I currently have a code that for combines cells within a range together and places them into another cell.
I want the code to only include cell that have a value in and exclude those within the range that are blank.
I have included the code below:
[Code] .....
I have a scenario where I have a rolling list of sales figures which get added to each week that passes.
I need a formula that will calculate the last 5 weeks of sales and generate an average - which I think I have an idea how to do.
The sticking point is that so as not to skew the averages, when there has been an exceptionally busy or quiet day for a reason we know about I exclude the sales from that week.
This then interferes with the averages as it either takes it as a zero and lowers it or seems to stop formulas from working.
So to summarise:
Average of last 5 weeks sales
Excluding any blanks
Dynamic enough to always pick up the last 5 values in the list (i.e. the last 5 weeks)
I am writing a formula for finding a maximum out of three average values. The cells that will be populated with data are A1 to A5; B1 to B5; C1 to C5. The final cell where I want to write the formula needs to show the maximum of the three averages (average of data in each row).
The difficulty is that sometimes only the A and B rows are populated (and sometime only A row is populated) and if B and/or C are blank, the formula fails and shows "#DIV/0!".
How can I write so that if C is blank, then evaluate only A and B data. And If both B and C are blank, then just display the average of row A.
I have an array formula that calculates the average of numbers between two dates:
{=AVERAGE(IF('Date Range'!$B:$B>$H$4,IF('Date Range'!$B:$B<=$B$3,'Numbers to Sum'!$C:$C)))*100}
The start date is the day after the date in H4 and the end date is in cell B3. The dates are in column B and the numbers to sum associated with these dates are in column C.
Some of the cells in column C are blank and my formula is taking these blanks into account in calculating the average, while I would prefer not to count them in the calculation.
Can someone please suggest how I could amend the formula above to accommodate this?
I have the following line in a macro:
Range("b22:L" & Range("J" & Rows.Count).End(xlUp).Row).AutoFilter
This selects rows based on whether they contain data and creates an autofilter of the range.
The data Im using this on will have blank cells as the bottom rows but they will contain formulas that blank the cells based on ISNA() conditions,
How do I get the above code to only select cells with visible data and ignore those that are blank but contain formulas.
How can i exclude Blank or cells that have a 0 when plotting my graph? Right now everything is very small because i have about 50 cells, some with quantities and some with zero quantities.
View 9 Replies View RelatedIm using an advanced filter that uses the following criteria
Days Late Note(s) Note(s)
>90 <>*agreement* <>*QTR*
This shows all data over 90 that do not incl the words agreement or QTR in a column marked Note(s).
My problem is that I do not want to show records that are Null in the Note(s) column.
Note(s)
<> Does not work (possibly because it is text and not Numbers)
as this does work if used on records that contain numbers.
I have a spreadsheet with data in every other column (i.e. A, C, E, etc.). I am using the "filter" option in Excel on the aforementioned range of cells although the little filter icon shows up on all columsn, including the blank columns in between my data. Is there a way to only have the filters show up on the columns with data?
View 2 Replies View RelatedI am using the standard validation from the tool bar. What I am trying to do is in
check the date in a cell and if the new date is Greater and or equal to another date in another cell. The problem is I am having is when the cell that I am checking for a date is Blank the validation does not work and one can put in a date. I tried unchecking the "Ingore Blank"
Spreadsheet example attached.
I have a VBA code that when activated it copies 6 cells from sheet1 to the next available row in sheet2 - A2:F:2.
alerting and stopping the routine if any one of the cells in sheet1 are empty so the user has to input into all cells before the routine will execute.
does it need a check cells for content if error highlight empty cell.
s1. Offset(1, 2).Range("K4:K464").Formula = "=IF(ISNA(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)),"""",(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)))"
How do you get code like above to work in Offset? When i run it the cells remain blank but the code is above in the fx.
I have this calculation which works fine if all cells have a value. But it will happen that cells in the range are empty.
=SUMPRODUCT(--(1*LEFT('Courses input'!C4:D6,1)-C3<=0), --(1*MID('Courses input'!C4:D6,3,1)>=2))/E3
What can i do to exclude empty cells in the range from calculation?
I have a list of weeks 1-4 for the fiscal month of January. I have a total column. Each week the appropriate week is updated and the total is updated via formula. The total column is just formulas adding Weeks 1-4 up. I also have an average column with the AVERAGE formula beside the total it that should give me the weekly average for January. However, it's trying to average all the weeks instead of just the weeks that I am on.
