I'm trying to add up some values based on a criteria in another column. I have numbers in column A ranging from 0 - 100 and in column B have totals for those numbers. What i am trying to do is Add up the totals in column B based on the following criteria's in Column A.
<7, >7 & <=30, >30 & <=60, >60.
I have a summary page to display the individual results in separate cells.
In the attached excel file in column C, beginning on row 4, are numbers. These numbers will automatically update on my bloomberg terminal.
(1) I would like to then in column E to have a rating given to those numbers based on the below scale. The way the scale works is that if its 0.6 its a 10. If its anything slightly above 0.6 exactly, its a 9. A 10 is also a 0.5 and any number in between 0.5 and 0.6. The scale is below.
(2) Given that the formula that is being updated is a bloomberg excel formula (in the attached document I pasted it as values), will an excel formula be able to read the updated number in the bloomberg formula? If not, in column D is there a way to have it automatically paste D as values (and update each time column C changes or workbook is saved), and then have column E read off of those numbers.
Scale:
10 = 0.5 to 0.6
9 = 0.6 to 0.7
8 = 0.7 to 0.8
7= 0.8 to 0.9
6 = 0.9 to 1.0
5= 1.0 to 1.1
4= 1.1 to 1.2
3= 1.2 to 1.3
2= 1.3 to 1.4
1= 1.4 to 1.5
0 = anything greater than 1.5
I have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 Replies View Relatedhow to put together a function that will provide for me 1 of 3 results, ( lower than, higher than or similar to). What I would like to do is have a function to have the results for column B, be either "lower than", "higher than" or "similar to" based on column A. Column A will have a range of %'s from -100% to 100%. What I would like happen is the following results for cloumn B, based on column A. If Column A is:
Between -5% and 5% - Then cloumn B = "similar to"
>5% - Then cloumn B = "higher than"
>-5% - Then cloumn B = "lower than"
i modify the result but the problem is that when i try it the result alway have a higher number i cannot have a low number...
i want to have the reult from 1 to 1899
here is the
Private Sub CommandButton1_Click()
Randomize
TextBox1.Value = Int(Rnd * 1)
TextBox2.Value = Int(Rnd * 9) + 1
TextBox3.Value = Int(Rnd * 9) + 1
TextBox4.Value = Int(Rnd * 9) + 1
End Sub
Private Sub TextBox1_Change()
End Sub
Private Sub TextBox2_Change()
End Sub
Private Sub TextBox3_Change()
End Sub
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)
I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
I have a spreadsheet and I’m trying to create several different staffing scenarios
Basically what I want is to populate column E with the amount of staffing based on the number of classes in column B. The range that I want to apply is in the green box in the sample. I’m trying to have excel give me the staffing value if the current number in cell B5 is a certain value – so in the example 1 through 4 = .2, 5 through 8 = .4 and 9 through 12 = .6. this site gave me some ideas so I tried V lookup and Index but I seem to be missing something and wonder if it is not combinations of nested functions?
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I want to ask that I have got a workbook with different number series i want user form where i can enter its start number and end number and then it finds and delete shift cells up said series number i have entered in user form please see mentioned below example.
Series
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
and i want to delete 1 to 5 numbers delete to shift cells up.
I recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer
Dim ltcol As Integer
Dim lastrowno As Integer
Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
ActiveChart.SetSourceData Source:= Sheets("PLOTS").Range("AN27:AQ33"), PlotBy _
:=xlColumns
How do I replace/modify the ("AN27:AQ33") in the code above using the variable integers; firstrowno, ltcol, lastrowno and rtcol ?
Would like to know the formula to sum up values based on a range of numbers.
For example, to sum value in Column B if the range in Column A is within 8100000 to 8150000.
Column A Column B
8110000 110.00
8130000 250.00
9100000 300.00
I have one Row that houses numbers 80-90 in seperate cells (11 columns A20:
K20) - these are my Numeric Labels.
I then have several other Rows that span the same number of columns as the
Numeric Labels (A21:K100) and house Numeric Values that relate to the Numeric
Labels.
I would like to AVERAGE the Numeric Values in each Row and have a Numeric
Label (value) that corresponds to the calculated average returned as the
result.
Example: Sample Data
A20:K20 (Numeric Label) 80 81 82 83 84 85 86 87 88 89 90
A21:K21 (Numeric Value) 07 06 05 03 09 09 00 02 04 12 10
Based on the above data - the Expected Result is 81
Average = 6; Return Numeric Label = 81
The leading zeros shown in A21:K21 is for alignment purposes only.
I would appreciate two formulas:
1) Includes zeros to be averaged
2) Excludes zeros from being averaged
I have tried variations on this =INDEX($A$20:$KJ$20,MATCH(AVERAGE($A21:$K21),
$A21:$K21,0)) but receive the #N/A error message.
I have a long list of numbers (1 to around 3000) in Column A and I need to print out only the numbers missing from that list. The numbers are sequential (except the ones missing) and there are no blank or missing cells, only missing numbers.
EXAMPLE:
1
2
4
5
7
.....
So I would only need to print the number 3 and 6. - it can be all in one cell, or in one column, it doesnt matter.
this formula and have tried various nested ifs and I can come up with a formula that works. What I am trying to do it to is detirmine what my multiplier should be based on a range of numbers. Let me try and explain lets say A1 is a number and B1 is a number and I need the Formula for C1.
