here is the code that I have come up with, Im trying to loop through a listbox having troubles getting value.
Code:
Private Sub cb_Delete_Click()
Dim peo As Worksheet: Set peo = Sheet3
lr = peo.Cells(Rows.Count, 1).End(xlUp).Row
[Code].....
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
I'm using Excel 2003:
I have agents that want to "own" records depending on the zip code. I want to dynamically assign agent to a record based on the zip code. If there was only one agent per zip code, this could easily be done with Lookup. However, in many instances there will be multiple agents for a zip code. In these cases, I was hoping to assign the agents to each record in a round robin fashion.
My agent/zip table would may look something like this:
37011 Smith
37013 Jones
37023 Herrman
37025 Martin
37025 Slater
37025 ORiley
37028 Phelps
37028 Trenton
37029 Reagan
I would then have another sheet made up of home addresses that each have a zip-code. If the record contains zip 37013, I can easily assign that one to Jones. However, if the zip in the record is 37025, there are three agents sharing that zip. So for the first record with 37025, I would assign Martin. The next occurence of 37025 would be Slater and the third would be ORiley. The fourth occurence would go back to Martin and so on.
I have found some versions of what I want to do on this site and others but can't find the looping capability.
The following formula (thanks to Barrie) determines if the difference between 2 values equals a third value, within a fourth ‘margin of error’ value, and returns either True or False.
=AND(C1-D1
So this code works fine without any error messages but I need to add a sum feature. Any ideas on summing up all the values from the for statement into the cell that corresponds to the value of the variable t. I think i need to store the the value of the for statement as a variable and then at the end of the for statement add the next value from the for statement and so on
Dim t As Integer
Dim m As Integer
t = 7
m = 11
Do While Cells(t, 7) ""
For m = 11 To (30)
col = Split(Columns(m).Address(0, 0), ":")(1)
Cells(t, 8).Formula = "=VLOOKUP(G" & t & ",indirect(" & col & 2 & "),2,FALSE)"
m = m + 1
Next m
t = t + 1
Loop
I am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
I have a looping dilemma. I update daily stock information to a table. Column A is the symbol. There are repeats of the symbol, which is what I'm looking for to start running functions/ alerts on them based on criteria etc. Anyway. I'm trying to loop through to look for new instances of symbol values, or, values in column A. What I've tried to do so far experimentally is to get a symbol value to be counted from an input box, then find a matching value in the range. It's below, not working:
Sub NewSymbolAdd()
'This is the macro that will loop through the symbols column of the master list to see if the new data downloads are new/
'need to be set up to download daily pricing data or ignore if that sheet already exists.
Dim symb As String
Dim finalrow As Long
Dim count As Long
Dim countsymb As Long
'Find the range size.
Worksheets("Watch List Main").Activate
finalrow = Cells(Rows.count, 1).End(xlUp).Row.........
I'm trying to code a macro to search through all the files in certain folders to find a value defined by the user. The rows containing that value will then be copied and pasted into a separate workbook. My boss currently planning on storing about 550 different files (90 days worth of data) between these folders, but there is the possibility of years worth of data collection, should he change his mind about the 90 days, so I'd like the code to be efficient if possible. What I've tried to do is search each file for the value, then set a range equal the first row containing that value. If the value is found in that workbook, the code loops through the worksheet, adding all the other rows with that value to the range. Then the file looping exits (the values I'm looking for are only contained in one of the workbooks) and the range is copied and pasted into the master workbook. Each workbook has only one sheet.
I'm currently getting a run-time error "13" Type Mismatch error when it gets to the line where the code is supposed to find the value and initialize the range.
Code:
Private Sub SubmitButton_Click()
Dim mybook As Workbook
Dim masterbook As Workbook
Dim rownunm As Long
Dim pathparts(1 To 5) As String
[Code] ......
I have problems with my userform's listboxes. I have two listboxes, and I want second listbox's values to be dependent on first listbox's values.
And even more complicated, I need second listbox's values to be dependent on values on certain matrix.
In that matrix, row headings are listbox1's values and column headings are listbox2's values. How ever there are blanc cells on that matrix aswell. So if there is a blanc cell(s) on a row which (heading) is selected at listbox1, then I don't want that column (heading) which intersects with the blanc cell to be included to my listbox2 values.
Finally I want to insert the selected values from listboxes and the value from the intersection of those listbox values (headings) on that matrix to worksheet.
I included an attachment, where you can see my point better. However, as you can see, now the listbox values are not dependent on that matrix. Otherwise it is working like I want it to work.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI've been searching on the internet for a solution to this (if it exists). I have a Userform and I want to include a listbox(or list view or anything like it) which allows the user to select a specific row by clicking a checkbox, and then the next columns will be activated to select numbers in several comboboxes. My goal is simply to add checkboxes and comboboxes to the list view.
