I am setting up a multiple listbox and trying to store the chosen values in one cell. I found a good reference on here but can not get it to work.
On my tab named "input" I have a listbox named "AppListBox"
When the user finishes choosing, I want all the values to go to one cell (H40) with a comma separating them.
Here is what I have within the Input tab code.
Private Sub AppListBox_LostFocus()
Dim s As String
DIm i As Integer
With AppListBox
For i = 0 To .ListCount - 1
If .Selected(i) = True Then s = s & ", " & .List(i)
Next i
Range("H40").Value = S
End With
End Sub
I am writing a macro that allows a user to select which fields they would like to copy from over 100 workbooks. I am using a multiselect ListBox on a userform that I populate using the "additem" approach. There are around 20 fields for the user to choose and each represents a column in the worksheet (all 100 worksheet are in the same format).
I need to use the user selection to identify which columns to pull from all worksheets.
How can I identify the selection the user made and incorrporate that in a copy range type of code. I planned to "Unload" the form after the user hit the "Run" (command) button (not sure if this will matter).
I have a formula utilizing a random number generator that produces a new number every time I hit the F9 button. I want to accumulate 1,000 values for these numbers, but I don't want to take the time to write down each number (copy and paste). I would like to simply hit F9 and have the value stored in a cell that then steps down so when I hit F9 again it records the new number, so at the end of the sampling, I end up with a column of 1,000 numbers
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
how do I save multiple items selected from a userform listbox to a single cell on a worksheets? How do I have those values display in a listbox on a userform for editing data sets?
I have this data inputted into excel sheet: [URL] .......
This data is in tab called Shops, that has 8 columns of information. In another sheet called control, I have the shops names from row A in a list box. What I am trying to do is when whatever shop is selected in the list box then output the shop information from that row in 8 different cells in another sheet. I have a list of about 200 shops that I need to input.
So if we pick shop, Abc inc from the list box how can I get excel to look up the information in Abc inc in the shops tab of information and then display them on other cells in different sheets.
I have the same issue with making a list box of people names. I made the list box but I want to make it so it will display there phone number and e-mail address in 2 other cells once you pick there names. I had some luck using the if command on smaller list boxes but I can't figure out how to get multiple cells of information to come out correctly
I have this script (below, Krishnakumar orignally provided this script).
I'm trying to edit it to add cell values from cells C16 and E16 along with the worksheet name it displays in listbox2. So lets say worksheet "rollover" is the sheet being displayed in the listbox2.
I would like for it to look something like this:
rollover TT:'data from cell C16' TA:'data from cell E16'
Public FilePath As String Public dic As Object Public oWB As String Public oWS As String Public aWS As Worksheet
Private Sub CommandButton1_Click() Dim i As Long, wb As Workbook, n As Long With Me.ListBox2 For i = 0 To .ListCount - 1 If .Selected(i) = True Then oWS = .list(i) Set wb = Workbooks.Open(FilePath & oWB, UpdateLinks:=0) wb.Sheets(oWS).Activate Exit For End If Next End With End Sub
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range Dim strFirstFind As String
With Sheet1.UsedRange Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart) If Not rngFind Is Nothing Then strFirstFind = rngFind.Address Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
I have problems with my userform's listboxes. I have two listboxes, and I want second listbox's values to be dependent on first listbox's values.
And even more complicated, I need second listbox's values to be dependent on values on certain matrix.
In that matrix, row headings are listbox1's values and column headings are listbox2's values. How ever there are blanc cells on that matrix aswell. So if there is a blanc cell(s) on a row which (heading) is selected at listbox1, then I don't want that column (heading) which intersects with the blanc cell to be included to my listbox2 values.
Finally I want to insert the selected values from listboxes and the value from the intersection of those listbox values (headings) on that matrix to worksheet.
I included an attachment, where you can see my point better. However, as you can see, now the listbox values are not dependent on that matrix. Otherwise it is working like I want it to work.
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria: First Letter of the Unique ID in column "E" - O, M, or L Program Type in Column "F" - U or R 1. O-U = U 2. O-R = RU 3. M-U = U2 4. M-R = R2U 5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB: Option Explicit Sub test() Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long Set dic = CreateObject("Scripting.Dictionary")
two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C
What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.
