I have written this formula below. I do not know the correct part of this formula that will add the numbers I have in Column AB2:AB552 (bold below). As it is, this formula is counting the number of cells in that range that has numbers in it, but I need it to total those numbers as my final result.
=COUNTIFS(Cases!B2:B552,"1",Cases!G2:G552,"c*",Cases!X2:X552,"No",Cases!AB2:AB552,">0")
I'm trying to find total gross commission within a spreadsheet, where gross commission found in Deals column Q. Columns T & U indicate with an "X" whether the deal was associated with referrals and such.
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$T$2:$T$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$U$2:$U$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
But now I need to sumif Q2:Q500 excluding rows where "X appears in either T or U, or both, to indicated complete self-generated deals.
This is the function I have now: =COUNTIFS(Sheet1!A:A,Sheet2!A2,(Sheet1!E:E),"*") and it works great, counting every cell with a value in column E.
When I make criteria range 3 another column (criteria also being"*") my numbers actually start going down. I think it might be averaging the two columns out or something but I just want it to count all the cells with values in it from multiple columns and give me a total count.
I have 4 columns total that I want to be able to get a total count from.
I have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
Have table with five columns and five rows. The columns(C4:H4) hold Systems, Systems is a defined range, and rows (B5:B9) hold staffer names, Staffer is a defined range. Cell A5 holds period, by quarters, ie, Q1-Q4.
At present am using =COUNTIFS(Staffer,$B$5,System,C4,Q,$A$5). This works fine but as you can see I must change the Staffer starting reference $B$5, with each new row.
formula that changes column and row automatically as I drag down and across.
I'm trying to use countifs on a filtered table to find the sum for a column based on 2 criteria.
I've used =SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet3!K7,ROW(Sheet3!K7:Sheet3!K7:K20000)-ROW(Sheet3!K7),0)),--(Sheet3!K7:Sheet3!K20000="Yes"))
for a single criteria which is great, but I also need it to look at column B.
In a non-filtered table it works as:
=COUNTIFS('Sheet3 '!$K:$K,"Yes",'Sheet3 '!$B:$B,B5)
Is there any way to do this?
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
I am using the formula to count if c- is in the cells: =COUNTIF($B2:$U2,"C-")
However, I need to change the formula so rather than just count if C- is in the cells, I need it to count if A*, A+,A, A-, or B+ are in the cell instead.
When I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies View RelatedI'm currently working with the formula
=COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000")
However I need the formula to count only one for the n possible duplicates in the Data[Name] column.
Say I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
I am looking for a replacement to the function COUNTIFS that will work with Excel 97-03. I have attached a sample of the document which will hopefully demonstrate what I am trying to achieve. On the sheet labelled 'Data' there is four headings (MerRefs, JCPRefs, Self Refs and Other) for the results beneath these headings I have used the Countifs function. I have attempted to use the SUMIF as an array formula but couldn't get this to work.
Also in the hope of killing two birds with one stone, I created this in Excel 2007 and in the past when I have saved documents as 97-03 documents it used to warn me of any incompatible functions included within the doc and now it doesent. Where can I switch that setting on?
I'm trying to do a COUNTIFS for a set of data. What I want it to do is pull everything that is assigned to a certain person that has no date in one column, and information in another. For example:
Name
Date
Comment
Michelle
4/30/14
Closed
Michelle
Issue
Michelle
4/30/14
Closed
Michelle
4/30/14
Closed
Michelle
Issue
So based on this dataset, I would get the number 2 for Michelle (row 2 and 5 have no date in column B and a comment in column C). I've tried a few variations and can't seem to make it work right.
I am using the COUNTIFS function. I can us it with simple criterias but unsure to go about this criteria.
I would only like to count the cells if the range in question is equal or greater than S3 but is equal or less than T3.
I don't know how to use the => signs.
I have a list of information regarding jobs that need to be carried out by a number of companies by a number of dates. What I want to count is the number of jobs that company A need to caary out by a specific date and then the number that company B need to carry out by the same date. The formula basically needs to say countif column a equals company A and column C equals 11/11/09. I have tried numerous combinations of IF, Countif, SUMif, And etc but can't get the formula to work,
View 9 Replies View RelatedI'm looking to count the following:
A B
a 1
a 1
b 0
b 1
c 0
a 1
If column A=a AND column B=1, add column B on the same axis. I can only get a function that adds all B column if A=a. The function should equal 3. Cells B1, B2 and B6 should be the only ones counted.