I just want to know if this is possible in any way and how would I proceed in order to achieve it.
How can I modify the codes below so that the results in the listbox would reflect only the actual data? Some previous information stays in the listbox making the search inaccurate. I have tried to clear the listbox first before querying another but results are the same.
On the first loop, the queried items are accurately listed in Worksheets("Search"). For example, if the data being searched on has only one result, entries in this sheet would only show one. But when it is shown in the listbox, it at most times show previously queried information.
Also, how can I dynamically adjust the array so that no vertical scrollbar would appear if the queried results fit perfectly in the listbox? The array below would automatically assign 10 rows in the listbox even if the information shown consumes only less than 10 rows.
Option Explicit
Dim MyArray(10, 5)
Public MyData As Range, c As Range
Sub FindCaseNo()
Application.ScreenUpdating = False
Dim FirstAddress As String 'what to find
Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, fndF, fndG As String
Dim fndH, fndI, fndJ, fndK, fndL, fndM, fndN, fndO, fndP, fndQ, fndR, fndS As String
Dim head1, head2, head3, head4, head5 As String ' heading s for list
Dim i, intFind, intCount As Integer
i = 1
i have an excel table with embedded listboxes (Control Toolbar element). The user selects from listbox and has to send this file for approval. but when she saves the spreadsheet, the listbox-selection is reset to the first item. I know, that this is common for Excel, that the Listbox-selections are not saved. So I think the solution is:
1) to save the position of the shown listbox-item like
Cell(1,1).Value = Listbox1.TopIndex.Value
2) at reopening the saved file just to put this value into the Listbox like
Listbox1.TopIndex.Value = Cell (1,1).Value
But I don't know how to access this Control Toolbox objects from VBA. I've read some previous posts and then tried with
Worksheets("PAGE2"). OLEObjects("BC1L3_Isin").TopIndex.Value
but it doesn't work. The simplest solution would be to use the LinkedCell property, but the users do not always click on the ListBox to select the Item, they just scroll with the mouse and then save the file, so that ListIndex and TopIndex are not the same.
Column A has values increasing by 1 but not necessarily each row, i.e.
1 1 1 2 2 2 3 3 3 4 4 4 4 5 5 5 5 7 7 7 8 8 9 10 10 11 11 11 11 12 13 13 14 14 14
I have a listbox which I want to Initialize by listing these values but not duplicating them (so in this case it would contain 1-14). Here is the mindblowingly complicated code I currently have:
[Code].....
This gives me the list as it appears on the sheet but doesn't get rid of the duplicates for me.
I have a two dimensional database from which I need to pull information based on multiple listbox values (these listboxes are located in a userform). The user selects one or more cars and then chooses from various parameters for that car. The output has to show the results - for example, if Jeep Cherokee and mpg are chosen, the output will be 23 mpg. I need to be able to do this for multiple cars and multiple parameters.
I need for the outputs to be located in a worksheet. I already have the code for setting up the list of cars and parameters selected (this gives me a row and column header), but now I need to be able to cross reference this information to pull the output from the master database. I was wondering if I can use a vlookup function to do this, but I've never used it with 2 dimensional data.
how to reference a listbox value by column? For example, I have a listbox that is populated by two text boxes. The actual list looks like this:
ItemOne 1
ItemTwo 2
ItemThree 3
And so on. With Column 1 being a string and column 2 always a number.
I'd like to be able to take all of the values from column 1 and paste them into my spreadsheet next to particular adjacent cells.
Also, I'd like to take the values in column 2 and sum them.
I have several listboxes in userform. They are named like this:
Work1, Salary1, Workforce1, Hours1, Price1
Work2, Salary2, Workforce2, Hours2, Price2
Work3, Salary3, Workforce3, Hours3, Price3
...
Work24, Salary24, Workforce24, Hours24, Price42
Workx listbox contains text, others contain numbers. Now I need Pricex listboxes to contain the value of this calculation: Salaryx * Workforcex * Hoursx (For example Price17 listbox value would be Salary17 * Workforce17 * Hours17)
However, if Workforcex listbox is empty, then Pricex listboxes should contain the value of this calculation: Salaryx * Hoursx Then again, if user wants to skip entering Salaryx, Workforcex and Hoursx, I want to allow entering value straight to Pricex listbox. Then Salaryx, Workforcex and Hoursx listboxes should be enabled.
On the other hand if there already are values in Salaryx, Workforcex or Hoursx listboxes, then the Pricex listbox should be not enabled. I need the values of these calculations to be inserted in Pricex listbox right after there are enough inputs without pressing any button etc. (For example if there are values in Workx, Salaryx and Hoursx inboxes, the calculation should be entered to Pricex listbox immediatelly.
