I am having data of codes in a and c column and the amount for the same code in b and d column. I want the sum of amount of codes in the two columns b and d, if the same code matches in the a and c column .
I am enclosing the excel file. Why a formula contains those things.
sumif.xlsx
This is what I am using:
=VLOOKUP($A5,TEAM!$B:$MZ,23,FALSE)
When I select the cell formula extension button thing and drag it to the right, the formula copies exactly into the next cell. If I select multiple cells starting from 19-23 and then drag, excel just repeats the formula over, (19, 20, 21, 22, 23, 19, 20, 21, 22, 23, 19, 20...) This is seriously frustrating as I have to click into the formula bar on each cell and change the value of the column lookup.
I can't keep going manually as I need to go to about 300 cells...
I use Excel 2007.
I have a data set that tracks ingredients in chemical products. For example sake the chemical product is a mixed color, and the calculated ingredient is a primary color.
I need to calculate the quantity of two primary colors based on their percentage of the mixture.
Column A contains the mixed color names. Columns B and C contain the percentage of the primary in each mix.
I began tracking this data in January 2009. Each month I add 3 columns to the worksheet. The 1st column contains the monthly mixed color quantity used. The 2nd and 3rd columns contain the calculation of the two primary colors.
I need the formula to calculate the 12 month rolling total for each primary color. (For July 2014 I need to calculate July 2013 through June 2014)
A
B
C
E
F
G
H
I
[Code]...
How to do this or if there's even a formula or even a macro i could run to run this data.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
I guess that might be considered a 1X3 matrix & and 8X3 matrix, but I'm not really sure how to set up the return values for these equations nor how to return them very quickly.
I would like to highlight the rows in my spreadsheet where columns G and H both contain the text "Yes". I've tried conditional formatting and VBA but can't seem to get either to work for what I need.
View 3 Replies View RelatedI have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;
=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))
I am trying to use the DCOUNT function to count based on two different criteria in adjacent columns is this applicable.
Situation:
I have column B that contains initials and I have column C that contains a type (of store) so it'd look like this
jp RET
jp RTO
jb RET
ma RTO
Rn CI
ma Fur
tc CI
ma RET
jp RET
and I want to have a count of how many RET's there are for Initials JP ect
I need to create a formula that looks at 2 adjacent cells. If both cells show 'YES' then I need the 3 cell to show 'YES'. If either/both of the 2 adjacent cells are blank then the third needs to be blank.
View 2 Replies View RelatedI need to copy two adjacent cells down every 7 rows in the same column.
Would do it manually but have some 4000 rows.
I have an array formula that takes in a bunch of dates and returns the next date that is not in the past:
{=MIN(IF($N$4:$N$28<TODAY(),999999,$N$4:$N$28))}
This works great, but I'm wondering if there is a way I can write it to work on cells that are not adjacent to each other. For example, can I have it operate on only cells N4, N7, N15, and N22? Is there an easy way to do this?
Based on a trigger point (being a month), and the number of times the expenditure is spread over (factor), can I formulaize the repetition of the figures?
Sheet1 *CDEFGHIJKLMN5***Trigger Points**Desired result via formulae
**6CostFactor*JunJulAugSept*JunJulAugSept7
£ * * * *10,000 2**1**** £ * * * *5,000 £ * * * *5,000 *8 £ * * * * *6,000 3*1**** £ * * * *2,000
£ * * * *2,000 £ * * * *2,000 *9 £ * * * * *8,000 1***1**** £ * * * *8,000 *
I am looking for a formula that searches a range of data and then returns the sum of the numeric values in the adjacent cells. I have a calendar style spreadsheet with 2 columns for each day. In the first column it has a list of names and the second column a number.
I would like a cell to return the sum of the numeric values next to each name. All the names are entered into the columns randomly and are unorganised. The same name will appear multiple times in the range and have different numbers next to it each time. I am currently using (for example) =COUNTIF(H6:AL14,"bob") to tally up the number of "bobs" but really what i want to do is find a formula that in plain english does:
Search a range of columns and where cell = "bob" take the value of the adjacent cell (to the right) and total them up!
i have attached an image - i hope it makes sense what i'm trying to do - i would like Q3 to total up the numbers to the right of all "bobs" across all the days - so it should return 42
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View Relatedi am trying to complete a spreadsheet which most of it is done but one column i have i have to average everyother square in each column which i did but when i total those columns at the end i get the dreaded #div/01 which means any value that i dont have in a particular column it will not add is there anyway to fix this. i am attaching a sample of the spreadsheet so you can see exactly what i am trying to do .
