Im wondering if this can be done in excel..
2 columns
if the value in column O=$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%
this is the way I was trying to do this...
=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)
I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?
I am trying to loop through Column Q2:Q2000, and divide the adjacent Row R2:HS2 by the value in the corresponding Q column.
ie. cells R2: HS2 should all be divided by Q2
cells R3:HS3 should all be divided by Q3
etc until R2000:HS2000 are divided by Q2000
I presume that i would require an initial loop to scroll through the column and a seperate loop to scroll through the row values, but i cannot get my head around how this is done.
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana
B1 - 3
B2 - 2
B3 - 1
B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedHave 2 columns of data
Need to read the cell value of column A that corresponds to the MAX in column B. Trying to use OFFSET to read the col to the left but will not work.
Example of table and expected result
A B
1 1
2 1
3 2
4 6
5 3 Result = 4
I'd like a macro that cycles down 50000 rows of column B. If it comes across a blank cell it will import the value from its adjacent cell in column A. then the macro will move onto the next cell.
View 9 Replies View RelatedI need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
Example:
Order#1; Model1; Serial1, Serial2, Serial3
Needs to become:
Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3
I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:
1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.
2. Set Cell "A2"'s value = 1 --> I have already coded this portion.
3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.
4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.
5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............
I may not even be calling it the right thing. but let me explain what i'm looking to do. i've got three columns on a spreadsheet and i need to be able to add two columns together and then divide the sum by another column. so something like this:
4+4/636 = 79.5
d2+f2 (divided by) h2 = 79.5
I'm trying to divide the value in column A by the data in B:AO using VBA, however I need to repeat this for many rows (the values differ for each row).
There could also be a different amount of rows with data in each time, and there is also a single blank row after every 18 rows with data.
In A1 I have the value 60 I want it in 1:00:00 format
What I do is, I divide that by A1/24*60 and the copy that and paste-special-value on A1
Is there any way to convert the number 60 into 1:00:00 format without having to do calculation in temporary columns?
I have two columns,
Name
Marks
Amit
45
Ankit
54
Aditya
Arun
Ayush
43
Amar
Akas
32
Akshay
21
I want to extract first data from column Name where in the data corresponding to it in Column Marks is blank, and if that is filled, i want the next data to be shown automatically
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
View 3 Replies View RelatedI had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.
View 9 Replies View RelatedI have are two worksheets, "Sheet 1" which is a bill of lading form and "Sheet 2," in which columns A and B contain Part Numbers and Weights respectively.
What I'm wanting to have happen is when a user inputs a part number into Sheet 1 (say in cell B6), it calls a UDF that looks up the part number on sheet two column A and returns the corresponding weight from column B (to say cell C6 on sheet 1).
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
This should be simple but this is not working like I want it too. It should change the value in the cell adjacent to the cell in column B if the value of the cell in column B = "X".
Dim Well As Range
For Each Well In Range("B:B")
If Well.Value = "A2" Then Cells(Well, Well - 1).Value = "SamplePlate2"
Next Well
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
In the B column i have dates. In the C column i have total hours.
Right now the following code counts how many instances of a date (Dt) are found and makes a decision if it is more than 3.
VB:
IVAL = Application.WorksheetFunction.CountIf(WS.Range("B:B"), Dt)
If IVAL > 3 Then
What i need is to SUM the hours (C column) for each instance of the date (Dt) in the B column, and test if it is greater than 24. so it would be similar to this:
VB:
IVAL = Application.WorksheetFunction.SumIf(WS.Range("C:C"), Dt)
If IVAL > 24 Then
Except that this code attempts to sum the hours of the C column and also wants to recognize the dates from the C column which would not work. I need something different than SUMIF. I need it to Sum the C column for the appropriate dates (Dt) in the B column.
I have a spreadsheet with a list of account numbers and values(sheet1) and on a seperate sheet (sheet2) a list of all unique account numbers that appear in the transaction data sheet.
What I am trying to do is get a total sum for the values of each account number. What I am getting well I'm not quite sure what I'm getting. The problem appears to be when the xSubtotal variable is reset to 0 at the end of calculating all the values for the account number.
The first two columns are an example of my data set; I would like a formula for the 3rd column (Length+1) which will give me the length at the next age (i.e the value in the cell below in most cases) unless the following age is 1 in which case I want it to return zero.
Age Length Length+1
1 22 51
2 51 78
3 78 94
4 94 0
1 31 46
2 46 69
3 69 85
4 85 96
5 96 103
6 103 0
1 19 36
2 36 52
3 52 0
