Sum Ranges From Every Second Sheet
Apr 12, 2008how do i sum Same Cell From Every Other Sheet (all in same work book)? this a situation where the sheets are not Contiguous. and i do not want change the sheets order
View 2 Replies
ADVERTISEMENT
Copy Ranges From Active Sheet And Post To New Sheet
Aug 20, 2014I have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
Copy of workbook attached : Weekly Accounts.xls‎
Copy Rows From Multiple Different Ranges Within One Sheet To Another Sheet With And / Or Without VBA
May 17, 2014The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
Copying Dynamic Ranges From One Sheet To Another Sheet?
Jul 7, 2014I have a separate sheet that I will drop a csv file into. On another sheet, I would like to copy that data. I know how to copy a cell and drag it to collect all the cells for the first go around, and this would work great if only my csv file had the same amount of rows each time, which it doesn't.
Is there anyway to create a macro to copy a dynamic range of rows from another sheet?
Selecting Ranges On Different Sheet Using Union
Nov 7, 2013I am writing a UDF to find the average of two ranges, which start at the StartDate and then go back a certain number of days, that are on another sheet. When I use Union to try and unite my two ranges the resulting range just equals the first range.
VB:
Public Function ModifiedAverage(StartDate As Variant, SheetTenor As String, History As Double)
Dim DateRow, NbCols As Double
DateRow = Application.WorksheetFunction.Match(StartDate, Sheets(SheetTenor).Range("A:A"), 0)
NbCols = Application.WorksheetFunction.CountA(Sheets(SheetTenor).Range("6:6"))
[Code] ....
Getting Macro To Work On Several Ranges On Same Sheet
Jun 24, 2014I have the following Macro:
Code:
Private Sub Worksheet_Change(ByVal Target As Range) ' Code goes in the Worksheet specific module
Dim rng As Range
' Set Target Range, i.e. Range("A1, B2, C3"), or Range("A1:B3")
Set rng = Target.Parent.Range("C13:D25")
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
[code]....
Which does not allow entry to range C13:D25 if D12 is empty. Works great!But I need it to work across ranges E13:F25 if F12 is empty, G13:H25 if G12 is empty etc.
I tried copy pasting the same macro over and over again but renaming it to e.g. Worksheet_Change2 causes the Macro to stop working completely.What am I doing wrong?
Copy Marked Ranges To Another Sheet
Nov 28, 2007I have this excel workbook that when i tick the first sheet ("251" in temp), it copys the row onto the second sheet ("order" in temp). This all work wonderful, but now if i would like to add additional pages to this excel workbook and have it do the same thing (by same thing i mean adding additional sheets but keep only one "order" worksheet and have all the information go onto the order worksheet.
So for example:
I would add an additional page name 252 into the workbook, it would look and function just like the 251. So after all the ticking on 251, all the information would go onto the "order", i can then move onto 252 and do the same type of ticking of information and those information would also continue onto "order". And i can keep adding multiple worksheet onto the workbook and do the same exact thing.
Copy 2 Fixed Ranges To Another Sheet After The Last Row
Jun 9, 2008I want the range B111:B167 from the hidden sheet copied to Column A of the questionnaire sheet 5 rows after the last used row on the sheet. There is text in cells C261 & S261 at the bottom of the sheet, so currently row 261 is the last row, but users could/might insert or delete rows, when answering questions. I then also want to copy the error check responses from C111:C167 to column N of the questionnaire sheet 5 rows after the last used row on the sheet, so the question # and response matchup. I then planed to delete any rows that have “Answered” in column N on the questionnaire Sheet. The Idea being the user can run the macro over and over until no questions remain.
View 3 Replies View RelatedConsolidate Ranges From Several Worksheets Into A Master Sheet
Jan 29, 2008I am trying to consolidate a specific range on 8 similar worksheets into a master list through the use of a macro, and the workbook has a total of 26 worksheets. Details:
The worksheets to be consolidated are named: AR, CM, JR, Trader1, Trader2, Trader3, Trader4, and Trader5. The range to be consolidated are: A6:F26, of each of the above worksheets. Currently, A6:D21 are linked through an array from the worksheet "Index". This is because there are often changes to the names listed under "Trader/Backup Trader", or there may be additions/deletions of a row.
Right now, I have set up a sheet called "Traders List", using arrays to link the data on the 8 different sheets. The only problem is, if there were a change in the "Index" worksheet, I would have to manually drag out each array, for these 8 different worksheets in the "Traders List" sheet. Is there a way a macro can be written such that it is automatically linked to each range (A6:F26) on those 8 worksheets? Is it possible to only show rows that are non-zero?
Dynamic Ranges (tables) Not Working On Protected Sheet?
Sep 10, 2013I have a data set that is defined as a table (Ctrl + T). There are formulas so I locked those cells and Protected the sheet. If I am at the bottom right cell, and press Tab to add a new row, I get an error message: "Cannot use this table functionality on a protected sheet"
I really need to protect the cells with formulas so that the are not accidentally deleted. But I also want to retain the Table format.
Is there a way around this without using VBA?
Write Names Of Named Ranges Of Specific Sheet Into Array
May 21, 2008I am trying to enter only the named ranges in the active worksheet into an Array.
The amount of named ranges can be from 4 to 7 per sheet.
I'm self taught at VB (This posts on this forum have taught me - thank you!) and have got the below code working on a Workbook - but not on a worksheet level.
ActiveSheet.Names.Count returns nothing, changing to ThisWorkBook.Names.Count returns the sum of all .Names in the workbook.
Sub aTest()
Dim sArray() As String
Dim sJoin As String
Dim y As Long
x = 1
y = ActiveSheet.Names.Count
z = ActiveSheet.Name
Copying Specific Cell Ranges From A Worksheet Multiple Times To A New Sheet
Nov 9, 2009I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once.
Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
Loop Through Specific Ranges From All Sheets To Summarize Data In Report Sheet
Jul 1, 2012i attached link to sample and its contains employee sheets and Report sheet ,and in Report sheet there is comment
[URL]
Move Ranges To Corresponding Ranges Based On Column Having Data
Oct 25, 2007I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View RelatedMacro To Print Sheets With Value In Cell A1 But Print Dynamic Ranges On Certain Sheet
Sep 24, 2013I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
Copy Or Move Column Ranges From 1 Sheet To End Of Column Range Of Another
Mar 7, 2008I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
Date Between Multiple Non Contiguous Date Ranges On Another Sheet?
Nov 8, 2012I have been looking at a post number 170404 which NBVC answered with an example grid. This was while I was trying to bring searched data through to another sheet and this is just what I was looking for as a brilliant start,
I have attached my very similar example in my scenario. I have also got NBVC's example on the first two sheets of this as reference. In addition I am also bringing through from-to date ranges which I then need to be applied to a Booking Sheet so I can see that these dates are booked for this person, and ideally where they are going and what they need to do there by colour.
I tried, just as a test in this example the following. Please note that this only had the three ranges as I was testing an example coordinator which returned three date ranges. It could be that the example returns 20 or 30 ranges that need to be applied to the rather primative Booking Sheet.
=IF(OR(AND(C10>='Coordinators list'!F5,'Coordinators list'!L5<=C10),(AND(C10>='Coordinators list'!F6,'Coordinators list'!L6<=C10)),(AND(C10>='Coordinators list'!F7,'Coordinators list'!L7<=C10))),"yes","no")
It seemed to give the right answer initially but trying different dates it gave the wrong result. It seemed to be checking one of the ranges and not all of them. As mentioned above this was just an example to see what I could get working but I don't think that this would be the ideal way of doing this as it would need to check 30-40 maybe more ranges depending on what comes back from the coordinator search.
The aim would be to choose a co-ordinator on the Site Planner sheet and ideally return the city rather than the yes/no in the Booking Sheet for that date and use conditional formatting so that if the type from the Site Planner Sheet was paint it would fill in one colour, clean in another, etc.
Was hopefully trying to get this done without using any VB as I am trying to resolve this for my Wife she isn't very tech savvy and and I need to be able to explain the formulas!
I'm sure you will see from my sheet I have given this a good go but I am a bit unsure on what some of the formulas on NBVC sheet are doing, and that this is my first attempt at doing anything like this. I have also tried using lookup and match but I'm still having issues that they either aren't always in date order and it seems to return no if it doesn't match the first range. The other main issue that I have seen is that I need to check whatever ranges the selection comes back with rather than adding each one to search through.
I hope this becomes a bit clearer on the sheet I have attached,
Locking Different Cell Ranges Then Locking Whole Sheet With Macros
Jan 4, 2010I have been assigned the task of creating our new integrated time and leave sheet in Excel 2007, previously we had 2 sheets, one for times and one for leave.
The problem I have is that I need to protect the authorisaton columns therre are 2 one for AM and one for PM, so that only Managers can authorise leave by inputting a password and then initialing the leave.
What I then need to do a the end of each month is for the manager to be able to click a Button with a Macro which will then lock the whole worksheet so that employees cannot change their times after the manager has checked the sheet.
I can lock the authorisation columns and password protect but I have to enable protection on the sheet, when I do this I cannot then figure out a way of running a macro which will then protect the whole sheet and assign a password to it so it cannot be changed after being checked and signed off.
I have tried to create a macro (button) to remove the protection on the 2 columns and then reapply protection to the whole sheet with another button but to no avail.....
If anyone has any suggestions I would be eternaly greatful.
Passwords on the sheet for the different buttons are abc or cobra.
You can download my Spreadsheet here.
[url]
Static Ranges And Dynamic Ranges
Feb 26, 2010definitions for static ranges and dynamic ranges?
View 9 Replies View Related2 Input Vertical Ranges Need Formulas To Output 2 Vertical Summary Ranges
Mar 7, 2013I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
Copy Ranges & Add Them To Other Ranges
Nov 1, 2006In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
Define Only 2 Named Ranges From List Of Named Ranges
Apr 28, 2014I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
Copying Cells From One Sheet To Multiple Sheet And Naming Sheet As Copy Text?
Dec 24, 2013I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
Creating New Sheet From Template Sheet & Filling In Summary Sheet - Userform
Oct 22, 2007I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
Copy Data From One Sheet (Fixed Cells And Sheet) To Another Sheet
Apr 18, 2009I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
Copy Sheet & Create New Monthly Sheet From Present Sheet
Jan 12, 2010I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
Comparing Sheet 1 With Sheet 2 / Moving Any Duplicates To Sheet 3
Feb 28, 2014Is there a way I can compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates from sheet 2 over to sheet 3.
For instance,
Employee Numbers that match in both sheet 1 and 2, remove that row from sheet 2 to and insert it into sheet 3.
Copy Data And Sheet Name To New Sheet And Delete The Old Sheet?
Mar 30, 2014Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
Comparing Data Between One Sheet To Another Sheet And Paste To Different Sheet?
May 14, 2014This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
Merge All Sheet In Workbook In Last Sheet With Sheet Name For Each Entry?
Mar 25, 2012I have workbook having around 25 sheets and i want macro to merge all sheets except first (summary) in to last sheet ( mergedata ) inpute data will be start from cell A17 in all sheet. also sheets may be add or delete as per requirement. after merge data from sheet name should add after each entry .
attached sample file for your reference.
[URL]
