I have 5 worksheets in file Z on drive J which are full of VLOOKUP formulas pulling data from several files on drive K. Each worksheet pulls data from it's own file on drive K...ie, worksheet AB pulls all of it's data from file AB_2008, etc. On worksheet CD there are two rows which populate with #N/A when I open file Z, but if I open file CD_2008, the #N/A's automatically populate with the correct values. Any ideas??? I am not a programer but I have pretty fair excel skills...but this one has stumped me.
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
I have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
I am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly. worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
I would like to separate data into multiple workbooks based on a unique value in the column. For instance if I have Departments in Column F, that has data of accounting, HR, etc. I would like to put all accounting data into a accounting workbook and all HR data in a HR workbook.
I have 2 workbooks open and I want to set up formulas from one linking to the other. When I toggle on the task bar between the 2 workbooks they replace each other within the same window so I can only see one workbook at a time. How do I set it up so I can have 2 separate windows open at the same time, one with each workbook in it? I tried 'side by side' in one window but the viewing area is too small.
I have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
I have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
I have created a workbook for a co-worker. The way it works is data comes from an outside source with customer names in Column A and their Account Reps in Column H. This data is pasted into a template that I created with a very simple macro recording that filters on each Account Rep and is copied and pasted each into a different workbook. Then I had to go through each workbook (because of the info being sensitive) and create a macro that deletes the unwanted data because when the data is pasted it transfers all of the data and you can unfilter to see the full sheet.
I know there is a better way to extract data on each change in column H into a new workbook. Does anyone know how to do that? Another issue is the original data is not very clean so there are blank rows in the list. For Example:
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
I'm linking some data from 2 workbooks in the same folder (using excel 2013)
I have a main rota that works great, called "Main Rota.xlsm" I then have a separate basic file called Email Rota.xlsx without all of the bells and whistles of the Main Rota, purley made to email out to staff.
I store both files in the same folder "Site Rota" and it works fine.... until I rename the folder or move the folder to my laptop.
The link in the Email Rota looks like so to start (calling cell A3 from the Main Rota) ='[Main Rota.xlsm]Planning Rota'!A3
As I said it works fine until I move the folder onto my laptop the link then changes to
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB: Sub Create_Subfiles()
Dim FDMName As String Dim FBName As String Dim DIYName As String Dim WMName As String
I have 30 xlsx files in a folder and I want the first sheet of all that files to be merged to a new workbook. The thing is I don't want the macro to copy paste the value in to the same sheet of the new master sheet like Ron's excel merge tool does. I want a macro to create new 30 sheets on the master file and copy the data from source files. And I want the newly added sheets to be renamed as the source file name. This works well except the sheet renaming thing.
Sub Merge2MultiSheets() Dim wbDst As Workbook Dim wbSrc As Workbook
I have a sheet set up with names. I have 2 other sheets with spouses and children that belong to the first sheet. I want to insert a formula that will look up the correct spouse (based on a member number) and put in it the column. Same with the children. I tried the vlookup function, but it did not return the correct result.
I want to link two workbooks together with the aim that when a option is selected in a drop down menu in workbook "band form", it auto populates the rest of the form with data from the second workbook "showsales2013". date, ticket price, support acts etc etc.......
as a example,the drop down in workbook "band form" is a list of bands (list data also taken from showsales2013) ive got this bit working ok (i think ), each band is playing on a different day so i have used this formula to get the "date" from "showsales2013"
this seems to work until i insert a new row and/or column (in the showsales wookbook - which needs doing from time to time as new bands get booked to play), then i get #REF in the date cell on the "band form blank".
i used pretty much the same formula to pull the other needed data (price/support acts etc ) from showsale2013, and the result is the same, #REF.
I have looked through the forum and haven't been able to find an answer. I have two workbooks. One has a worksheet with two columns - the first column holds ID's, the second column has the names associated with them. My second workbook has a large table with many different fields and ID's only. I would like to use Vlookup to add the names to the second workbook.
I am trying to put all my parts with quantities on a seperate sheet called "Parts List" Every time you select a quanity for one of the parts, I want it to pop up on my parts list. This will make it easier to identify the exact parts I want and also the quantity I need. This will be much more convenient then scrolling down my parts list and trying to find the one's with quantities.
I think I need to use a vlookup or even a Macro but I don't know how to go about doing this.
My master file(master database.xlsx) is kept open from which i have to Vlookup the values into these 700 workbooks.
The "agent Id" column is common in both the master database.xlsx as well as those other workbooks also.
The thing i want to do is i need the data from the "reporting supervisor" which is in the master database.xlsx file to be available in the G column of the other 700 books ( i have attached only 4 sample books). The G column can be then named as "Reporting Supervisor". Since "Agent ID" is available in both files we can vlookup taking this as a base. I have attached the 4 sample files out of 700 as well as the master database file in a zip file.
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.