2012PlayerStats.sample1.xlsx
I have a list of players and the team they play for in Columns A and B.
In column E I have created a list of only unique names and in F I need the Team the played for last. However with Vlookup I am only getting the team they played for first. How can I get the team they played for last?
I have tried vlookup and index/match and get the same.
I have two sets of data, as per example below, and trying to figure out the syntax to perform a lookup based on the first two words in a cell (separated by a comma) in the corresponding data, and return a mapped value.
Master Data
Stock
Description
Code
[Code].....
I tend to use a lot of For Each loops when I want to go through a range looking for something but this time I'm not so sure it will work.
I have 9 databases each containing over 400 rows with different pieces of client information, these databases are shared between around 40 people (I've also used the 'Allow users to edit ranges' utility to restrict access). What this means however is that the users cannot delete an entire row, instead they can only 'clear contents' on individual cells. This is fine until I try to generate statistics from the databases using autofilters which stop at the first blank row.
So I need to write a backwards for each statement that starts at the bottom and deletes all the blank rows on the way up to the top. I've tried similar things to this before using the For Each but when you use it to delete a row it sometimes skips the next row as it continues at the next one.
I've not managed to get it to work before, I'm just looking for a little guidance really as to how to do this correctly.
VB:
For TopRow = 1 To BottomRow = Range("A1").SpecialCells(xlCellTypeLastCell).Row Step -1
'If is blank delete row.....
Next
How can I determine what the bottom row is in a range in VBA? I have an SheetChange event sub that takes in Target as Range. I want to know what the first/last row/column is in the Range. So, for example, say the Sheet has values in A1:B5 and I paste over A1:B4. Target will be A1:B4. I need a method that returns 4. I tried Target.End(xldown).row, but that gives me 5 (since theres data in A5).
View 4 Replies View RelatedI've recorded a macro that selects a bunch of cells so I can work with them. However, it's hard-coded to the bottom cell of H1551, and I need it to work no matter how large the range is.
Code:
''' Concatenate column H with B & F
Application.Goto Reference:="R2C8"
ActiveCell.FormulaR1C1 = "=CONCATENATE(RC[-6],"" "",RC[-2])"
[Code]....
I now have everything set up to do exactly what I want except this last bit.
All I want is for the overview page to show the top three referrers for each month. At the moment, it's finding the top and bottom 'scorer' but if more than one has the same score I can only see the first alphabetically.
I am in need if inverting a Range (top to bottom), in the same location, like this ....
1 2 3
4 5 6
7 8 9
to...
7 8 9
4 5 6
1 2 3
How would this be done ?
I am trying to set up a spreadsheet which automatically calculates the start and end dates of project tasks, by looking at the order in which tasks need to be completed. I have attached a spreadsheet to show what I am trying to do.
View 3 Replies View RelatedThe following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim nextRow As Long
If Target.Column = 11 And Target.Cells.Count = 1 Then
[Code].....
I have a s/s encompassing over 350,000 rows.
Data consists of a series of ranges from columns A:N and rows varying in number between 3 and 30.
There are two blank lines between each range of data.
Each range is (with exception) numerically ordered down column H (e.g, 1, 2, 3, etc).
Problem: there are around 1100 occasions when a range contains a row of data which is to be disqualified from consideration. On these occasions the data always appears in the top row of the range and is identifiable in column H by the nine codes 111, 222, 333, 444, 555, 666, 777, 888, and 999).
I wish to find a macro which will :
1. where the top row of a range in column H is one of the codes 111 to 999, transfer that row of data to the bottom of the range.
2. delete the now empty top row from which the transfer was made from.
3. insert a new blank row at the bottom of the range below the row which the data was transferred to (in order to maintain the two blank rows above and below each range).
I was wondering if there was a way to create a two cell dynamic range that doesn't expand, but instead shifts.
The cells that I'm interested in are always at the bottom of the column of data. For example, the first two cells I want as my range are C13 and D13. Then, for my next use of the range, I would like it to include C14 and D14.
I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
I have a spreadsheet which is going to be populated everyday from figures from another spreadsheet using autofilters and the very useful SubTotal worksheet function. I'll attach a copy of the work in progress, also there will be a macro in here which Everytime the user presses update, it copies a range of cells and formatting and pastes it to the next available cell on the right. I've also drawn the movement of the cells i'd like The reason being, is that its going to give day to day, up to date figures from a datasheet.
The problem i have is that when i come to populate the grid which has been copied, i need a calculations to populate each cell in the Less<1week column, then when it gets to the bottom, move Back to the top, and accross to the right 1, and then populate down again, and so on until the end of the grid in question, i dont think i can use a for/next loop becuase it will be a different column address everytime. I dont really like loops, but i feel this needs it.
Is there any easy way to identify the bottom left cell in a named range?
View 6 Replies View RelatedBasically, I am trying to write a program that will index match through a range and if it doesn't find the value that it is matching to, it will add the value to the bottom of the range it is indexing against. In other words:
My C column has a list of CUSIPS. In column J, I would like for the User to be able to add a list of cusips and then have the ones that don't already exist in the list of CUSIPS in column C be added at the bottom of the range. I have written a macro now that uses the index match, but for some reason it adds all of the cusips that exist in J range to column C, not just the ones that are missing. I can provide a template if necessary.
