I am looking for a way to that I can stack certain columns in an excel chart. For example the first column will be a total and the three next to it will be the breakdown of the first total. I want the second, third and fourth columns to stack on top of each other so that they will equal the height of the first. Is this possible? Also, I'm looking for the simplest solution because others will have to use this.
View 3 RepliesI want to stack columns in blocks. Have not been able to work out a VBA code for the same. Let me explain the need:
- There are N columns of data, for e.g., Col. A, B, C and D has Data (total of 10 rows) ... 4X10 layout
- I want to stack columns in blocks as follows:
AB
AC
AD
... 2X30 layout
I have a question about putting data in the right order. I have this order in my excel files:
City A, City B, City C
10 20 20
20 40 50
15 30 40
45 20 10
50 10 10
20 30 40
I need to put them in order from top to bottom like this:
10
20
15
45
50
20
20
40
30
20
10
30
20
50
40
10
10
40
Is there any way to do this in a fast way. Because I have 440 cities and 13 numbers per city copying and pasting will take a long time..
Any way in which i can 'paste link' and then 'paste link' again without overwriting the first link. example i have a row (say A1 to H1) with varying values in Book1 Sheet1. i know how to copy and paste a link to that onto, lets say Book2 Sheet1. but now in Book3 Sheet1 i want to copy and paste a link from A1 to H1 over to Book2, but have both links open for auto updates.
View 3 Replies View RelatedI have a spreadsheet with a bunch of formulas in Cells B4:E100 in Sheet1. Many of the formulas will show up blank information in the event I do not have any data in Column A. I then have formulas which perform a similar function in Cells G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100.
What I need to do is to take the data from the last 4 sets of cells (G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100) and stack then one on top of the other into Sheet2 starting in Cell A2. I need the code however to be smart enough to realize that if there are blanks which exist in any of those sets of cells to skip over to the next set of data I which to copy and start pasting that set of information without leaving any blanks.
So far example, if I only have data between Cells A4:A25, I want the VBA code to go only through cells G4:Q25 and then start pasting without any spaces S4:AC25 and so on.
I can create a column chart in excel comparing sales in 06 v's 07 for each month in 07, what I'm aiming to show on the chart is how sales have grown or not over a comparative period. A simple enough graph, I end up with about 24 columns (2 for each month and then a gap between each month).
I now want a line chart to show the performance of an index over the same time period, lets say the FTSE100.
I don't know how to get the line chart under the columns on the same graph, using the same x-axis with a small y-axis to the left. I could propably figure out the y-axis bit if I could only get the line chart below the columns.
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
I am trying to get an Excel chart to include columns AND stacked columns in the same chart with no success. I have attached the Excel chart where I could only get stacked columns and I had to use a line chart for the secondary axis. I could not figure out how to get the secondary axis to be a set as a column just like the primary axis. I thought this could be done in Excel, I have searched the forums and tried to play around with the gap width and/or include a blank column but I still haven't been able to get this to work.
View 5 Replies View RelatedI have two columns, one describing the stage of our client (won, lost, postponed .. ) and the other one describing the lead source (referral, repeater, website, ...). Now I would love to have a column chart out of those two values, to know how many website inquiries were lost / won / postponed .. how many referrals were lost / won / postponed .. also.
View 14 Replies View RelatedAny way using a macro so that a chart will not show the "0" columns?
View 6 Replies View RelatedAccording to my provided data, draw a stacked chart with double columns, each bar includes four types of data(Internet, PBS,Branches and Mail-in/Fax-in) and the x-axis are 1Q06, 2Q06 and 3Q06 repectively. It is urgent,pls provide the template for me. Many Many to all of you.
View 6 Replies View RelatedI am trying to color code the cubes in my chart. I'd like to be able to be able to specify a specific color per cube. What code what I write for the Sheet to do this?
View 5 Replies View RelatedI have 2 columns og data, for example
120
120
120
120
220
220
220
220
320
320
320
320
420
420
420
420
I want to plot them via a chart. But here is the problem..
My code.....................
I need to create 69 charts with 4 different series in every chart displaying information like average stock growth and so on. Is there any smarter way i can do that than manually when i know that the range of these charts will be consistent?
View 14 Replies View Relatedvba to switch columns to rows in a line chart
I have the following
I have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies View RelatedI am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
I would like to create a chart with stacked columns. Usually, the data on the Y-axis is some kind of numerical data, such as budget. I would like to have the Y-axis have non-numerical data (= nominal categories).
Example :
Take the following data :
category | productname
red berry
red carrot
green cabbage
green apple
The ouput format i want is a chart which shows on the horizontal axis the categories red and green, and stacks in each category the right productnames on top of eachother; preferably each productname should have a different colour and showing data labels (e.g. "1", "green","apple" could be 1 specific data label).
I don't know how to achieve this, because if you display data as "count of productnames", then automatically you get something like a block with value 2, which doesn't show the different productnames inside that block.
Can the desired chart be made with Excel somehow?
I'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies View RelatedI want to show 8 members of staff's names, with their sales closing percentages. I want then to produce a chart showing their percentages as a column with a line showing 16% going across the chart showing who is above and who is below the target.
Ideally i would also like to change the colour of the columns or background of those below the line to show who is under target.
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies View RelatedWhen I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies View RelatedI need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.