Sum On Multiple Conditions In Multiple Columns
Nov 29, 2008
My data looks somewhat like this :
X Y Z
DOU Quarter Sum
0 Q1 = sum of 1's in Q1
1 Q1 = sum of 1's in Q2
1 Q2 = sum of 1's in Q3
0 Q2 = sum of 1's in Q4
1 Q3
1 Q1
1 Q4
0 Q2
A cell in the SUM column must contain the sum of 1's in column DOU if under column Quarter the value is Q1. Similarly for Q2, Q3 & Q4 if only the corresponding value under DOU is 1.
Its like.. count the number of 1's per quarter and come up with the sum in 4 distinct cells for each quarter.. i.e. quarter-wise sum/count of 1s
View 9 Replies
ADVERTISEMENT
Dec 18, 2013
I am a teacher creating a grade book in Excel. Each student is in a single row, with columns for the various assignments. For data analysis purposes, I am trying to develop formulas to make two different calculations.
The first calculation is simply the average quiz grade for all students, for all quizzes.
The second calculation is the average quiz grade for all grades that are higher than zero. This will tell me the average quiz score for quizzes that have actually been attempted.
I do need to track students that have withdrawn from the class, so column A will contain the letter "w" if the student has withdrawn from the class. If the student has withdrawn, the grades for that student should be ignored in the calculations.
Since I do accept quizzes after their due dates, a particular quiz score will have an entry of "L" if it has not yet been taken. These entries also need to be ignored in the calculations.
See the attached workbook for some sample data and the expected results.
Sample Workbook.xlsx‎
View 4 Replies
View Related
Mar 17, 2009
Im trying to have a formula look at two diferent columns and if they meet the criteria add the third column.
I tried using sumproduct but It wont give me anything but error messages or a zero.
Looks like this
=SUMPRODUCT(A:A="Stewart",(G:G="Fiduciary"),C:C)
Need it to say:
if column A = Stewart and Column B = Fiduciary then add up the amount in Column C
View 9 Replies
View Related
Jan 15, 2010
I want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.
A B
1 1.00
2 Yes 4.78
3
4 5.00
5 Yes 4.89
6 11.99
So this example would count 3
View 3 Replies
View Related
Oct 8, 2007
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
View 11 Replies
View Related
Aug 21, 2009
1. I have 4 columns (let's say D,E,I,J);
D E I J
Account1 Sum1 Account2 Sum2
151 93,79 BF2479 30,00
1476757 93,79 BF7 22,00
BF2479 30,00 151 93,79
86041 84,03 23235 30,00
534 6608,45
2. I need to clean the multiple identical data in the list by both Account no. and Sum (of course the list is much longer!) so that the list should look like this:
D E I J
Account1 Sum1 Account2 Sum2
1476757 93,79 BF7 22,00
86041 84,03 23235 30,00
534 6608,45
I must say that I am a beginner in Excel, so I tried to use this:
=IF(OR(E5=$J$5:$J$430);IF(INDEX($I$5:$I$430;MATCH(E5;$J$5:$J$430;FALSE);1)=D5;"";E5);E5)
for column E, and
=IF(OR(J5=$E$5:$E$452);IF(INDEX($D$5:$D$452;MATCH(J5;$E$5:$E$452;FALSE);1)=I5;"";J5);J5)
(which is reverse of the first one) for column J; (The ranges are the ones used in the real sheet), not for the ones in the example above!); The formula does seem to eliminate a dew unwanted data, but does not give me all the wanted results!
View 4 Replies
View Related
Oct 16, 2009
I'm trying to divide my data into 6 different groups, based on 2 different criteria. First, I am not sure how to write the logical test to take 2 columns of data into consideration (using "&" and "AND" do not work; I am not sure what else to try), and second I can't figure out how to write the formula so that it can select from 1 of 6 conditions.
