When I input time in the h:mm:ss format it add a am/pm to it. I tried formating it to remove it yet it wont go away. What I am trying to do is add up time in the G Column but all I get is 0:00:00.. I added the [h]:mm:ss format to that cell... Does this have to do with Execl adding am/pm to the time? If it is how do I stop it.
View 3 Replies
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
View 2 Replies View RelatedIs there a way to cause a particular VB function I write to execute any time a value in a particular range of cells is changed?
I thought I had it when I thought I could do a sum formula, range on the cells to be checked, then call the function as a side effect of this sum. It was then that I realized I didn't know how to call VB from within an Excel cell formula.
1. Is there a way to call VB (say, sheet1.myFunction())?
2. Is there a better way to do what I want than to try to hack a side effect into a formula in a cell that depends on a sum (which "watches" for the changes for me.)
The cells would have text in them, not numbers, so using the sum-based formula would be iffy at runtime to me at best. What I really want to do is run a function on the cell value as a string. There are a lot of such cells (thousands) so ideally I would only need one external cell to activate the function (which scans all the cells I am concerned with) rather than have to paste a custom, relative formula into thousands of cells manually to have each one watch one cell, if you know what I mean.
trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies View RelatedRefer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
What I need is a formular/vba code that can divide hours into different time ranges. The picture below shows an explanation.
In example 3 there time range analyzed goes from saturday till monday. Here Sunday should get 24 hours and the time range 23-08 for weekdays is at this point 00-08.
I've tried everything I could imagine to get this one working,
I found this formula similar to other formula
NETWORKDAYS(D1,F1)-1)*"18:00"-"9:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"9:00","18:00"),"18:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"9:00","18:00")
By the way ....D1 = start Date
F1 = End Date
E1 = start Time
G1 = End Time
It's GREAT! But now I need include time from 6:00 a. m. to 10:00 p. m. (I already modified your formula:
(NETWORKDAYS(D1,F1)-1)*("22:00"-"6:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"6:00","22:00"),"22:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"6:00","22:00")) because are regular working hours in Colombia but:
1. All the days (Monday to Saturday) are working days
2. I just want to calculate the time in shifts, I don't specify the start date and end date. Example: 8:00 p.m. to 11:00 p.m. Result: 2 hours, because 1 hour is after 10:00 p.m.
This are two different options, so I need two separate formulas.
I need a formula to calculate the time (in hours/fractions of an hour) that is "covered" for each hour of the day between a range of times. In other words, I have a "START TIME" and an "END TIME" and for each hour of the 24-hour clock, I want to know how much time this range covers.
For example, if my start time is 3:30am and my end time is 5:15am, for the 3am hour, the formula would return 0.5 hours, for the 4am hour it would return 1.0 hours, for the 5am hour it would return 0.25 hours, and for all other hours it would return 0.0 hours. The range of START TIME and END TIME can be up to 24 hours (but not more), but the tricky part is that the START TIME can be on the day BEFORE the END TIME (e.g., START TIME of 10:35pm and END TIME of 5:45pm the next day).
I want to copy and paste a PARTICULAR RANGE from one workbook to another workbook. I want to select the data range from "09:55:00" to "10:00:00" which is in the cells in Column "A" an copy paste it to another workbook. The rows are not constant. The data "09:55:00" to "10:00:00" can e present on any row but is present on the same column i.e "A".
View 2 Replies View RelatedI have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Is there a way I can stop a range of cells from recalculating once the cells in that range have a certain value?
I'm a complete newbie when it comes to any kind of programming and so...I'd need a little bit of handholding with this.
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
Is there a way to specify a time range to do a specific task?
If Time Value is before 10:00:00 or between 13:00:00 and 16:00:00 Then Do 'THis.
I am trying to create a time formula for my own work i.e
1 to 6 min = .1 (of an Hour)
6 to 12 min = .2
13 to 18 min = .3
19 to 24 min = .4
25 to 30 min = .5
up to one hour
@ 150 an hour
So if I input in one row lets call it time 3 hours I will like in thenext row rate = 450
1.2 hours =180
6.5 hours = 950 etc
I have two columns containg the arrival and departure hours of workers. From these columns I must define the workshift by specifiyng the time range for each shift. AZ contain the arrival hours while BA the departure.
The formula I use doesn't return the results correctly because some shifts are almost the same. i.e: if shift one starts (arrival hours) between 05:00 and ends at 12:59 and shift 1-2 starts at 08:00 and ends at 23:59 then it will go with the first shift even though the times in range belong second shift.
how I would get Excel to count within time ranges?