I have the following formula: =IF((COUNTIFS(data_sheet!U:U,Monthly_Report!H10))>166,0,COUNTIFS(data_sheet!U:U,Monthly_Report!H10,data_sheet!BN:BN,"Premier"))
This formula counts values on my data sheet based on the specified criteria. I have this broken ito 3 section, each section that needs to be summed.
Section 1 can not be greater than 165, if it is all the values in the range needs to be reset to 0
Section 2 can not be greater than 190, but at the same time can not be less than 166, else is need to be reset to 0. How would I adjust the above mentioned formula to check these criteria?
I'm currently using the following function: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000") which works perfectly. However I'd like to add another condition "between 1000 and 2000".
I've tried this but I'm not getting any luck: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],AND("<1000",">2000")).
=COUNTIFS('Gone Out'!L:L,"=27/05/2014",'Gone Out'!A:A,"=John Smith")
Where I have the date why will this not work?
=COUNTIFS('Gone Out'!M:M,"=E12",'Gone Out'!B:B,"=John Smith")
I have 27/05/2014 that in E12 but it keeps giving 0 instead of the actual number
Also, How would I make it so that instead of adding 1 to the value, i could add John Smith's Age?
So I have a formula which contains a countifs that looks like this:
=COUNTIFS($AZ:$AZ,$AZ15,$AM:$AM,ABS($AM15),$AD:$AD,$AD15)
However, I want the formula to count values when ABS($AM:$AM)=ABS($AM15) but I get an error if I try to put ABS($AM:$AM) as my range. Is there anyway to set my range as the absolute value of Column?
I have also tried ABS($AM15:$AM1000).
I am writing a formula to accomplish the goal of counting only unique text values in a column, based upon two different factors:
*Need to Count unique text values in column named 'CASE_NAME'
*Column 'FISCAL' must match cell A5
*Column 'ZONE' must match cell A3
I have a COUNTIFS function that, among other criteria, only counts cells in which the value is "P". I now want to modify this function to count cells in which the value is "LA" in addition to cells in which the value is "P". I'm not sure how to work this into the argument. I tried using OR("P","LA"), but that's not working.
View 3 Replies View RelatedI am having a problem getting my formula to return a result. The basics are that I would like a count of a specific set of data in a section of a workbook. So in column 'A' I am searching for 'TextA' but this also has to have 'TextB' in column C. The problem is I have 12 consecutive monthly worksheets I would like to pull this data from and I only really want to write one formula. I can (and started to) use the countifs function plus countifs function etc referencing each worksheet individually but this seems long winded.
I have read on this forum that I can use sumproduct combined with countifs but I can't seem to get it right. I have listed my formula for a single sheet countifs function below, but I don't know how or if to include the sumproduct function to reference the rest of the monthly worksheets. The other thing I should mention is that there are other worksheets too, so it would need to be specific to this range, but they are consecutive within the workbook.
How to combine many criteria in a COUNTIFS formula with the same range.
I made a formula:
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1")
And it works fine, but I need four more conditions -
brut!$C$C; "2", brut!$C$C; "3", brut!$C$C; "4" and brut!$C$C; "5".
When I change the formula to
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1"; brut!$C$C; "2"; brut!$C$C; "3"; brut!$C$C; "4"; brut!$C$C; "5")
It didn't work anymore.
I don't know how to use IF and COUNTIFS together.
I have a column of data that contains a two letter identifier, which can sometimes be combined with another 2 letter indentifier: Example
Column D
AA
DC
DC,AA
How would I get countifs to count each occurrence of AA or DC by itself?
I need to look at a series of data once per week and calculate the results. I'm trying to use COUNTIFS to get a result based on both the date I'm doing the analysis for and for the response.
I've attached a sheet that shows a sample of what I'm trying to do. Cell B1 contains the date range I'm using, and cell B18 shows the formula I'm having trouble with. I suspect it's because I'm trying to treat a date like text, but I'm not sure.
I am using COUNTIFS to work a formula for finding an average of a SUMPRODUCT. Formula:
View 2 Replies View RelatedI have the following excel formula:
=LOWER(IF(($H2&":"&$M2&":"&$N2&":"&TEXT(COUNTIFS($H2:$H$2,$H2,$M2:$M$2,$M2,$N2:$N$2,$N2),"0000"))=": ::0000","",$H2&":"&$M2&":"&$N2&":"&TEXT(COUNTIFS($H2:$H$2,$H2,$M2:$M$2,$M2,$N2:$N$2,$N2),"0000")))
I need to convert the COUNTIFS into something that is Excel 2003 friendly.