VBA To Display Value In A Cell Based On Another Cell Value
Jun 4, 2014
I have several columns (d,o,z,ak,av,bg) where I enter material numbers - there is approximately 180 different material #s. Columns (f,q,ab,am,ax,bi) are empty and designated for text/comments entry. Some material numbers need to have specific comment displayed - there is approximately 25 material numbers and each one has different comment attached to it. I need to display these comments automatically without user interaction. Material numbers change weekly and are in rows 5:130 in their respective columns (d5:d130,o5:o130,..etc)
This would be easily achieved with formulas in columns (f,q,ab,am,ax,bi) but I can't use formulas as these may be overwritten. Any thoughts of how to do it with VBA?
View 1 Replies
ADVERTISEMENT
Jun 4, 2013
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
View 1 Replies
View Related
Feb 18, 2008
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies
View Related
Jan 12, 2010
I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
View 2 Replies
View Related
Sep 12, 2012
Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
View 7 Replies
View Related
Jun 24, 2014
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
View 2 Replies
View Related
Aug 8, 2012
I have a map of the US composed of 50 shapes (one for each state). I need each shape to appear or disappear based on a value in a corresponding cell. I can't use VBA for this as it needs to function for users in a high-security Excel 2003 which doesn't allow macros.
View 1 Replies
View Related
Feb 25, 2014
I have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
View 1 Replies
View Related
Aug 17, 2007
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
View 3 Replies
View Related
Feb 28, 2008
Is It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?
View 3 Replies
View Related
Feb 27, 2012
I have the months in a drop down menu January to December in cell B1.
Is there a way for excel to display the dates in that particular month based on the selection in cell B1?
For example, if I were to select "February", I'd like Excel to display:
02/01/2012
02/02/2012
...
02/29/2012
in cells A5 through last day of the month?
View 5 Replies
View Related
Jan 29, 2013
I have a combobox that returns me the names that are in a spreadsheet.
I need a return label, the index (address of that cell that the combobox returned), how do I do that?
View 5 Replies
View Related
Apr 8, 2008
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
View 9 Replies
View Related
Apr 29, 2014
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
View 4 Replies
View Related
Aug 24, 2009
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
View 9 Replies
View Related
Dec 6, 2013
I have two columns, column Q and R. Column Q has Data Validation set, where you can only choose one of four options in any given cell between rows 2-250,000. When "Complete" is chosen, the cell turns green. Now when "Complete" is chosen in column Q, I need the cell next to it in Column R to auto-fill today's date. However, the date should not update to the next day. So if the cell autofills to today's date, which is 12/6/13, tomorrow, when the date changes to 12/7/13, the cell still reads 12/6/13.
View 4 Replies
View Related
Nov 20, 2013
EXPENSE MASTER 2013 sample color.xlsx
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
View 3 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related
Dec 16, 2008
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
View 5 Replies
View Related
Jul 17, 2009
Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
View 2 Replies
View Related
Jan 19, 2009
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
View 8 Replies
View Related
Aug 13, 2008
I have Excel 2000, recently when I format a cell to display mm/dd/yyyy and enter mm/dd/yy, it is displaying dd/mm/yyyy. Or it starts out correctly and during a future opening of file it displays incorrectly.
View 2 Replies
View Related
Apr 24, 2014
When inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.
The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)
Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)
View 4 Replies
View Related
Apr 23, 2008
I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies
View Related
Apr 14, 2014
I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
View 6 Replies
View Related
Aug 12, 2014
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies
View Related
Feb 9, 2009
I want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.
View 3 Replies
View Related
Sep 4, 2007
Is there a way to have image box display an image with a name matching data from a cell? example: if I type "hello" in cell a1, Image box will load image named "hello". And display new images by changing the name in cell a1. Note: the images will be located in a permanent folder.
View 3 Replies
View Related
Oct 22, 2012
I'm trying to find a way to display the latest stage that my processes are in, in a specific cell. Looking at the attachment, basically I need to display in cell E2 that my "Process 01" is in "STAGE AB" (because that is the latest stage populated with the achievement date). So similarly, for row 3, it should state "STAGE L".
View 3 Replies
View Related
Apr 3, 2009
I have several hyperlinks that may or may not contain data, the linked cell will display "0" if there is no data. When I print I dont want the "0"s printing.
How do I make the cell display nothing when a hyperlink cell is nothing?
View 4 Replies
View Related
