There are two cells on different sheets in which the user can enter data into either. Both cells should then show the same value. For example, if the user enteres 15 in cell SheetA!A1, the value in SheetB!A1 should equal 15. If, at a later time, the user enters 12 in SheetB!A1, SheetA!A1 should also show 12. Data can be entered in either cell so that eliminates the use of a formula. How do I do that (can I do that?) in VBA?
View 3 Replies
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
Is there still a way to show all cells in a worksheet that contain data..
Seems like each cell with data was a certain color...and a worksheet with only 1 or two characters per cell was created ...
If i have =SUM(C8:J8) in K8 and the sum of the values is 0
I only want to show 0 so long as there is a value typed in at least 1 of those cells (the value typed in those cells is often 0 fyi).
If all the cells between C8:J8 are blank then i want K8 to show nothing.
I am trying to show a value in a cell, based on the values found in other cells. Essentially, here is what I've got:
If C2 is greater than A2, B2, D2, then put the value found in C1 in E1.
i am having trouble putting together an IF Formula together with and/or. i need to do the following
if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.
=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))
i have tried if(and) and if(or) and no matter what i have tried it doesnt work
I have several spreadsheets referencing the "Data" sheet's table (about 35 columns, and the row lengths will differ from 10 to several hundred).
I need to be able to filter the table in "Data", and have the hidden rows not show up everywhere else in the document. I have both vlookups and index formulas in the other spreadsheets, and what I'd like to do is be able to filter by any column in the table and have only the shown results show in the other sheets.
I know this might be accomplished using subtotal, and Row, etc., but how to set it up with the different formulas I have going on in the sheet that pull data from the table. I need this to work with both the vlookups and index cells.
I have a column of data held in column B.
I am required to show the following.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
do I need a macro?, or conditional formatting?
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI am referring to the post made by NBVC at http://www.excelforum.com/excel-gene...xcel-help.html, Try: =IF($A1="",INDIRECT("A"&ROW()-ROW($A$2)+COLUMN(B1)),"") in B2, copied across and down
I have a similar case but there are no empty rows between lists, what would be the formula to get the same results? (The transposed address should appear next to each first line of each block).
Earlier, I posted at http://www.excelforum.com/excel-gene...-one-cell.html and I got brilliant answers, I also would like to get benefit of the above mentioned formula but in cases when there are no empty rows between lists.
I have trouble formatting certain cells to show $- instead of $0, and there is cell showing ($0.00) instead of $0.00. See attached file.
View 2 Replies View RelatedI am looking for a formula to fill C2 with either the value of A2 or B2 based on which ever is populated.
Col a & b are lists
a
b
c
1
Monthly
Quarterly
Period
2
Jan
Jan
3
Jan-Mar
Jan-Mar
I added an attachment with an example. You will see a matrix, with in the most left column an ID, then the headers of the matrix has different numbers that mean something.
What I want to do is, you fill in a number in the combobox, then press on a button and a report will be made on a new worksheet. With a list of the numbers and dates in the matrix that the ID has. Like shown in the example sheet in the workbook.
I have a list of names, some have first name and surname (in the same cell), and some just have first name.
Is there anything I can do to only show the cells that contain a first name and surname?
I am looking for a formula that will show the higher value of two cells
i.e.
A1 = 10
A2 = 12
A3 = formula to say look at A1 and A2 and show the higher number
I have two options in a Cell as Applicable and Not Applicable. This is in a Drop-down menu and what I want is that when I choose Applicable, it should bring up additional 5 or 6 cells for me to complete. And if I choose Not Applicable, the additional cells should not show up. The default would be Not Applicable.
I am trying to show a blank cell if the others don't have any figures in there and am using the following formula.
However, in my cell it is showing "#value" instead. How do I get my cell to look "blank" when there are no values in the other cells? Here is my formula
=IF(SUM(A17*D17)>0,SUM(A17*D17),"")
Please see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.
Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.
I have a list of customers and each customer has a commission value tied to it. I have a form and in it I have a cell that has a list of customers that someone can choose from a drop down list. If a certain customer is chosen I need their commission value to show up in another cell. example: How do I create a formula to show if Company A is chosen in cell G4 then the commission is 5% in cell G38 , If Company B is chosen then the commission is 8%.
View 9 Replies View RelatedI have a workbook that I want to show or hide a selection of cells depending on another cell when printing it.
Example
If cell x = A2A then display a certain cell set if anything else then exclude cell set from printing.
Is it possible to show gridlines in some cells and hide gridlines in others on the same worksheet? Is it also possible to isolate a row or column and change the size of selected cells without changing the size of the cells in other rows and columns?
View 5 Replies View RelatedFirstly, I am using Excel 2007.
The purpose of my sheet is a timetable.
What I have is a sheet from B2 to N32. What I would like to do is to be able to hover over a cell to show a date.
I have columns that represent the months, column B is January, coulmn C is February, column D is March, etc, etc. Right up to December in column M.
Row 2 represents the 1st of the month, row 3 is the 2nd, etc, etc, down to the 31st of a month.
What I would like to do is when I hover over, for example, cell B2, I would like a box to pop up to say something like, ' What would like to do on the 1st of January??', then maybe hover over H7 and then a box appears saying, ' What would like to do on the 6th of July?
I would like this to happen on all cells on the sheet.
Is there a way to count cells that show up with the "Not Available Error", or even better, is there a formula that will count all cells in range range, except those with the "Not Available Error".
View 5 Replies View Related=IF((C13>E13)*AND(B15>D15),0,1)*OR((E13>C13)*AND(D15>B15),0,1)
This function seems to work well, however there is one thing I want to add to it somehow, and I can't seem to make it work. I want the cell to show a zero if there is no information in cells C13 and/or E13.
code to write down to make a checkbox hide the text in a few cells..
What I want is..
When I tick the check box I want it to show me the text in the cells (C11:D11 to be specific) and then when I untick it I want it to hide the text so all you can see is the background colour.
Here is the attatchment of what I have so far:
In excel if you press F5Special, you will be given to select cells with some criteria but there is no criteria to select cells with zero value in a selected range. Is any such option is available in excel or a macro is needed for the same?
View 9 Replies View RelatedI need assistance with the following date range scenario: I have a date field where the user enters a date. I want the next field to automatically give the month of that date for example: user enters 01/01/2008 I want the next field to automatically say "JAN" etc.
View 5 Replies View RelatedI am trying to add 2 cell values together then show the total as a % of a value in a 3rd cell, however I also need it to allow for 0 values in the chosen cells without displaying an error message or it messes up the average formula elsewhere on the sheet?
View 2 Replies View RelatedIm trying to add Cells K2,L2,M2,N2,O2
For instance Column K2 could have the number "2" in it, but in K3 it might be blank.
L2 could have the number 3 in it, but be blak in L3.
M2 could have 50 in it or could be blank.
What I want for P2 to say is 2&3, if the cells in K2 and L2 show the 2 and 3. If it has the 50 in M2 thought, I want it show it.
For example: C4=5,C5=18, and C6=7.
I want A1 to show 4,5,18,7 (the values of cells C4 to C6).
I believe I have done this before, about 10+ years ago.
