Column A shows a list of groups within an organization. A row across the top displays the month and year.
In a separate worksheet I have a table that shows a list of names, the group they work in and the range of dates they will be working in their group.
I'd like to create a table that calculates the number of participants/group by month.
I'm trying to do is calculate pay for mileage while factoring in the number of participants. In other words, if the mileage was between 0 and 50 miles, and there were 5 or less people, then this cell should be $35.00. But if it's between 0 and 50 and there were more than 5, then this cell should display 175/the number of people (175 being 35 * 5). In other words, more than five people would receive an equal amount of the total pay for five people (this is because five people are the standard, but there are instances in which six or seven could participate and I was hoping to avoid hardcoding that).
The rest of the if statements simply follow that same formula, but for different mileage/pay rates.
I'm looking for a way to have a formula that adds to a number based on whether or not it's past a certain date.
So the starting number is in cell D1. A1:B4 contains dates and numbers to add to D on a certain date. In column F I want the formula to look at the date in column E and then make any additions to the number in D1 based on the date and the numbers from in columns A and B.
So as an example, 03/02/15 would be 90, since since we're adding 20 from 01/15/15 and 02/15/15.
A
B
C
D
E
F
G
1
01/15/15
20
50
12/28/14
[Code] ....
How do I summarise the attached table. I want to have a drop down menu in the MONTH cell (B13) that summarises the month nominated. Also a drop down menu in CATEGORY that I choose (B14). The value of the category in any particular month is totalled in B15.
I know how to create drop down menus and how to define ranges - just not sure of the formulas to use in order to get the correct answer in cell B15....
Problem,
A B C D E F (B+C-D-E)
Date Opening Stock Purchase Sales Consumption Closing Stock
17/7/2012 10000 5000 1000 2000 12000
17/7/2012 12000 2000 2000 1000 11000
18/7/2012 11000 0 1000 5000 5000
18/7/2012 5000 10000 3000 0 12000
Note : I want the above result as shown below datewise but no duplication of date but summing up of column C,D and E which is in above.Pls note that this is accounting question and also plz note that Opening stock(column B) from next date onwards must be equal to previous date closing stock(Column F).
Results :
A B C D E F (B+C-D-E)
Date Opening Stock Purchase Sales Consumption Closing Stock
17/7/2012 10000 7000 3000 3000 11000
18/7/2012 11000 10000 4000 5000 12000
(B=F)
if I could get the formula in excel ,since this is the sample data as I do have a numerous & huge data like shown above datewise where I need to add C ,D and E but Opening stock(column B) from next date onwards must be equal to previous date closing stock(Column F).
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
View 3 Replies View RelatedI am trying to create report of the in and outs of tools we are shipping for repair.
Currently in Tab 1
Column F - Date shipped for repair
Column G- Vendor Name
Column H- Date Returned
What I need in Tab B
Vandor - Total Sent- In Repair @ Vendor- Total Repaired - Total Unrepaired
Here are Images if it makes it a little easier to understand
The Info I currently have
image1.png
The info I required filled out based on the previous data
image2.png
I would like to get the sum of a range in VBA and tried the following that did not work:
S= Sum(Range(Cells(1, 1), Cells(1, 6)))
In column B is a list of dates, which are broken out by fiscal year (FY=7/1/ to 6/30). Column C is a list of dollar amounts. Cell F3 is the query ‘start date’
Cell F4 is today's date, which will be the formula: =today()
Using a date range of F3:F4, I'm trying to get each cell bordered in red to query the dates in column B for each FY; then display the matching sum from column C.
For illustrative purposes I went and manually determined what the values should be displaying as of 7/22. Here are a couple of examples of how I am trying to get the formula to work.
Example 1
FY’08:
Start date- 7/1
End date- 7/22
Searching cells B1:B94, cells B1:B13 fall within the start and end date parameters listed above. Sum of cells C1:C13 is $45,112.00, which should display in cell F6.
Example 2
FY’09:
Start date- 7/1
End date- 12/13
Searching cells B95:B222, cells B95:B149 fall within the start and end date parameters listed above. Sum of cells C95:C149 is $150,873.03, which F7 should display in cell F7. How to I type up this formula; its way more challenging that I first thought!
I have a set of 50 large spreadsheets each with the same size and structure.
I have a summary sheet which contains cells that each contain a single-cell 3D range across all the sheets.
