I created macro that copies cells from one worksheet to another using the copy/paste function. Unfortunately it runs rather slow. Instead of copy and paste I want to use something like this:
ActiveCell.Offset(0,1)= Sheets("Raw Data").ActiveCell.Offset(2, 3)
Can this be done and what is the proper syntax?
Can i convert this
ActiveCell. Offset(-1, 0).Copy
With ActiveCell
.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
.ClearOutline
End With
So that i can copy/paste the Offset range such as (-1,-2) (-1,1)?
Does this code copy all cells from the active cell up to the last non-blank cell, or is it up to the first blank cell after the last non-blank cell?
View 9 Replies View RelatedI want to use the following command but with more to it:
X=0
Y=0
Z=10
ActiveCell.Offset(rowOffset:=X, columnOffset:=Y).Activate
I want to use this type of command to highlight an area...not just move rows/columns. I want it to highlight from a point on the sheet marked by X and Y and then down Z rows.
So if I'm in cell A1 and want to highight from A1 down to A10, I'm not sure how to write that part of the code.
when the user enters the letter Y in a cell within a set column a macro kicks in and enters a VLOOKUP formula in a cell 1 row above and 4 columns to the left by using ActiveCell.Offset (-1,-4).
This seems to work fine however when I try and get the coding to copy and paste special as values it just seems to ignore it?
I have a combobox which is linked to a list of policies which has information to the right of them, upon changing the value in the combobox the subroutine below is activated.
It stores the value of the combobox in a string variable, goes to the list and searches for the cell containing the policy. Upon finding the cell it uses the range offset operation to select the two boxes to the right of the active cell. This is where I get my error 1004 - application or object defined error.
Code
Private Sub cmbSectionName_Change()
Dim mySearch As String
'Assigns combobox contents to mysearch
mySearch = cmbSectionName.Value
'select the range
Application.Goto Reference:="SectionNameList"
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks
and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet
' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant
Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside
excelfile = Dir(Mypath & "*.xls")
Application.DisplayAlerts = False
Do While excelfile <> "" ' loop all files
I am trying to copy the active cell from a range on sheet 1 to a new sheet ( Sheet 2 )in the next available row of Column B ONLY if the value changes from being blank.
If it was not empty I dont want it to be copied.
I cant seem to get my onChange event to copy anything.
trying to make a copy range of cells from an activecell.
My activecell is P9 and I want to copy the contents of P1 to P18 without losing P9 as the activecell.
with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedI am attempting to change what cells this macro places into the report from each sheet and am having no luck. It now captures the “ Date”, Worksheet name”, “Address”, “Pwo”, “Part”, “Time” and “Comments” . I would like to replace the time field (the one after the “Part” and change it to “Quality Technician” so that each entry it finds with comments it will also list who’s comments they are instead of the time.
I have not been able to fix the missing headers or changing what it captures.
Private Sub CommandButton1_Click()
Dim wks As Worksheet
..........
Dim FirstCol As Long
Dim LastCol As Long
Dim iCol As Long
myDate = Application.InputBox(prompt:="enter date:", Type:=1)
If IsDate(myDate) Then
'keep going
Else
MsgBox "Please try again!"
Exit Sub
End If .........................
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm trying to copy a range, specified by an offset, then PasteSpecial that range to yet another location specified by an offset.
This is the code I have so far, which does not attempt to find the range to copy via an offset.
Following Dave's rule regarding using the rows in Excel rather than the columns I am trying to re organise some workbooks that have been passed to me. To copy one column of information requires 4 pages of code the first section of which is below.
Sub Copy1()
Sheets("INPUT_SHEET2").Select
Range("F4").Select
Selection.Copy
Sheets("INPUT1").Select
Range("C6").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End Sub
Now that I have the code to copy one column I want to be able to adapt it to move four columns to the right from F to J and using the example above copy from J4 to C166. I am guessing that Offset is the way to do this but can't seem to work out how. ach block of data takes up 160 rows and the data is all pasted into column C. The data to be pasted starts in row F then J then N and so on up to column IZ in some of the workbooks I am trying to revamp.
Copying the target cell to target.offset(0,-3)
View 5 Replies View RelatedI am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........
I need to create a macro wheather it be for each row or perhaps a dynamic macro that based on the active cell it can then offset based on my Expense type(Column B) into the respective row.
i had placed a sample of what i need to come up with highlighted in red. I need to copy the data in C7, C8, C9, etc... into D7:N7, D8:N8, etc... I have over 950 rows this code will need to be copied to. Columns do not move.