View 6 Replies View RelatedI import a text file that displays outstanding parts orders. The order Number column only displays one number even if there are multiple parts ordered I.E. so if three parts are on order then the order number is displayed once with the other two underneath blank. I would like to filter the column that displays the amount of stock that is available so that even if the row has no stock but the other two have all three rows are displayed that reference the order number.
Example Screen
Example.jpg
I have a spreadsheet where I need to count the # of times the value 1 is in a row, but the columns that I need to check is every other column.
View 3 Replies View RelatedPlease see the attached file. I would like to apply an auto-filter to the columns for "Food", "Animal" and "Value", but NOT to "Name", "Number" and "Description."
This would work fine if the columns I wanted to filter were all agacent to one another, but when i ctrl+click to select multiple ranges the auto-filter doesn't seem to want to apply. Any suggestions?
I am trying to use defined range names in a vlookup function. The target ranges contain non-adjacent columns. The formula wizard gives me an error msg "#value" and the vlookup returns #N/A.
View 2 Replies View RelatedI have got 5 columns. What i intend to do is to loop to the last data cell in column d,e and autofill it down from there till the last row in column a,b,c. What my code does now is to autofill the entire column c,d from the 1st cell and not from the last data entry cell.
Dim r As Range
Dim lRow As Long
lRow = WorksheetFunction.Max(Range("A65536").End(xlUp).Row, _
Range("B65536").End(xlUp).Row, Range("C65536").End(xlUp).Row)
Set r = Range("d1:e1")
r.AutoFill Range("D1:E" & lRow)
I had searched and tried dozens of variations but just can't get it right.
I need to print non-adjacent columns in my worksheet. (A:J, M). The cells need to be visible when one opens excel, this I cannot permanently hide them.
View 4 Replies View RelatedI am trying to find a formula that calculates the longest period from data in an adjacent cell.
The attached spreadsheet might better explain this
I need to know how to selec no-adjacent columns for the known_x's in the linest function:
Example:
'- A B C D E
1) 80 63 9 3 26
2) 80 63 9 3 21
3) 74 65 7 2 30
4) 74 65 7 2 20
5) 63 65 9 3 16
=LINEST(A1:A5,KNOW_X'S,TRUE,TRUE)
Is there any way to select for instance: column B and E as known_x's?
I heard about something where we can select total area and then choose which columns should be considered via "{column1, colum2}"..
That is all is missing for me to finish my project!!! Pls your help!!!
I want to total cells that have data in them across a row. I have a name in Column A and then in Columns C-Z I have data. In Column B I want Excel to scan across cells C-Z and if a cell has data in it (it will be text) I want it to add one to the total in cell B. Would CountIF do this with text involved?
View 7 Replies View RelatedI am looking for two formulas (col. B+C) in order to split every second value from Col. A into two adjacent columns. Empty cells, in col. A, should be ignored. The requested result is shown in green and red.
View 4 Replies View RelatedI am using this code to copy the cells from column C for the selected rows.
With Selection
.Columns("C").Copy
End With
How can I copy the corresponding cells in column "E" at the same time ? I think I need to use "Intersect" somehow ?
Pivot Tables. The structure and subject-content of cells B3:D14 (Block A) is identical to those of cells F3:H14 (Block B). I want a pivot table to treat the two Blocks as if they occupied the same three columns (e.g. B3:D26).
View 3 Replies View RelatedI have multiple columns in excel that contains values like this
A B C D E F G H
TrxVolTrxVolTrxVol Trx Count Vol Count
122001400013500
125031290012499
130001300012700
Now at the last columns G & H i want to get the result that how many column of title "Trx" are having values greater than or equal to 1 and how many columns of title "Vol" are having values greater than 2500 respectively.....
I am looking to place a formula which will look like this:
=min("A2:?2"), where ? depends on "number of columns". If number of columns is 4, then it should be D, E or Z. Number of columns is specified as an integer in range("B2").
I do not want to do it in a macro, want to do it in the formula.
I have done this before, but can't quite remember. I have tried:
=min(range(cells(1,2),cells(1,2+B2))), but does not work.