For example, Week 1 is 1,000,000. Week 2 is 500,000. Week 3 & 4 are 0 because there is no data in there yet. The AVERAGE formula keeps showing 375,000 instead of 750,000. It's averaging all the weeks and I just want it to average Weeks 1 & 2 right now, but automatically average Weeks 3 & 4 when they are populated.
Is there a way to do a Formula (SUM) but exclude cells with invalid values? I would like to add up all values in attached spreadsheet for cells A14 to A28 and again for A49 to A63, as well as get an average C-14 to 28 and again for C49-63.
As some of the cells contain text rather than numbers, the formula doesn't work. how to exclude these cells?
Say I have the following:
Cell A1: male
Cell A2: male
Cell A3: female
Cell A4: male
I want to conduct a search using the value in cell B1, and return the row numbers for which the value in B1 exists.
So my formula in C1 is:
=small(if(isnumber(search($B$1, $A$1:$A$A4)), row($A$1:$A$A4)), row(1:1))
and I make it an array by CTRL+SHIFT+enter
So in B1 I type "male" (without the quotes). From C1 to C4 the values populate as 1,2,3,4
However, I only want the rows where "male" exists, in other words, i want an exact match and I want to exclude those cells that have "female"
I'm wanting:
C1 = 1
C2 = 2
C3 = 4
C4 = blank
Is there a way to do this?
I have a large data table that has autofilters on the headings.
I also have a "Data Summary" Sheet in which I would like to get a conditional average.
Here is my *working* array formula:
=AVERAGE(IF('Data Table'!$C$10:$C$65536=A2,'Data Table'!$BP$10:$BP$65536))
The problem is, it averages all cell values (conditional upon the C column's cell being equal to A2 of course), whereas I only want to average the VISIBLE cells that match the condition.
I have tried using a little VBA with:
Function Vis(Rin As Range) As Range
'Returns the subset of Rin that is visible
Dim Cell As Range
Application.Volatile
Set Vis = Nothing
For Each Cell In Rin
If Not (Cell.EntireRow.Hidden Or Cell.EntireColumn.Hidden) Then
If Vis Is Nothing Then
Set Vis = Cell
Else
Set Vis = Union(Vis, Cell)
End If
End If
Next Cell
End Function
and then trying the formula:
=AVERAGE(IF(Vis('Data Table'!$C$10:$C$65536)=A2,Vis('Data Table'!$BP$10:$BP$65536)))
but it does not work.
I have a column that contains combined data of numbers and letters. I want to filter that column to exclude cells that contain the letter "d" or "f". I am trying to create a pivot table from the results of the filter to only display the ID #s that do not contain the letters "f" or "d".
The data inside the fields is not the same length and is not listed in a particular order. I have over 14,000 records I need to filter.
Data set example: The items in red are an example of the cells I would like to exclude from my worksheet. Is there a way to filter without deleting the data?
445-0706634F946
5886-K949-D001
445-0716622F946
445-0706634F887
497-0480473
445-9995967F025
6569-9788-2342
9016-1300
9016-C765-875
123-S765-87645
I have a single column of data that is, perhaps, 100 rows long.
I have ticks, crosses and 'N/A' in various cells within this column. There are no cells that are blank.
I want to count the number of ticks within the column and want to be able to say:
If the number of ticks is = 100% then it's green.
If the number is >75% and <100% then it's amber.
If the number <75% then it's red.
I also want to exclude the N/A cells from the % calculation.
I am trying to finish conditionally formatting a tracking spreadsheet. If column O contains a zero, I want the row highlighted. The problem I can't stop is the enpty cells are being treated as a zero. The formula I am using is =$O3=0 the range it applies to is =$A$#:$P$92
View 2 Replies View RelatedI would like to average a non-continuous range of cells while also excluding all zeros.
I am averaging hours worked and the hours are found in cells:
B2, D2, F2, H2, J2, L2, N2
Some of these cells contain zeros at this time and I do not what to include the zeros in the average.
I have found formulas that would work but they are all with continuous cell ranges.
Any way to exclude colored cells from addition in a column. I will attach a simple example document.
I am building a spreadsheet to keep track of my monthly spending, and debt balance. I keep track of the total amount of bills I pay each month. As I pay them, their respective line is highlighted green in the spreadsheet. I would like to create a macro/formula which would sum the remaining cells in the column which are not highlighted to display the remaining monies which need to be paid out. I'm not sure if this matters but I am using office 2010.
billSample.xlsx
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))