So, overall here is what I want:
If DL2=3 and CK2=1, then I want this to be labeled as '1'
If DL2=3 and CK2=2, 2
If DL2=1 and CK2=2, 3
If DL2=2 and CK2=2, 4
If DL2=1 and CK2=1, 5
If DL2=2 and CK2=1, 6
These 6 conditions cover all possible combinations of numbers in the two columns.
View 13 Replies
View Related
Feb 7, 2014
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
View 6 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Mar 13, 2014
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
View 2 Replies
View Related
Nov 7, 2009
I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
View 9 Replies
View Related
Sep 28, 2012
Want a single count of multiple columns based on the columns selected value. Data is in text format.
Have tried multiple COUNTIF statements and have tried using pivot table (Excel 2010) both only give me total counts for all. I think I need an OR statement somewhere, but not sure where?
In other words, if a single record has an "any" in the any fields or a "yes" in the yes fields, I want to to count that as one record.
Sample data:
Pegnancy Smoke
Pregnancy Alcohol
Pregnancy Marijuana
Pregnancy Powder
Stress Cigarettes
Stress Marijuana
Stress Alcohol
Stress Medication
[Code] .....
View 2 Replies
View Related
Jul 28, 2013
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
View 5 Replies
View Related
Jan 15, 2013
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
View 12 Replies
View Related
Feb 27, 2014
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
View 6 Replies
View Related
Dec 18, 2006
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
View 9 Replies
View Related
May 4, 2014
I have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
View 5 Replies
View Related
Jan 23, 2012
So, another question with regards to this sales sheet that i am setting up. I want to be able to take the information below and for each of the people listed (i.e. by their initials) i would like to...
1.) Take their associated % (Columns C, E, G)
2.) Multiply the % by the Revenue (Column H)
3.) Sum up the total for each of the names (Locatedin Columns B, D, F)
4.) Only sum up the ones that occur in Month 1 of the Year 2012
I have tried multiple ways with a Sumproduct but none of them have worked. I would love to be able to do this with a single formula without having to add another column, for instance, to track what MonthNum it is. I tried using some kind of offset, but i could never get it to work.. For instance to look through the range, find the initial go over 1 column to the right and multiply that % by the revenue if the Month is 1..
Date (A)Rec1Name (B)Rec1Pct (C)Rec2Name (D)Rec2Pct (E)Rec3Name (F)Rec3Pct (G)Revenue (H)1/1/12AD25.00%RU25.00%BF25.00%1000.001/1/12AD25.00%RU25.00%PNF25.00%2000.001/1/12BF50.00%00.00%00.00%1200.002/1/12BF50.00%00.00%00.00%1000.002/1/12BF50.00%00.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1500.004/1/12AD16.67%RU16.67%BF16.67%1500.004/1/12BF50.00%00.00%00.00%1500.00
View 3 Replies
View Related
Oct 29, 2008
I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
View 9 Replies
View Related
Aug 18, 2007
I have an excel workbook with 8 worksheets. Each worksheet has vertical columns (approx 250 columns per sheet) of numeric data. Is there a function or macro that will combine all of this data into one vertical column without having to individually cut and paste each one into the new column?
View 3 Replies
View Related
Jan 28, 2014
I'm looking to find a formula to calculate the red cell (actually all the cells in the "type" fields) by determining:
1) If the Product in the table matches the one in row 3
2) If the dates in table columns H, J, L, N and P took place in the month before the billing date
3) If those two conditions are met, sum the matching columns in I, K, M, O and Q.
For example for the red cell would currently equal $11,380.02 as the only revenue collection dates in range would be cells I1 through I3.