For example:
car1 arrival/departure: 9:02 / 9:06
car2 arrival/departure: 9:02 / 9:04
car3 arrival/departure: 9:02 / 9:12
I want to be able to see how many cars are present during 5-minute intervals, so my results should be:
9:00-9:05 : 3
9:05-9:10 : 2
9:10-9:15 : 1
For small data sets I would do this manually.
I saw another thread using VBA, but I don't know how to edit that
I have attached a sample for better understanding. First of all, I need to check for the highest value in Col B and lowest value in Col C in the range from Time 0900 to 1100 only. I need to use the check time function (which i have no ideal how) rather than selecting the number of rows to check.
I need to add times of employess over a 2 week schedule.I have used a string variable to select the rows and columns as employees change.How do i add the times in this case.Sample code is below:
j = 12
k = 20
For i = 16 To 276
row_str = "A" & i & ":B" & i
Windows("TimeSheet.xls").Activate
Range(row_str).Select
Application.CutCopyMode = False
Selection.Copy
Windows("Report.xls").Activate ...................
I have some data, consisting of two columns. The 1st column consists of time values in the form hh:mm:ss, and the 2nd column consists of a pressure reading, taken every couple of seconds. I wish to find the average pressure from the start time, to a 2nd time, then the average pressure from this 2nd time to a 3rd time, then the the av. pres. from this 3rd time to a 4th time, and so on. The time i want to take the average over varies, sometimes 3 minutes (i.e. ~180 pressure readings), sometimes 4, sometimes 5 minutes. I have to take the average over different ranges dozens of times -
View 2 Replies View RelatedI have three sheets in My workbook and one user form. based on selection of checkbox in userform, I want to activate the respective sheets. While clicking on add button, I am getting error message " Run Time Error : Subscript out of range 9". I am using following code
Option ExplicitPrivate Sub Add_Click()
Dim ctrl As Control
For Each ctrl In UserForm1.Controls
If TypeName(ctrl) = "CheckBox" Then
TransferValues ctrl
[Code] .....
I am getting error on "Set ws = Sheets(Left(cb.Name, 1))" line.
I have used max and min function to display minimum and maximum time value; however, it is not displaying the correct time value from the list. I think there is a better formula to achieve this. From the sample data displayed below, minimum time value should be 11:30PM and maximum time value should be 6:30AM
See sample data below:
4/1/2013 11:45 PM
4/1/2013 11:30 PM
4/2/2013 6:30 AM
4/2/2013 6:15 AM
4/2/2013 6:00 AM
4/2/2013 5:45 AM
[Code]....
I have a column of start times which are entered as per 24hr clock and what I am trying to do is to is to sort the times out into ranges;
00:01 to 06:59, 07:00 to 19:00 and 19:01 to 00:00
The range is T7:T488 and here is my first formula for 00:01 to 06:59 which works, it correctly finds 35 entries;
I need to count the number of records having hospital admissions within one year prior to the index admission. The list of all admissions is in one worksheet, the index admission in another worksheet. They can be matched on ID number.
View 3 Replies View RelatedThis program is supposed to take the value in two combo boxes and use them to populate pivot charts that are in other spreadsheets. So a user would select PS and AMI on sheet one (s) and it would change the pivot table on s1-s9 to look up those chosen fields. I keep getting a subscript out of range error, and I'm not sure if my pivottable.pivotlayout method is correct, but when I recorded a macro (in the very bottom) using activesheet, it worked. How can I fix this?
The error occurs at the first large text, the second large text is the recorded macro.
how can i use countif or sumproduct or sumif ..etc to calculate how many occurrence in a specify date and time .
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
Setting up a worksheet to monitor bookings within a time range of 06:30 to 09:30 then from 14:00 to 18:00. The data is collected in the following ranges. E3:E25 M3:M25 E29:E60.
I need the data collected from 06:30 to 09:30 - deleted JUST before 14:00 Then need the data deleted again JUST before 06:30 the next day.
Range(Cells(1, 1), Cells(257, 257)).Select
This gives the Run-time error '1004'
I searched these forums for any old posts to work around this but did not find any threads. If anybody knows a good thread about this, I would be greatful.
Basically I run some code to generate Startcolumn, StartRow, EndColumn, EndRow. If there is a limitation of 256, the code is basically useless. I don't know of a way to use the A1 range method whilst using the Range("A1:....")
