Index And VLookup Cells Show Filtered Data From Table
Nov 4, 2012
I have several spreadsheets referencing the "Data" sheet's table (about 35 columns, and the row lengths will differ from 10 to several hundred).
I need to be able to filter the table in "Data", and have the hidden rows not show up everywhere else in the document. I have both vlookups and index formulas in the other spreadsheets, and what I'd like to do is be able to filter by any column in the table and have only the shown results show in the other sheets.
I know this might be accomplished using subtotal, and Row, etc., but how to set it up with the different formulas I have going on in the sheet that pull data from the table. I need this to work with both the vlookups and index cells.
View 1 Replies
ADVERTISEMENT
Sep 23, 2006
How do i use the Index Function for Filtered Cells. The code below will ignore the hidden or filtered cells. =INDEX($A$3:$A$100,B1)
View 6 Replies
View Related
Jun 10, 2006
I have a table A3:C118 and I am filtering the data and finding the subtotal for the maximum value in column C. How do I find the corresponding data point for column A? I have tried several formulas and they are not giving me exactly what I need.
View 3 Replies
View Related
Mar 2, 2009
I need a formula for F3 that will round-down E3 and find its corresponding row in the table to the right and find its intersection with the coating listed in I3. Does that make sense?
I've tried, to no avail:
=VLOOKUP(E3,$J$3:$Q$19,MATCH(I3,$K$1:$Q$1)+1)
=INDEX($K$3:$Q$19,MATCH(E3,$J$3:$J$19,1),MATCH(I3,$K$2:$Q$2,0))
View 2 Replies
View Related
Aug 22, 2006
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
View 5 Replies
View Related
Aug 22, 2006
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies
View Related
Mar 22, 2013
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
View 3 Replies
View Related
Oct 14, 2013
How to show my data as % of grand total and include the filtered data. Whenever I filter out a category in my pivot table the % values adjust for everything unfiltered. Is there a way to have my percentages include the filtered data?
View 1 Replies
View Related
May 2, 2014
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
View 8 Replies
View Related
Aug 26, 2009
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
View 6 Replies
View Related
Aug 22, 2014
From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.
View 7 Replies
View Related
Feb 26, 2014
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
View 2 Replies
View Related
Feb 7, 2007
I am trying to populate a table (a7:c27) in the attached sheet with data.
First, I must enter a number 1-16, which uses index function to return either "series" or "base"
If it is base, i want the number in the corresponding table filtered down - i.e. if 1 originally picked then h7 is (40) is entered into each month as base = constant.
If the result is series, then the data in i7:z7 is entered into the the 18 month table.
View 3 Replies
View Related
Jun 2, 2013
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies
View Related
Nov 12, 2013
I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.
I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.
Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.
I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.
Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.
Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty
[Code] ..........
View 4 Replies
View Related
Dec 31, 2013
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
View 3 Replies
View Related
Aug 18, 2006
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
View 7 Replies
View Related
Sep 8, 2009
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
View 9 Replies
View Related
Nov 1, 2013
How we can select specific cells in the filtered data using VBA in Excel 2010.
I need to select 10th column, 5th row data .. or 10th column, 6th row data .. or 13th column, 8th row data...
How to select this data using VBA.. I am struck here .. If I give the below code.. the hidden cells inbetween the filtered data is getting selected.. only the first row is getting selected correctly.. i.e, ..rnVisible(1, 2).Select .. If I change the row like rnVisible(2, 12).Select its selecting the hidden cells ..
Dim rnVisible As Range
Set rnVisible = ActiveSheet.Rows("2:10000").SpecialCells(xlCellTypeVisible)
rnVisible(2, 12).Select
MsgBox ActiveCell.Address
[Code ........
View 1 Replies
View Related
Jan 22, 2008
I have a list of Insurance payers - 20 or so. They are listed in a Pivot Table on sheet2 with rate data and such. On sheet1 I have a listbox with the Payers listed and can be multi selected by the user. I wish to have the user select some payers in the listbox, goto sheet2 and view the Pivot Table only containing those Payers selected from the listbox.