View 7 Replies
View Related
Mar 4, 2014
I am trying to improve how I write my formula. In this case I have replaced this horribly long formula:
=SUMIFS(Amount,CAAPartner,$A10,TransactionAccountFunction,"CRT",TransactionSource,
"MC",ClassCode,"PR",TransactionCategory,1,TransactionCode,3006,ChargeOff,"OK")
+SUMIFS(Amount,CAAPartner,$A10,TransactionAccountFunction,"CRT",TransactionSource,
"MC",ClassCode,"PR",TransactionCategory,1,TransactionCode,3031,ChargeOff,"OK")
[Code] ....
with this nice shortened version:
{=SUM(SUMIFS(Amount,TransactionAccountFunction,{"CRT","SCR"},TransactionSource,{"MC"},
TransactionCode,{3006;3035;3031},ChargeOffCredits,{"OK"},CAAPartner,A10,ChargeOffCredits,"OK"))}
I have pieced this together using information on various forums and it appears to work, but I have a question:
What is the difference between using a comma and semi-colon in this new formula?
View 3 Replies
View Related
Oct 10, 2008
I have a large spreadsheet that contains and employee number and then up to 5 entries of Dependants (each has its own column). What I need to do is have 1 for each of the dependant information instead of 5 and have multiple rows for the employee if they have more than one dependant.
At the moment I am sorting the data by dep 1 name, pasting the data into a new sheet, deleting all the dep 1 stuff, sorting by dep name 2 and pasting that.........etc.
It doesn’t take too long to do but I just wondered if there might be a quicker way as this will be something I will need to do more often.
View 2 Replies
View Related
Mar 4, 2009
I have VBA code below. Currently the code allows me in column "N" to choose more than one item in a dropdown menu. I am trying to find a way to make column K and M do the same thing. I have tried a number of ways but to no avail.
View 2 Replies
View Related
Apr 13, 2009
I'm trying to do is develop a formula to:
- look at one column in sheet 1 and if a value in that column equals a value in another column in sheet2. then, display an X
View 6 Replies
View Related
Feb 21, 2013
Im trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
View 1 Replies
View Related
Jul 10, 2013
create a formula,for multiple criteria with multiple results in rows.
[URL]
View 1 Replies
View Related
Aug 10, 2007
I am trying to consolidate information from multiple (atleast two or more) worksheets (in the same workbook) into a single sheet.
The worksheets have identical column headings. There are 4 columns in each worksheet. The first three columns are text strings (and some cell in these columns may be blank). The fourth column is an integer. The number of rows in each worksheet is most likely to vary. Within a worksheet the rows are unique. However, some rows may be duplicated across worksheets.
To reiterate, here's what I am trying to do.
Step 1. Create a summary sheet.
Step 2. When there is a unique row (identified by the first three cells in that row) across worksheets then I have that row as is in my summary sheet.
Step 3. When there are duplicate rows (identified by the first three cells in that row) across worksheets, I want to add up the cell in the fourth column associated with those row in my summary sheet
I have tried union (works only within a sheet), consolidate (works only with a single column). I don't need the sophistication of a pivot table but simply an aggregation of data
I am trying to do this using macros (within an add-in)
I have enclosed a sample workbook with the expected output. I created this workbook by hand in an attempt to clarify my problem statement.
View 4 Replies
View Related
Aug 9, 2009
If ActiveCell.Value < -25 And ActiveCell.Offset(-2, 0).Value < -25 And ActiveCell.Offset(-3, 0).Value < -25 Then
Range("C4").Select
End If
End Sub
I am looking to do something similar on excel 07 as follows:
Range("O16").Select
IF ActiveCell.Offset(0,-1)Value ="1" And ActiveCell.Offset(0,-2).Value = "1" Then
ActiveCell.Value = "1"
Compile error expected: Then or GoTo At the First value (which I have highlighted in red)
Also would like the If formula to repeat for range O16:O36.
View 9 Replies
View Related
Jan 29, 2007
see attached workbook.
I need to create a conditional sum in the report tab in the yellow cells that will sum all the values from the list sheet, based on the following conditions.
1) The name is in the list
2) The code in the list is one from the codes tab.
I saw somewhere that I need to put an 'OR' statement in the conditional sum but I can't get it work. It seems to add up values for the code 'HOLIDAY' and I don't want it to.
View 3 Replies
View Related