So if choose "fixed then i need for the macro to copy and paste data in each of those cells for Febuary to December. Should i choose "variable" then it places a "0" for Febuary to December and should I choose "NA" then nothing happens and i dont need code for that. It needs to be running constantly that way i dont need to run the macro so it needs to be in a module i beleive.
My problem is that i have three years of data and i have over 950 rows for expenses. THis is just a morsol. I cant place code in the cells as the expenses go there and it will just over write the code and is useless to me. That is why i need a macro that based on what i choose it then copies January's expense appropriately and for now it doesnt need to be dynamic but i prefer that it be based on the active cell if this is possible as i used over 950 option buttons and it worked but as the file gets bigger it crashes my computer.. 'Not enough Resources" .. gigs of ram and a 3.6 processor..
This is the current code I am using, it works but from another post it looks like it could be cleaned up.
With Sheets("Web Data")
.Activate
Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Sheets("MW Forecast Calculation").Select
Range("C9").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
This is the code I am trying to get to work but I am having trouble with the red text.
Set CopyRange = Sheets("Web Data") Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Set PasteRange = Sheets("MW Forecast Calculation")
Cells ("C9:Z10")
CopyRange.Copy PasteRange.Values
My source data generates a sheet full of individual dates and condo rates. We'll call it the "Rates Tab". The dates are not sorted or organized into a single column and to complicate it further the data has blank rows periodically. The only recognizable pattern is: (example) the date is in cell b12, then the condo rate will be 2 columns to the right in d12. On a separate sheet, the user will input a check in date(date A) and check out date(date b). I need to find the rates for all dates from Date A to Date B located on the Rates Tab. how to find a Date across various columns and then return a value 2 columns to the right from the "target"?
View 6 Replies View RelatedAs seen in the attached spreadsheet on sheet1 the template is 6 columns and 5 rows. The colors correspond to the information needed on sheet 2. this template includes data from row 3 on sheet 2. I need a macro that will copy this template and return the next row of data from sheet2. this has me stumped. Also the data changes on sheet, so it may have many rows or just a couple.
View 7 Replies View RelatedI would appreciate some ones help to correct a macro I'm trying to write. The macro copies 3 columns from Sheet1 to Sheet2 in a selected location. The 3rd column copied needs to be pasted in a different column in Sheet2.
View 6 Replies View RelatedI am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
View 2 Replies View RelatedI am trying to achieve something like this :
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data()
'
' Payroll_data_MON Macro
Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range
Set a = Range("A4")
Set b = Range("I4")
Set c = Range("G4")
Set d = Range("H4")
[code]....
I have a spreadsheet with 2 worksheets. I have a variable cell and a display cell on Worksheet A and two other cells with information on Worksheet B that I need copied over to Worksheet A based on what is entered for the variable on Worksheet A.
I want to be able to enter a variable in Worksheet A, cell B25. I then want the code to look up the variable I just entered at B25 on Worksheet B, column A. Once the code finds the variable, then I want the code to copy what is in column B and enter it into Worksheet A cell C25.
In other terms, I want to enter "Bob" in Worsheet A, B25. On Worksheet B, I have 50 different names of people in column A and additional info directly to the right of their names in column B. When I enter "Bob", I want the code to find "Bob" on the Worksheet B and enter "is worthless" on Worksheet A, cell C25.
I have tried and got the code to work with several If/then statements and I accomplished the same using a select case arguement as well using something along the lines of "if B25="Bob" then C25=worksheet B("B2")" assuming Bob is in cell A2. My concern is the info on Worksheet B is fluid. I need to be able to sort and add additional lines at any given time. My data set is going to be between 500 and 800 rows. Any time I add a row and re-sort the data set, I want the code to find "Bob" in column A and then display what is in column B in Worksheet A, C25. I can continue to use the if/then statements, but they are static and if I add a new row near the top, I would have to re-number all the if/then statments in the code.
I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....
Sub TestSearch()
Dim FoundCell As Range
Dim SearchString As Variant
'Specify Value to Search
SearchString = " Excel"
'Perform the Search and Return a Cell Value
Set FoundCell = Worksheets("Source").Range("A1:A10000").Find(" Excel", lookat:=xlPart)
If Not FoundCell Is Nothing Then
MsgBox "Found at " & FoundCell.Address
End If
End Sub
I'd like to take the code above, which returns a cell address which contains the text " Excel" and modify or add to it the capability to copy a range starting from the address returned and ending 102 cells further down in Column A on the Source sheet to A1 of the Sheet1 sheet. The crux of the problem seems to be converting the address to a row number then adding the value of the number of cells in the range to find the end row number then converting that back to an address??