I would like to find out if I can have the values I selected in a two-column listbox and a one-column listbox in a userform shown in the status bar. It is possible to select more than one value in the list boxes, so the formula needs to be able to add the selected values.
View 2 Replies View RelatedHow do I preselect items in a listbox based on combobox selection and values stored in matrix.
I have attached the file with a description of what I mean
I'm afraid I've run into some trouble with the Listbox function, which I really love, but I can't quite get past this hurdle.
I want to have a listbox which populates by checking an entire column for values, ignoring blank cells, and, if value is present, to also check to see if any value is present in the cell one column to the right and one row down from the cell that has the initial value. If both these conditions are true, to then display both values in the Listbox. In other words, the Listbox would contain two columns.
During this routine, when checking value is present in the second cell, I'm guessing that an IF statement would increment a variable signifying the cell reference by + 1 for column and + 1 for the one row down?
I have systems that spit out text log files showing machine performance. Each log file has about 5000 lines of data in it which I import into excel for processing. One of the columns has a machine voltage that changes with the machine state. There might be 10-15 discrete values (like 500V, 800V, or 1000V) within the 5000 lines. I'm trying to populate a list box with just the discrete values so the user can choose what state to process for charting. Some log files might only have 2 or 3 voltages others might have 15 or more so it isnt fixed. I've been trying to use an advanced filter with copy to location and unique records selected but I run into problems with the variable size of the list and with the fact that the header repeats periodically and I can't seem to screen that out of the list.
View 9 Replies View RelatedI have a Multi Select ListBox with values from a range of cells.
I wish to automate the selection of one or more existing value(s) via VBA code so when User views the List, The check mark is visible. This will alert them to Active values.
i.e ListBox:
North
South
East
West.
If the active region is West, The check box beside West is Active, i.e contains an "X"
Is there way to take the values of a listbox selection located on a Worksheet and call that value when I initialize a Userform?
Or, if not, is there a way to declare my listbox selection as a public variable that can be accessed from any module of my VBA project?
I am setting up a multiple listbox and trying to store the chosen values in one cell. I found a good reference on here but can not get it to work.
On my tab named "input" I have a listbox named "AppListBox"
When the user finishes choosing, I want all the values to go to one cell (H40) with a comma separating them.
Here is what I have within the Input tab code.
Private Sub AppListBox_LostFocus()
Dim s As String
DIm i As Integer
With AppListBox
For i = 0 To .ListCount - 1
If .Selected(i) = True Then s = s & ", " & .List(i)
Next i
Range("H40").Value = S
End With
End Sub
I have an issue with some unwanted items in a listbox that gets its data from a pivot table, however it only happens with the one pivot field and for three of its pivot items.
I tried following a suggestion from an earlier thread to re-create the pivot table, but it did not work.
I'd like to post the file, but its too large, even in zip format.
I have a listbox which is populated with filenames from a specific folder when the userform is acivated. The user can choose any filename in the list to open it or adversly to delete it. When delete is used (ListBox is set to MultiSelectExtended) the selected files are 'Killed'. The filename list is then refreshed and listbox repopulated and resized ready for the next action. The problem is the recalculated ListBox.Height works fine and the ListBox shrinks in height as expected, but a vertical scroll bar appears as the number of lines is still that was prior to the files being deleted. This happens despite code having run an instruction to make the ListBox.Height = New Number of entries * line height. This doesn't stop the application to perform as expected but is an annoying cosmetic thing.
View 3 Replies View RelatedHow can I assign values from a listbox to a twodimensional array?
and next
do something like search and remove a row and assign the array back to the listbox
I know I can do it directly, but I need the array for something else too
I have created a userform in excel with a listbox that has the names of 4 different sheets located within that workbook. I would like for whenever a name of the sheet is highlighted in the listbox, that sheet is opened. I have played around with the listbox.value and if then statements and can't seem to get it to work.
View 2 Replies View RelatedI have a listbox that lists some items from a spreadsheet, but what I cannot figure out is how to have the font color of the items be RED if the value if negative, and default BLACK when positive...
how to alter the code to accommodate this?
VB:
With UserForm1.ListBox4
.ColumnCount = 5
.ColumnWidths = "2 cm;3 cm;3 cm; 3 cm; 3 cm" [code].....
I'm trying to copy Rows from a worksheet ("sheet1") in Workbook ("SourceData") to another workbook ("Final") and worksheet ("Regions") based on critieria selected in a listbox ("Listbox" located in a user form in "Final". The listbox selection is pasted in another worksheet, "Steps"). The trick is, the selection can be a single choice (Region2) or multiple choice (such as Region1, Region 3 and Region 7) and I'd want to copy any rows containing the selection criteria. I've got a bare bones start, but I can already see it's going to give me trouble. Here's what I've got:
View 9 Replies View Related