I have a 20 number of CheckBoxes in a userform. But only the first checkbox has a special function if it is selected alone. So I want to set a condition if only it is selected. How may I express this?
Something like:
Code:
If only the Me.Checkbox1.Value = True Then
'Do this
Else
'Do that
End If
Can it be made in VBA as follows:
I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.
When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.
I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines
I am trying to do is develop a electronic visitors log in excel that has three statements visitors must read and accept before they can enter. I have a userform with date/time, name etc, then the three buttons that open another user form with the statements for them to read and 2 command buttons (Accept and Decline), Accept takes them back to the log-in userform and Decline closes all forms.
The problem I am having is I can’t get the checkbox on the log-in form next to each statement to go true when the accept button is clicked for said statement. I would like to disable the checkbox on the visitorsignin form so the only way it goes true is from the statement form.
I hope I explained myself well enough for someone to understand what I’m trying to do, the code is not finished yet either, still waiting for signature pad to come in so I can paly with it and figure out how to incorporate it into the file.
On my excel 2007 UserForm I have a CheckBox with 18 possible or multiple selections of reports (word.docm)
what I would like to do is, when selected they would be sent to printer.
Here's what code I have so far, something is missing, I'm not sure
Private Sub CommandButton2_Click()
For x = 1 To 18
If Controls("checkbox" & x) Then
Select Case x
Case x = 1
worddoc = ActiveWorkbook.Path & "Inspection ReportsCover Page.docx"
Case x = 2
worddoc = ActiveWorkbook.Path & "Inspection ReportsClient Information.docx"
Case x = 3.....................
i am having is i have created a userform that automatically opens when i open the workbook, I have placed checkboxes on the userform and i need them to remain checked even after the workbook is saved and closed, but whenever i reopen the workbook the checkbox are unchecked again
View 2 Replies View RelatedI have userform which shows days in month & populated Listbox for cell values. I want checkboxes to be ticked and Textbox to count when conditions are met, for each day. Range is, example (for 1st day) from E3:E318. My code so far is :
[Code] .....
So, When "MIN1" reaches value of 2, checkbox is ticked - If more than 2 then Msgbox ; When "MIN5", I want to be counted in Texbox ;
I have a userform with lots of checkboxes and I would like to be able to create either a GIF file of the userform using VBA (if it's easy), or export to a .txt file all the checkbox labels and their respective values (i.e. TRUE or FALSE) which I think might be more easier to code.
View 9 Replies View RelatedThe code listed below checks to see if any checkboxes are checked via a form and if they are then populate a string variable with text to build out a range to be used for a Defined Name Range in excel. The code works but I was wondering if the same functionality could be written better.
Private Sub cmbRun_Click()
Dim SelectedRange As String
If CheckBoxML.Value = True Then
SelectedRange = "Revenue!$M:$M"
Goto jump1
Else
If CheckBoxML.Value = False Then
Goto jump1
jump1:
If CheckBoxSL.Value = True Then
SelectedRange = SelectedRange & ",Revenue!$N:$N"
Goto jump2
Else...............................
OK I feel really stupid on this. I must be overlooking something very obvious.
If you look at the attached userform there are some checkboxes where the "check" has a bold appearance, and others where the check is not bold.
If you examine the properties of the checkboxes in VBE, they appear to be identical.
I currently have a user form and am trying to make a counter to that will increment if the check box is not selected, but will not increment if the check box is selected.
I am assuming I could use an if then statement for this, under the command_click OK. but I cant get it to work.
I'm trying to get a checkbox in a user form to prepopulate depending on what's in cell H5.
Here is the line of code that I need rewriting (in bold):
Sub Userform_Initialize()
LabelPolicyNumber.Caption = ActiveSheet.Range("B5").Text
LabelSponsorName.Caption = ActiveSheet.Range("D5").Text
If Application.WorksheetFunction.IsNA(ActiveSheet.Range("H5")) = True Or ActiveSheet.Range("H5") = "" Then CheckBoxHalifax.Value = False Else CheckBoxHalifax.Value = True
End Sub
H5 contains a vlookup formula, so depending on other variables it can either have a value ("Halifax"), an error (#NA) or be blank. I've
It seems Excel will only evaluate the first statement and ignore the Or statement, meaning when H5 is blank Halifax is checked off when I load the user form.
I'm working in Excel 2007 on Windows XP.
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit
Private Sub UserForm_Initialize()
'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables
Dim lbl As MSForms.Label
Dim i As Integer
Dim x As Integer
Dim newcheckbox As MSForms.CheckBox
'selects the summary page
Sheet1.Select
For i = 7 To 65
If Cells(i, 3) "" Then..................
I am having a little bit of difficulty find ways to effectively incorporate a checkbox panel into a form interface. What I am trying to do is all the user to select using checkboxes which of 31 separate columns will automatically be deleted or not deleted. The method I have been using is to create 31 checkboxes, and then use the value of the checkbox (true/false) to determine a value in an array, which then can be used to delete the column by a separate sub.
However, I am interested in being able to have the checkboxes start checked or start unchecked by values contained in a different array. My problem is that I am unable to reference the checkbox itself until the form containing the checkbox is opened, but at that point I don't know of a way to cause the desired checkboxes to automatically be selected without placing a command button that must be pressed to fill them in. Essentially I want to be able to open a userform that has checkboxes preselected.