If B1 is between 0 and 5 multiply A1 by 2 if B1 is between 5 and 10 multiply A1 by 4. and so on and so on. Is there an easy formula for this? I know it might be trivial but im stumped for some reason.
I have a range of cells (D10:D20) with numbers in them. I need cell A10 to look at D10 and return a specific number based on a set of criteria.
The same thing would go for A11:A20 & D11:D20.
If the number in D10 is 1-2 then A10 needs to display 0
If the number in D10 is 3-8 then A10 needs to display 0.1
If the number in D10 is 9-14 then A10 needs to display 0.2
If the number in D10 is 15-20 then A10 needs to display 0.3
Once I have that formula I know that i will just highlight A10 and drag the formula down through A20.
In my spreadsheet, each row of data in Column B starts with 3 numerics (e.g. 001) followed by some text. For example:
Cell B2 contains '001 - Text for this cell'
Cell B3 contains '002 - Different Text for this cell',
Cell B4 contains '003 - Different Text for this cell', etc.
I have hundreds of rows which follow this format.
I have had to insert several rows in my spreadsheet in between existing rows which has thrown off the numbering in the first three positions of my Column B cells.
Is there any way to update the data in Column B so the text data in each cell is retained but the first 3 numeric values are updated and again sequential?
I would like a formula to add up values in Col E based on a range of account numbers in Col C
For eg adding up Sales values in Col E based on Account number being series 3000-3015 in Col C (this particular series must exclude numbers ending in an alpha). I also have account numbers ending in an Alpha where I need to add up the values pertaining to these for eg 3000D-3015D, 3000K-3015K etc.
I need to check a range of cells for 2 different values. If either value is present, I need to shade a cell (outside the original range) red. If neither value is present I need to shade the cell yellow. Can this be accomplished with conditional formatting?
View 2 Replies View RelatedThis is a spreadsheet for a real estate office. The boss gave me a spreadsheet that he created to give a seller an idea how much money he will walk away with at closing. The spreadsheet includes all of the pertinate numbers but there is one item that he would like to have filled in automatically. When selling a house, you use a title service that charges a fee based on the price of the house. So, for example, If the house sells for $0 to $50,000, then let's say the fee is $112. If the house sells for $50,000 to $60,000, then the fee is $118. If the house sells for $60,000 to $70,000, then the fee is $125, and so on up to 1.5 million.
The boss' spreadsheet includes 5 different selling price scenarios, which I guess doesn't matter since you do the first one and the rest follow the same pattern.
So how do I automatically fill in a cell based on how one number falls within a range of other numbers? The fee schedule will be within the same spreadsheet, if that matters.
Ideally, I think they should be separate files, but this will be used in various locations as different realtors take it home or use it on their laptops.
In the attached workbook I'm trying to populate Column E with sequential numbers (as shown) based upon a changing range (defined as a named range called 'range'). Is it possible to write a formula in the cells in Column E that will do this?
View 2 Replies View RelatedCan anyone help me to get a validation to check that what is entered in a cell, lets say A1,
has to be number between 100000 and 899999 (this I already have) OR a value/text from I100000 to I899999. So it only acceots a vlaue betwwen 100000 and 899999 and it is also ok to have the letter I at the begining.
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI am using this formula: =INDEX(A5:Z5,MATCH(9.99999999999999E+307,A5:Z5)).
All the cells in the range A5:Z5 contain SUM formulas for adjoining cells in rows 1 to 4. The above INDEX formula doesn't work in this situation because many of the formulas in row 5 return a 0 value because there is no data in rows 1 to 4. If I delete the formula from all these cells, the INDEX function works OK, but I'd rather not do this.
Is it possible to amend this formula so that it returns that last numeric value >0?
I have been looking for code samples using Find to search for values within or outside a given value range. I haven't come across any that are obvious to me so is it possible?
I am using a piece of code that jindon here on Ozgrid has so kindly been helping me with. The code below searches for a certain value and returns that value when found along with other values. I am trying to adapt this same code to work on other searches I perform.
An example I am looking at is finding any values in column "K" which are either less than 700 or greater than 1300. How would I alter this code to perform a search like that?
Option Explicit
Sub test7()
Dim r As Range, ff As String, txt As String
With Sheets("Sheet1")
Set r = .Columns("av").Find("D00025", , xlValues, xlWhole)
If Not r Is Nothing Then
ff = r.Address
Do
I am stuck on this one. In the attachment I have values pulling into N3:N7 based on a drop down choice. Some of the numbers are numeric (no decimals), others are currency (no decimals), others are percentages (2 decimals), etc.
Is there a way to pull values I'm currently pulling into column N and have those values match the format of the source? I've tried converting it into TEXT but then I cannot place conditional formatting data bars on the values and have it work.
I want to be able to sort the columns in a worksheet based on their cell values, eg. column of text sorts A to Z and column of numbers sorts largest to smallest. Cells are formatted as General, number or currency but the sort button only offers A to Z or Z to A.
View 2 Replies View RelatedI am trying to write a macro in excel to clear all cells within a range that are non numeric. I seem to be going round in circles trying to find out how to do this.
I assume I have to use the IsNotNumeric(Target) argument but I can't find how to specify the target within a range.
If I have the following cells and values
A1 = 0
A2 = 0
A3 = ""
A4 = 0
I want a vba if statement that makes A5 = "Numeric.
If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0
I want A5 to = "Non Numeric"
Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""
I want a5 to = "Non Numeric"
Is there a way to do this without looping through each cell in the range?