trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I need to compare some cells, but sometimes one or two cells can be empty (but sometimes none of them)
e.g. A1 = January
B1 =
C1 = January
D1 = January
E1 =
and I need to compare this cells A1:E1 and if text in not empty cells is the same then write TRUE to F1 and if not write FALSE.
I currently have created a form for the user to fill in details on my sheet. My idea is that when the user clicks a button, the macro will take that piece of text and populate my other sheet into the correct column. Therefore the task I am trying to resolve is copy the text into a field and then if the user clicks copy again, the text will fill into the field below as it is empty and so forth until the user has finished entering values. I have the following setps in pseudocode below but having trouble converting it to a macro!
View 2 Replies View Related=IF( SUM(S7:Y7)="","",SUM(S7:Y7)) - Produces 0
=IF(SUM(S7:Y7)="0","",SUM(S7:Y7)) - Still Produces 0
What I am trying to do is if ALL cells S7 thru Y7 are blank then be blank otherwise sum them. I've used this on a single cell, but not to test a range of cells. What I use for a single cell would be like this...
=IF(S7="","",S7) - Will not produce 0 if the cell is blank, just leaves it blank.
I am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:
NextRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:
Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).
How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
Is there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.
View 9 Replies View RelatedWhen choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.
View 4 Replies View Relatedim having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
View 3 Replies View RelatedThe application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.
Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............
The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI require a VBA code to fill Zero for empty cell in seceleted Range. Range will be select by Mouse.
I try following Code.
But It will not sucessed.
HTML Code:
Sub Zero()
Dim ws As Worksheet
Dim Specifiedrange As Range
Dim Rng As Range
[Code]....
It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:
Formula:
[Code]....
And many of the variations of it when there are no empty cells in the range.
For a range of that contains empty cells I've tried this:
Formula: [Code] .....
And variations of it. It does not work, and I don't know why...............however..........
I ran across this on another [SOLVED] thread and it does work:
Formula: [Code] .....
I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?
It strikes me that this strategy likely has application elsewhere, too.
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
View 2 Replies View RelatedHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
When I input time in the h:mm:ss format it add a am/pm to it. I tried formating it to remove it yet it wont go away. What I am trying to do is add up time in the G Column but all I get is 0:00:00.. I added the [h]:mm:ss format to that cell... Does this have to do with Execl adding am/pm to the time? If it is how do I stop it.
View 3 Replies View Related