But I'd like to modify this summary sheet to find a way of summing a subset of the 50 sheets according to a given criteria.
I imagine this could be a single criteria added to one cell in each of the 50 sheets.
Or perhaps it could be a letter in each sheet's name. eg, if the letters used as criteria are say G, P and S, I would name the sheets something like G1, P2, G3, S4, P5, ....S49, G50.
Perhaps this could be achieved with the indirect function or will it be necessary to resort to VBA?
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
Here is my set up:
A2 to BF2 is a range of dates
A3 to BF3 are sales. Days without sales are 0.00
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
I have a spreadsheet which has data in rows. I need to sum the first 5 values from the left of the range which are greater than zero. BUT if there are less than 5 non zero values present I want to sum from the right of the range.
First condition:
1 2 3 4 5 6 7 8 9 10
The function would return: 1+2+3+4+5 = 15
Second condition:
0 0 0 4 5 6 7 8 9 10
Function would return: 4 + 5 + 6 + 7 + 8 = 30
Third condition:
0 0 0 0 0 0 0 8 9 10
The function would return: 10 + 9 + 8 = 27
I have had success with:
=B4+SUM(SMALL(IF(I4:O4<>0,I4:O4),ROW(1:5)))
(using ctrl shift enter)
BUT it crashes when faced with the third condition.
I would also like to avoid ctrl-shift-enter functions if I can as I don't have much success copying them around the spreadsheet.
I have three columns. Lets assume i have One header row and 3 rows of actual data and the 4th row is for totaling column B values.
Column A is a col of "Ingredients", column B is the amount of the ingredient (from col A) used. The value is either in Oz or Lbs. Can be either. Column C is a yes or no column. If the value is Yes then i want to have the value in col-B included in my overall sum which is in the 4th row. If the value is No then i do not want the value in col-b (in that row) included in the overall sum.
Any ideas on how to do this?
Thanks.
david
Trying to do the following. Look at a range of cells in a row, say A1- H1. Sum the last three cells that have a number in them versus being blank. So, let's say the last numbers in row 1 are in cells B1, F1 and H1, but in row 2 they may be in cells E2, F2 and G2.
View 3 Replies View RelatedI'm working on a worksheet that has dates in one column (column A), and numbers in another column (column B). What I'm looking to do, is look through all of column A, find all entries between a certain date (ie Nov 1 07 - Nov 30 07), and sum all the values in column B that correspond those fields, as long as the value is greater than zero or not blank.
So, for example,
A B
Nov 1 1
Nov 6 -5
Nov 3 6
Dec 6 5
Jan 1 2
I would need the formula to return 7
I have the following code with uses a cell color to count the number of cells in a range with the same cell color:
Function CountColor (rng As Range, color as Range) As Long
Dim c as Range
Application.Volatile
For Each c In rng
If c.Interior.ColorIndex=color.Interior.ColorIndex Then
CountColor = CountColor +1
End If
Next
End Function
What I would like is instead of just counting and returning the number of cells of the same color, is for the code to return the sum of the values in the cells of the same colors. Cells being evaluated contain numbers from 1 to 300.
I have to work on a sheet where the value in the cells is from a call to the GETPIVOTDATA() function. This may return #REF depending on the data. I need to sum a range of such cells treating a #REF value as zero. In another part of this sheet this is done by {=SUM(IF(ISERROR(D6:D17),0,D6:D17))} but as soon as I go to edit the formula the {} disappear and the formula wont work if I edit it. Putting the {} back in manually doesn't work either. How can I repeat what has been done before. (The sheet was originally created by consultants who have long gone and I have inherited it!)
View 2 Replies View RelatedIn Cells B2:B100, i have dates that which have been entered using a combo box (the dates type is for e.g. 14th March 2010 format)
I want a formula that will count the cells that have dates between 1st April 2010 to 30th June 2010 in cells B2:B100
Also, I would like a formula that counts weekend dates between 1st April 2010 to 30th June 2010?
I have a masive table of dates (the date is created via a if formula)
what i need is so wheni enter 2 dates in 2 cells the system checks all the dates between the two specified and then returns the contents of them to a small area on the page.