View 4 Replies
View Related
Apr 10, 2014
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
View 5 Replies
View Related
Mar 27, 2014
When I select anything under the Data Table drop down nothing happens. It is like none of the functions are enabled?
Data Table Picture.png
View 2 Replies
View Related
Oct 23, 2012
My first worksheet contains the following information:
Column A contains parent category names (e.g. colours)
Column B contains lookup values (non-unique)
Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A
B
C
1
Group
Item
Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A
B
1
Item
Amount
2
1
x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
View 3 Replies
View Related
Dec 12, 2007
I want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _
.PivotItems("01/01/1950").Visible = True 'to always have 1 populated
View 9 Replies
View Related
Apr 10, 2008
My goal is for any of my team members to be able to use a macro to delete all of the unwanted text from a fairly large worksheet and only show their specific information. I created it for myself and posted a slimmed down version of it below. Instead of the macro deleting any rows that do not have BRANDON SCOTT in column D, I want a pop up box to enter your name, and then any rows that do not have your name in column D will be deleted. I’m sure it is something simple, but I have not been able to find another forum with this information.
Sub MyTeam2()
With Columns("D")
. AutoFilter field:=1, Criteria1:="<>BRANDON SCOTT*"
.Resize(Rows.Count - 1).Offset(1).EntireRow.Delete
.AutoFilter
End With
End Sub
View 3 Replies
View Related
Feb 22, 2008
I have looked at the below Hide/Show Pivot Table Field Items help web pages:
Hide/Show Pivot Table Field Items
Hide Pivot Table Fields Pivot Items by Criteria
I am trying to use the above, but with dates in the following format in each cell:
YYYYMM
200612
200701
200702
200703
200704
200705
200706
etc, etc
The below code is working for >200702 and removes all years/months prior to this entered value. Unfortunately the code does not work when a user enters <200706, instead the code goes through to the “NonValidCriteria” prompt.
Sub HideByCriteriaYYYYMM()
'Declare variables
'SEE: [url]
'SEE: [url]
Dim pt As PivotTable, pi As PivotItem
Dim lMonth As Long
Dim strCri As String, strCri1 As String, strCri2 As String
Dim bHide As Boolean
Dim xlCalc As XlCalculation
View 4 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
Feb 5, 2014
I have a Takeoff sheet where an estimator enters a part# and the rest of the data is entered on the Takeoff sheet by using Vlookup to retrieve the information from the Products Sheet (there are about 12,000 products with 12 fields for each product). I need to then take all of the parts on the Takeoff sheet, and summarize the data, which is what Pivot Tables are for. The thing I cannot find out, is if this can be done. The machine keeps running out of memory (it has 32g, so I question that, and I tested with a 500 row sheet and got the same result), so I can never get the Pivot Table to actually create, or get a useful error message. Searching the web and this forum tells lots about Vlookup IN a Pivot Table, but not creating a Pivot Table from Vlookup data. I copied the data values to a new sheet to test the data and the Pivot created fine, so I believe the data itself is properly formatted.
View 1 Replies
View Related
Jul 5, 2007
I have a workbook where in Sheet1 Cell A1 is a customer name, and A2:A5 contain parameters for the customer. I would like to be able to input those data to a Vlookup table on Sheet2. (The Vlookup is used to fill values on Sheet3).
I have been trying to create a macro to copy those parameters from sheet1A2:A5 by finding the match for A1 in the Vlookup table in Sheet2 and then copying to the corresponding matching row , A2 pasting into column 3 (on the corresponding row of course), A3 into colum 4, A4 into column 5 and A5 into Column 6.
View 9 Replies
View Related
Mar 22, 2009
A newbie here.
I have numerical data in
range c3:c12
range f3:f12
Based on above two criteria I need to retrieve data in a Vlookup table, range gr1:gr510.
The Vlookup table range is gp1:gr510
View 9 Replies
View Related