Sub Filler()
Dim Row As Variant
Dim NumberOfRows As Long
Row = 0
[Code]...
How to sum using variable start and end points?
For example,
Column A is the list of start dates, and Column B is the list of end dates to be used at the variables.
Column C is a list of dates, and Column D is the corresponding temperature data to Column C.
What I would like to do is create a new column (E) that sums the temperature data from Column D based on the start and end dates from Column A and B respectively (these dates to be used to match the dates in Column C).
can anyone help me how to create a macro which will copy range of data based on a criteria? I have a worksheet which contains dates on column C rows C30:C64, dates would start from march 29 to may 2. how can I copy the range of data from April 1 to April 30? the criteria which will be copied will always be the start of the of the month up to the end of the month...meaning if the dates placed is like April 26 to June 6, it would automatically extract the range for May 1 to May 31 and place this on another sheet.
View 6 Replies View RelatedI have a daily collection of data based on half hour meter readings. Responsibility for this data is to be split between core and non-core hours so for example core hours would be from 6:00 to 18:30.
What i would like to do is have a combobox for both the start time and end time allowing the user to change these as appropriate.
Where i'm struggling is using these comboboxes to select the data between these two times and total the values per row.
My data is currently arranged with the times (staring at 00:00) running horizontally on row 14.
I am using the below code to sum from "L2" to LastRow2
Code:
LastRow2 = ActiveSheet.Range("L6500").End(xlUp).row
LastRow3 = ActiveSheet.Range("L6500").End(xlUp).End(xlUp).row
Cells(LastRow2 + 3, 16).Formula = "=SUM(L2:L" & LastRow2 & ")"
How can I replace “L2” with “LastRow3” which is a dynamic starting point for the range sum?
I would like to create a dynamic range of numeric type in a single column. Only the precise position of one middle cell is known, let's say $A$20, but the range is supposed to extend above and below $A$20 and to finally include all adjunctive, positive and negative numbers in that very column.
Having read the ozgrid-resources on dynamic ranges let me experiment with the following line, however, it seems to include all entries in the column disregarding the format type or the fact that they should all be adjunctive (meaning that wherever there's a text entry it should be seen as the natural end of it): ....
I'm trying to write a bit of code that will allow me to clear some sheets. One of the sheets has formula for x number of rows, and these need to be left intact. Under these forumla there is an area where data is pasted, and this needs to be cleared becfore starting the process.
Colum A is blank, apart from cell A1 (the column heading) and another cell (variable row) with the value 'Paste here'. I've used this variable cell in other macros on the sheet as a marker, so need this to stay. I was going to use this code below, but I don't know how to tell it to select from the current active cell to the bottom of the spreadsheet.
Any macro or a VB script to fill the numbers in between the "start" and "end" range . The only input that will be provided is the start and end of the range.
For example if the start = 100 000 and end = 100 010.
The output should be
100 000
100 001
100 002
100 003
100 004
100 005
100 006
100 007
100 008
100 009
100 010
I need help in simulating the functionality of the OFFSET function with some of standard Excel functions which are shown at this webpage (I will be using this converter to generate the webpage from the sheet):
Spreadsheet Converter Supported Functions
I ask this because I need to create an interactive online calculator which absolutely needs to have the ability to allow the user to select the RANGE of the data to be analyzed. I included an example sheet with the offset function in the pink cellDo you think any other standard excel function can be used to simulate its functionality?
I need to create a range of cells in Column A. I know the first cell, A2. The final occupied cell will vary. Once I have the range object I would like to step through and analyse each cell in turn using a For/Each loop.
The code I have so far is:
Public all_structures As Range 'Range required for for/each loop Column
Public last_structure As Range 'Last cell in Column
Public molcell As Range 'Current cell in range
' Establish range of cells in Column A
Set last_structure = Range("A2").End(xlDown)
Set all_structures = Range(Range("A2"), Range(last_structure)) ***
' Loop through each structure in turn
For Each molcell In all_structures
Loop code In here
Next molcell
When I run I get an error message of "Run-time error '1004': Method 'Range' of object '_Global' failed". It does not like the line marked ***.
Within range Sheet1!D4:D423, how can I have a macro called RestartClock start any time the Enter key is selected within a cell for that range?
View 7 Replies View RelatedIs there a way to start match from a relative position?
Say a match I have in column "A" returns 344. Is it possible to start a new match for column "B" from that spot, instead of having it return a match starting at the top?
I am looking to have the data ranges in tab 'Type' update automatically in 'Output' for a particular start date. So for example if I enter LBO into cell E3 in the 'Output' tab it will input the data range for LBO from tab 'Type' but from a specific start date.
I know I can achieve part of this via LookUp functions but it is the start date that has me stumped.
I have various start times for employees.
I need to find out the total movement in start times per week for the employees.
I have used MIN and MAX to find the earliest and latest start times, and then a subtraction to find the difference.
This works brilliantly until my employees who start around midnight.
If they have started before and after midnight, it takes midnight as the earliest time and 23:00 as the latest, giving a difference of 23 hours instead of 1 hour.
i.e.
Start Times
23:00, 23:15, 00:15, 00:30
Range of Movement
00:30 - 23:00 = 01:30
I've tried, =$B$9+($C$4>$B$9)-$C$4 but this does not work when the MIN reads 00:00.
I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies View Related