Dates To Test 14/08/2026 19/08/2026
Results
14/08/2026
15/08/2026
16/08/2026
17/08/2026
18/08/2026
19/08/2026
Table..............
i dont mind using script or anything like that, i dont have much knowlage of it but do have coniderable understanding of other langages and usually figure it out :D
I often find myself in the following situation - I will highlight a range of numbers to see what the sum is in the bottom right hand corner (the cells which I select areoften not all within the same column or are not consecutively listed under each other) .Depending on the circumstances I will then type out a SUM formula with the range to put that value somewhere in the spreadsheet - the problem being that I have to deselect the cells and then re-select these within the formula. When I have selected many numbers, it is not always easy to remember every number which I included.
As a way to remember the numbers, I format those cells in a certain colour before I do the SUM formula and would then include only those coloured cells in the formula. I would like to avoid this extra bit of work.
I am new to VBA but would like some form of code that allows me sum the contents of a selected range and paste that formula beneath the last value in the range - the range would have been selected before running the maco.
Im struggling how to even start writing this code. What im trying to do is go down column S from row 2 down and sum up each cell until the sum = 700 then delete all the rows below that with some thing in them.
View 2 Replies View RelatedI have a spreadsheet which links to an external source, runs a sql msquery and retrieves data based on dates selected by the user from two drop down lists. From Date and Date To.This works fine. However I also need to total any fixed data which resides in the same spreadsheet based upon the same dates selected. The end user selects 2 dates , say 15/04/2007 (this relates to a week number,week15)and 28/04/2007(week 17)
A column of data lists the week numbers (in cells A3 - A22) and next to this their respective production quantities in cells B3-B22.
I now have a problem in totaling the production quantities in the worksheet as my user is not just selecting the week numbers 15 and 17 but 15,16 and 17.
qty
week 15100
week 16123
week 1789
How do I sum from 15 to week 17 inclusive or any other range selected?
I'm trying to find a formula to work out if i have 2 dates, sum data between those dates, but only if
So i kind of need a sumif/sumproduct in one?
What i need to do is this. Find enquiry made for the Hyatt between the 26/04/2014 & 20/06/2014
Hyatt
26/04/2014
20/06/2014
I have managed to do a sum product to find the enquiry between the date range, but can't get it to add on ONLY for Hyatt.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedTrying to count how many days from a set range of dates are within another range.
So for example, the first two dates, 7/29/2014 - 8/5/2014 would be 6
7/31/20148/6/2014 are the set dates
Count Days Within Range.xlsx
I've been working on a spreadsheet and these forums have been a great help. I'm now at the very last section and, surprise surprise, it's also the hardest!
I'm creating a stock trade recording sheet. I have a userform ask the user to enter a date, a time, the number of stock purchased, and the price of the stock. These are then entered in a new row.
Now what I want to do is have summary cells which say how many stocks were purchased and the total profit made for each day. Since each time is given its own row, I can't know in advance which rows to sum over. I also don't know on which days a trade was made. So a summary cell should only exist if a trade was made that day.
Could I do something like.... check if the date matches then sum over all the values for that date? So if column A has the dates, can I say "Search which rows in column A have this date" then "for those rows, sum column C"?
Also, how would I create a a row for each traded date's summary cell and enter the date in it? I've attached a spreadsheets which manually demonstrates what I want to do (no macros) and a spreadsheet with what I have so far (basic macros).
Any and all help much appreciated, I just need to get my head around creating and dealing with variable ranges. Is that a really advanced task? I don't think this is a one line solution so please bear with me while I make mistakes!
I tried to do this using a IF THEN formula but it doesn't work or more likely I am not writing it correctly or its not the right formula to be using. It's on the attachment.
I have a worksheet that has dates starting from "1/5/2004" to "1/18/2010". Each date is listed in column A.
I want to convert all the dates from MM/DD/YYYY format to only MM/YYYY and have it appear in column B.
The kicker is I need excel to recognize all dates that fall out between"01/01/2004 to 01/30/2004" only as 01/2004 and not 01/01/2004 or 01/30/2004 so on and so forth for each subsequent month and year.
How can I create a custom autofilter that will show me dates within 30 days of today in Excel 2003?
View 3 Replies View RelatedI am trying to solve a a problem that I am having.
I have a list of projects in one column and start dates in a different column.
I want to create a dashboard that breaks down projects by month, quarter and year to date.
I have tried various formulas centered around CountIf. Bottom line is I want to review a column of dates and determine how many projects started last month, etc.....