would include 1 to 50 different sorts from column F.

The macro could start with one material sort each and I could fill in the rest of the sorts. The 8 different materials (one for each sheet to start) could be "34b2p""ptop27""pdw19""p58leg""ppdpts""mirror""Pdoor""bent""p4545".

View 9 Replies View Related

Splitting A Cell Into Multiple

Jul 29, 2009

I'm currently working on a little project and at the moment it's my programmign skills letting me down lol, I'm litterally about to start pulling my hair out over not getting this to wokr. I extract data from my device which is in the following format.

View 14 Replies View Related

Excel 2007 :: Splitting Data Into Multiple Sheets

Apr 24, 2013

Writing code in VBA for splitting data into multiple sheets?

The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.

Following is the input sheet, the data needs to be split based on entry in the column "Job Type".

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair
04-Apr-13$20033456Contract Work10-Apr-13$40047896General23-Apr-13$100Input Sheet

Following tables are showing data split into multiple sheets and the sheet names are the same as entry under the column "Job Type"

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair04-Apr-13$200Repair

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount23456Contract Work10-Apr-13$400Contract Work

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount27896General23-Apr-13$100General

View 9 Replies View Related

Splitting Data From A Cell Into Different Cells

Jan 22, 2009

I have a column that has data with multiple values seperated by commas. I need to seperate out the values and add them to a new column.

Example:

Column A
good, cheap, fast
slow
good
cheap
cheap,good

I would like them to be added to column B as:
good
cheap
fast
slow
good
cheap
cheap
good

View 7 Replies View Related

Macro For Splitting Data From Cell That Has More Than One Value In It?

Dec 5, 2013

Each row in my spreadsheet is a record. Unfortunately, for one cell, the data base that the info came from has in more than one piece of data in a cell in the data dump into Excel for that record. Each piece of data in the multi data cell is seperate by a ctrl enter hidden break.

I need a seperate record tied to the original record for each item in the multi data cell so that I end up with a flat file with unique records and data on one row.

Is there a way to do this other than manually? I'd like to have a macro since I run into this quite often depending on the client.

View 1 Replies View Related

Splitting Cell Data Into Columns / Data Cleaning

May 10, 2006

how to split data into columns.

I have a set of (imported) data consisting of 1000+ rows. The data set (bank statement) contain six informations (date1, transaction, vendor, date2, sum1, sum2) in one cell which has to be split into six columns.

Using text-to-columns will generate more than six columns since the set dosn't have any delimiters and both the transaction and vendor name-fields contain blank spaces.

Is there a way to either split the data into the correct number of columns or if text-to-columns is used - a way to manipulate the data into the correct columns, for instance with help of filtering ?

small data sample included

View 3 Replies View Related

Excel 2007 :: Splitting Out Data Within Same Cell?

Feb 14, 2012

I have a table in Excel 2007, one set of data in a column contains cells with data such as = AA701 DIS34 5283000, Z00IS0750 Now these AA codes DIS codes 5283 codes and Z00 codes can all be different!! and they are all within the same cell.

What I need to be able to do is find out which AA code which DIS code which 5283 code and which Z00 code is reported within each cell on each row?

So could I split them out into different cells via VBA? or can I do some kind of lookup that picks up a AA code (for example) ?

The constraints I have is this is downloading from a web query, I do not have the ability to alter the way the original data is coming across, I can only alter it once I have received it - refresh and then alter it again.

View 9 Replies View Related

Copying Data From Merged Cell Into All Resulting Cells After Splitting

Dec 2, 2009

I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.

I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.

My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.

View 2 Replies View Related

Split A Cell Of Data Into Multiple Rows?

Mar 22, 2013

I have some data from web-site, when I copy paste these data to Excel is only in 1 cell and i would like to split it into multiple rows by comma.

View 4 Replies View Related

Split Cell Data In Multiple Rows

Jul 18, 2006

I was just not able to figure out how to write a macro for splitting the cell data into multiple rows with the other column values being duplicated. Just elaborating my problem, its like i have a column in which i have multiple values separted by a comma, So i need to divide all these values on basis of a comma and then copy this value to a new row below, along with the previous column values same for this new row. in my file cost center column is to be worked upon. Can this be done by a macro ?

View 5 Replies View Related

Multiple Ccolums/rows To Get Data From Multiple Columns/rows (vlookup)

Jan 15, 2010

I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............

View 3 Replies View Related

Splitting Up An Excel File By Rows

Nov 24, 2008

I am trying to split up an excel file that has 18000 lines, i want to break this into groups of 100 lines and retain the original header info on line one for each file. Is this possible to do with a macro. I have NO experience with macros of programming so go easy on me. It would be great if it could autosave as book 1 book 2 book 3 or whatever, file name doesn't matter that much.

View 9 Replies View Related

Splitting Cell Data By Last "" (backslash) In The Cell As The Separator?

Mar 6, 2010

Is it possible to split a cell into 2 different cells, using the last "" (backslash) in the cell as the separator? ...

View 9 Replies View Related

Splitting Multiline Cells Into Separate Rows

Feb 13, 2014

I basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.

Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:

Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code

[carriage return in street address, city, state and zip cells]

--------------------------------- |Street Address | City | State | Zip Code

[carriage return in street address, city, state and zip cells]

--------------------------------- |Street Address | City | State | Zip Code

Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code

Please note that some individuals have 2-4 different addresses.