I have a userform with 17 checkboxes that their captions should correspond with column A range ("A2:A18) on a worksheet.
Is there a way in userform_initialize, or activate, to create the captions from that range?
I could type the code 17 times like;
Code:
me.checkbox1.caption = wb.worksheets("area").range("a2").value
I was curious to know if it could be looped? Textboxes on the same userform.
I have a multipage wizard like userform that for each page has check box selection choices a user can pick from. The sample I've attached uses animal attributes for 2 animals. What I'd like to have is code that populates the worksheet with the animal under consideration (determined by the Frame Caption) in say A5, then populates the attribute selections made starting in B5 with no blank rows in between if they chose not to mark a checkbox.
So for animal one on page 1 of the multipage form, if the user selected attributes 1, 3, 4, and 6 and clicked the "NEXT" button on that page, animal one appears in A5 and then those attribute selections would be in B5, B6, B7, and B8. If the user then selected for animal 2 on page 2 of the multipage form, attributes 2 and 6 and clicked the "NEXT" button on that page, then animal two would appear in A9 with the selections appearing in B9 and B10.
I should mention that the number of rows in Table 1 may grow (or shrink) row size with additional rows added (or deleted) by the user. Not sure if it matters.
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for:
- Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for:
- Carey
- Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _
If CAREY.Value =true then "- Carey" End if & vbnewline & _
If KEITH.Value =true then "- KEITH" End if & vbnewline & _
If JULIET.Value =true then "- Juliet" End if & ")
married, widows, single checkbox is selected
macro solution
good work.
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedI have a worksheet with a large amount of data in it. Every couple of months the data will change and I place this in a different sheet (sheet 2, this comes from a software tool) . Is there's some code that can run a check on sheet 1 compare all values against sheet 2 and highlight the rows that have a different value between sheet 1 and sheet 2? Perhaps paste the rows into sheet 3 with the different value highlighted??
Example of original and changed data attached : example_2.xlsx
(I cannot attach the files as it is all personal information) Basically its list that looks like this:
2014-02-11 John Doe
2014-02-12 John Doe
2014-02-17 John Doe
2014-02-10 Mary Jane
2014-02-11 Mary Jane
2014-02-16 Mary Jane
2014-02-10 Frank Simms
2014-02-11 Frank Simms
2014-02-18 Frank Simms
2014-02-11 Tony Sly
2014-02-12 Tony Sly
2014-02-17 Tony Sly
Im trying to identify anyone who does not have an entry on 2014-02-17. I've played around with combing IF and VLOOKUP and Conditional formatting but I couldn't seem to get it to work. If it were to find a date, no problem, but to find someone without that date I'm having issues. If there was a way to highlight or identify Mary Jane and Frank Simms since they don't have an entry on 2014-02-17, that would be great.
I have two worksheets one worksheet contains Insurnace names and Addresses from a hospital. I need to match these up to specific Insurance codes from a billing company worksheet. The bad thing is my billing database has multiple duplicate addresses for different insurances (Yes this does happen where different Insurances have the same address-don't ask me why). So originally I did a VLOOKUP where I looked up the address from the hospital Spreadsheet and matched it to the Insurance Specific code. The pitfall to doing it this way is that it only grabs the first exact match from the Billing worksheet. Is there a way to either automatically identify the possible matches and allow me to choose which one is the exact match or how do I just identify duplicates on my billing worksheet and match them manually? I attached the worksheet.
View 9 Replies View RelatedI want a function that identify the row number, where the date in column A is the same of the active row, but the value in Column B is equal to a different text e.g.=”zz”?
View 14 Replies View RelatedI'm trying to identify the last used row in Column A of my DestinationSheet so that I can add data to the row below it, but I'm receiving the following error: Run-time error '91': Object variable or With block variable not set And it's directing me to this line of
View 4 Replies View RelatedI need help with creating a simple formula.
What I have:
..A B C D E
1 3 4 6 5
2 6 2 3 8
I want to identify that A1, B1, C1, D1 are > B2. My formula will be placed in E1 so then I want a value of 1 to show up in cell E1 indicating the identification was successful. I can't figure out how to make this happen. My formulas so far in E1: =sum(A1>B2)&(B1>B2)&(C1>B2)&(D1>B2) This formula comes up with 0FALSEFALSE instead of the value of 1 I am desiring.
What I want:
..A B C D E
1 3 4 6 5 1
2 6 2 3 8
I am using ADO connections in my program to insert the datas in the excel. I want to find if the excel is locked by another user. How do i do this in ADO commands.
View 6 Replies View RelatedI have written a UDF to do some calculations i a workbook. I would like to run a sub, checking the cells in the spreadsheet to see if my formula is present. and if so, then add or change an argument in the formula. My problem is:
How do I write the code so that it will recognize my formula ? Is it possible to attach a tag to a formula which Excel can search for ? I cannot search for the formula including arguments from specific cells, relativ to the formula cell, as the user is free to input the arguments with reference from anywhere in the workbook.
I am looking for a way to search using macros. Currently i can search/find by cell, but i need to find with mulitple cells. An example is, sheet 1 "A2" and "B3" date needs to be compared to sheet 2 to see if the data is already in sheet 2. Column A is first name and Column B is last name. Need to know if that full name (first and last) is already in second sheet. I can already search for just the first name or just the last name but now the two together.
View 5 Replies View Related