The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
I want to create & store ad-hoc tables in excel.... can anyone suggest the best way of doing this? Maybe can i use some sort of marker to distinguish when one table ends, and another begins? For eg, maybe i want to store 3 tables - 1 of different fruits and fruit volumes, the 2nd of employees and their shift times, and the third of various different leaflets, paper codes, volumes and dates.... eg, no particular theme
I have solution that uses userforms, the intro/menu has a company logo on it. What I want to be able to do is use this logo on actually worksheets that I have set up as templates for sending out invoices etc.
The person I am doing this for sometimes uses pre-printed headed paper and sometime plain papper. So I have a check box that asks whether headed paper is used. If so not a problem, if not, I need to add the logo at the top of the page, ideally from within the workbook.
When I enter the parameters DailyClose (which is an array of numeric), and EFBillsYield, which is a numeric also, the function will calculate the DailyReturn (in array) for each array element in DailyClose.
The problem is, I don't know how to catch the DailyReturn for each DailyClose element. The above code only loops and calculates DailyReturn one by one, but not storing it as an array.
How should it be modified so that the DailyReturn can be numeric array also, so that it can perform average and SD functions below the loop?
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
I've been searching on the internet for a solution to this (if it exists). I have a Userform and I want to include a listbox(or list view or anything like it) which allows the user to select a specific row by clicking a checkbox, and then the next columns will be activated to select numbers in several comboboxes. My goal is simply to add checkboxes and comboboxes to the list view.
I just want to know if this is possible in any way and how would I proceed in order to achieve it.
How can I modify the codes below so that the results in the listbox would reflect only the actual data? Some previous information stays in the listbox making the search inaccurate. I have tried to clear the listbox first before querying another but results are the same.
On the first loop, the queried items are accurately listed in Worksheets("Search"). For example, if the data being searched on has only one result, entries in this sheet would only show one. But when it is shown in the listbox, it at most times show previously queried information.
Also, how can I dynamically adjust the array so that no vertical scrollbar would appear if the queried results fit perfectly in the listbox? The array below would automatically assign 10 rows in the listbox even if the information shown consumes only less than 10 rows.
Option Explicit Dim MyArray(10, 5)
Public MyData As Range, c As Range
Sub FindCaseNo()
Application.ScreenUpdating = False
Dim FirstAddress As String 'what to find Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, fndF, fndG As String Dim fndH, fndI, fndJ, fndK, fndL, fndM, fndN, fndO, fndP, fndQ, fndR, fndS As String Dim head1, head2, head3, head4, head5 As String ' heading s for list Dim i, intFind, intCount As Integer i = 1
i have an excel table with embedded listboxes (Control Toolbar element). The user selects from listbox and has to send this file for approval. but when she saves the spreadsheet, the listbox-selection is reset to the first item. I know, that this is common for Excel, that the Listbox-selections are not saved. So I think the solution is:
1) to save the position of the shown listbox-item like
Cell(1,1).Value = Listbox1.TopIndex.Value
2) at reopening the saved file just to put this value into the Listbox like
Listbox1.TopIndex.Value = Cell (1,1).Value
But I don't know how to access this Control Toolbox objects from VBA. I've read some previous posts and then tried with
but it doesn't work. The simplest solution would be to use the LinkedCell property, but the users do not always click on the ListBox to select the Item, they just scroll with the mouse and then save the file, so that ListIndex and TopIndex are not the same.
I've created a workbook that I use daily. The workbook has two sheets. One for entering information. The other for storing information.
On the first sheet, I enter health information about myself. I also enter the date.
On the second sheet, I have rows dated from January 1, 2009 to December 31, 2009. If the date entered on the first sheet matches January 1, 2009, then the information is copied to that respective row. If the date entered on the first sheet matches January 2, 2009, then the information is copied to the corresponding January 2, 2009 row, etc, etc.
So far so good. I enter the information, the date, and instantly the information is copied over. I save the workbook and go to sleep happy................