I would like to manipulate the 5 rows of example data above so that when I am done I have the following:

1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:

Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code

View 9 Replies View Related

Splitting One Sheet Into Multiple Sheets

Aug 26, 2012

I have master sheet which is not fixed row (rows are variable)

In Column A has customers name (customer names are repeating more than once).

Table range("A1:D30")

I want to create a sheet with customer name and related data should be copied from master sheet.

This can be done by advance filtering and coping but I failed to create sheets automatically.

View 4 Replies View Related

Splitting 1 Sheet Into Multiple Sheets By Column Value

Mar 5, 2013

I have a sheet with about 200 columns of data and 1000 rows . I'd like to split this sheet into multiple sheets based off of info in column A. Column A contains numerical categories 001, 002, 003 etc So my result would be a sheet for each numerical category with all info from previous sheet. Each category contains 5-30 items associated with that category. Any other way to split this without sorting, copying, and pasting?

View 7 Replies View Related

Splitting Files Into Multiple Workbooks On The Basis Of Specific Column?

Jul 6, 2014

I have excel data file where the code can split the data into different xls file on the basis of country for first sheet only.

execute the code so as to create single country wise files for all sheets. i.e. file consisting of data with sheet A1,B1,C1. The present code works only for sheet A1 and it creates different files with data related to that country. I was looking for the output file with B1 and C1 as well for that country. Also new output file needs to be renamed just as of original one.

View 3 Replies View Related

Splitting Data

Feb 15, 2009

The line below was originally a merged cell. I need to have the customer ID, Customer name, City, State and zip in seperate lines. I tried using the text to column, but the problem is some companies have a comma after their name to show if it is an llc or inc etc. What happens is the companies that do not have inc etc- it works just fine, however the ones that do have inc etc because there is another comma- it moves everything over one column. In the city column it says inc and in the state it has the city etc. Is there an easy way to make this work?

View 9 Replies View Related

Splitting Data In Cells

Jul 28, 2014

How to split the data in my cells

Currently it looks like this.
1 - 2 - 3,4,5
A - B - C

I would like it to look like this.
1 - 2 - 3
1 - 2 - 4
1 - 2 - 5
A - B - C

View 6 Replies View Related

Splitting Data From A List

Mar 31, 2009

I have an address list that each address is in one cell. How can I seperate the address, city, state, and zip when they vary so much? I have included a sample from the list below.

320 PLUS PARK BLVD NASHVILLE TN 37217-1001
806 TWIN CITY AVE SPRINGDALE AR 72764-7083
1415 MURFREESBORO RD NASHVILLE TN 37217
300 WILMOT RD DEERFIELD IL 60015-4600
4325 AMNICOLA HWY CHATTANOOGA TN 37406-1014
2505 WEST PARWAY DRIVE RUSSELLVILLE AR 72801
675 PONCE DE LEON AVE NE ATLANTA GA 30308-1829
2035 N COLLEGE AVE FAYETTEVILLE AR 72703-2613
PO BOX 45009 SALT LAKE CTY UT 84145-0009

View 2 Replies View Related

Splitting Data Into 2 Cells?

Oct 14, 2011

spliting a cell and moving them to 2 other cells.

Column D contains date and time in the format: 15/09/2011 08:01:01

I need them to be split into Date in column V and Time column W

Need the code to loop until there are no more values in column D.

Forgot to mention that the Column D is a date format and they need to be in there respective date and time format when split!

View 5 Replies View Related

Excel 2010 :: Multiple Entries In One Cell That Need To Be Spread Across Multiple Rows

Jun 17, 2014

I need to convert data from column IDS into separate rows, all other columns need to stay in tact. There are several distinct patterns for the IDS column, main identifiers are always starting with FILER or TEAL and the trailing numbers behind it have no more than 6 digits.

BEFORE MACRO

ID
AREA
TYPE
CLASS
QTY
IDS

1
COAL
TYPE9917312
CLASS881345
2
FILER756911**/**FILER123188 ^** FILER877119*118

[Code] ........

AFTER MACRO

ID
AREA
TYPE
CLASS
QTY
IDS

1
COAL
TYPE9917312
CLASS881345
2
FILER756911

[Code] ......

What the MACRO would look like? This is for Excel 2010.

View 3 Replies View Related

Splitting Frequency Data By A Category

May 21, 2014

It may be easier to view the attachment to see what I am trying to do.

I would like to split frequency data by groups.

So I have 2 different names in column A, with a bunch of their ratings in column C.

I would like to be able to view the frequency of their individual ratings to see who gave the most types of ratings.

View 3 Replies View Related

After Splitting Data In One Column Using Delimiter?

Jan 29, 2013

Currently, I have an excel sheet of names and addresses. In my address column, many of the addresses have carriage returns separating information. I want to divide this information by carriage returns and parse it into different columns.

I have already tried what I believe is the correct method: I go to Data>Text to Columns. I choose "delimited." Then I enter [Alt 0101] under "other" and make sure that is the only option checked. When I finish, only *some* of my data is parsed into corresponding columns by the delimiter while some isn't.

View 2 Replies View Related

Splitting One Row With Two Pieces Of Data Into Two Columns With Same Name

Jan 29, 2013

I have a homework assignment where I have a list of companies with the products they have with one other company. The original company and their products are listed on the same row, with a dollar value assigned to the product. So Cell A1 has company name, cell B1 has product a, and Cell c1 has the amount they pay for that product. Is there a function I can use to split that one row into 3 separate rows, to show the company name 3 times and the product and dollar amount as it's own row, next to the company?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved