I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code: Sub ClearAndReset() Dim WS1 As Worksheet Set WS1 = ActiveWorkbook.Worksheets("Stocks") WS1.Unprotect Application.EnableEvents = False With WS1
I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
I recorded the following macro to select all the worksheets in the Activeworkbook by clicking on the first worksheet and then hitting Shift Tab and selecting the final worksheet (thus '[Group] selecting' all worksheets in the active workbook).
End Sub How do you generalise the Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select if the number and names of worksheets varies from workbook to workbook?
Issue with array that's bolded The way it is set up is to rename the 3rd sheet to MyFileName and rename the last sheet to MyFileNameTwo. The file names will remain constant. They will always be the 3rd and last sheets, but the number in between will vary. Is there anyway to select the 3rd sheet through the last sheet to delete these? When I use the array it wants sheet names but those are based on multiple variables in other workbooks.
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I need to create a line of VBA code to have the macro select several rows to be cut and moved. The problem is, at this stage of the macro,the number of rows vary. Could be 1, could be twenty. I have established DD as the Dim for the number of rows, but I am not sure how to write the command so that 1 through DD are selected, cut, and moved. I may be having a senior moment, but I can't think of how to couch the term.
I have row of dates and underneath those dates I have a row of numbers. The numbers count down. For example:
[Code] .....
At the end of the row I want a cell to return the date that the row first started going negative at. In this example, it should display 10/31/2014 (for when it went to -60).
I have a description for a couple trucks in my inventory, rather than retyping all the mileage, I would like to select the miles out of the description.
Example: 14.0 Detroit 515 HP, 10 Spd OD, Engine Brake, Air Ride Suspension, 3.42 Ratio, 234" WB, 70" Double Deck Condo, 22.5LP Tires, Aluminum/Steel Wheels, Tandem Axle, 12,000# FA, 40,000# RA, 259,000 Miles
I have tried the find, left and mid formulas but haven't put something together to work just right. I would like to select the 7 characters to the left of "Miles".
I'm an entry level Excel user who is looking for a spread sheet to print multiple pages for tagging pallets in a warehouse. The pallets will contain the address of the customer and the number the pallet is.
Example 30 pallets would be 1 of 30 then print 2 0f 30 then print 3 of 30 then print
how I can put in a varible pallet total and have it print the all sheets up to the given number?
2)if i click on a macro the output in the above cells should be as follows"
"Login to database"
3)if i run the same macro for the 2nd time the output should be:
"Are you done with the reporting?"
4)if i run for 3rd time the output should be:
"Logoff from database"
5)Say example if i run the same macro for 1o times i should get 10 different outputs....if i run for the 11th time the output should get repeat from 1st....
6)Output need not be in order....random also fine...
If possible gimme 2 different codes:
1)Output should be in the order wise from 1-10 and get started from1 again
I am going to convert different costs during life time of a product to Net Present Worth (NPW), consisting Maintenance and Rehabilitation costs (M&Rj) and Salvage Value (SV), according to the following formula: [URL] .......
SV occurs only once at the end of life time, it's NPW in Excel can be calculated as following:
=PV(i discount, AP,0, SV,1)
But M&Rj costs occurs J time during life cycle, and formulating manually their mathematical formula most times takes much time. Exactly what should I write in the cell to get their total NPW? In other words, how can I get the following formula by Excel functions: [URL] .......
Reminder: NPW= FV( 1/(1+i Discount))^n FV: future value i Discount: discount rate n: numbers of years (periods)
I have a repetitive task that needs to loop effectively. The only things that change each time are the start Columns ("C:C") next moves to ("D:D"), this then continues down the different columns, until it reaches the end of the columns.
The other thing that changes is the formula initially it starts at RC[-1]&"",""&RC[1]. Next time the numbers will be plus one, so RC[-2]&"",""&RC[2].
The last thing that moves is the "B1:B" & LR on the next step will move to "C1:C" & LR.
Basically a loop with variables in the loop. Is this possible? Below is the code I have begun to write but I could be writing this for ever, over and over again.
For example: From To .................. P1.........P4 P2.........P4 P1.........P5 P1.........P4 P3.........P5 P2.........P4 P2.........P4 P2.........P3
There are hundreds of sheets like this with more complex panel numbers (there are 70 to 80 panels). I want to count the number of times each panel is linked with another panel i.e the number of times its name is mentioned in front of it. This may look like as follows.
How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example: 1. apple 2. apple 3. apple 4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
how can I modify the formula below so that after every row (i+60) the letter D changes to E then F, then G..... and so on. I want the following with the formula below:
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
BLANK CELL NAME ADDRESS CITY, STATE ZIP BLANK CELL
I would like to be able to resort the dats so that each line becomes a column BLANK CELL NAME ADDRESS CITY, STATE ZIP BLANK CELL
I know I can do it 3 cells/rows at a time using the paste special and transpose command but I have a 1000 names and addresses. How do I do it in one operation instead of a thousand?
I have a few columns referencing Crash numbers. The majority of each column is a null value, with about 10-20% of it actually containing the number of a Crash. I want to run one MODE each on a column to see what the most common Crash is.
The following =MODE(Table_X[Crash Alpha])
Results in a #N/A Value Not Available error. What do I need to change to make it work on the column with some nulls and some numbers (no strings)?
As a secondary question, if I wanted to apply a date filter (the columns are part of a table, including a Date column) like the below:
I've got the following table (see attachment). In a column A there're the articles and some of them appear several times. In column B there's the quantity. The goal is to get in column C the sum of quantities in column B for the repetitive articles in column A and then delete the repetitive articles.
so the table should look like: 3RD125070442H 30 3RE071870493H 4 3RI100009624T 15
in excel 2007 I found only the function to remove the duplicate cells but I need to get the sums before removing them and have no clue how to that.
I'm not sure what I'm trying to do is even possible, but figured this is the place to ask the question. I'm trying to compare a list of companies (column a) to a list of employee email addresses (column b) and post results (column c) that display all associated email addresses that are unique to company name. Since multiple employee email addresses can be associated with numerous company names.
I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
I am getting ready to create a spreadsheet to list vendor's names and emails along with other data. I would like to include at the bottom of the email addresses a quick copy and paste distribution list. I have achieved this in the past by using a similar formula:
