I want to use a formula that will show the value of a cell if one of its preceding cells were a different value.
To be more specific, I currently have
Q2=$C2-J2+(L2*((1/12)*E2))
The value of cell N2 is dependent on the prior formula, but does not directly reference it.
Is there a formula that would show me the value of cell N2 if Q2 were different? For instance, if...
Q2=$C2-100+(L2*((1/12)*E2))
I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
i am trying to figure out, how to automatically update time, based on specific city's time zone? Lets say, if the city is dallas, time zone is Central GMT-6. In the next cell, the time shows up as Dallas's local time, instead of local computer time. And this time updates itself after every 2 min.
2ndly, if that city's time is later than 8:59 PM local time, that specific city's cell grays out.
Attach: Snapshot of sheet
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
This has got to be simpler than I'm making it out to be, but I'm stuck. I have a column that is created by a formula that counts the number of times a name appears in a list and prepends the number to the beginning of the name. The result is something like:
A1:
1JohnSmith021488
2JohnSmith021488
1JaneDoe102187
2JaneDoe102187
3JaneDoe102187
4JaneDoe102187
5JaneDoe102187
6JaneDoe102187
7JaneDoe102187
8JaneDoe102187
9JaneDoe102187
10JaneDoe102187
11JaneDoe102187
I need a filter that results in a list of names preceded by "1" (but not 10, 11, 12, etc.) The correctly filtered result of the above list would be:
DESIRED:
1JohnSmith021488
1JaneDoe102187
My autofilter searches for data that begin with "1", so instead of the above result, I get:
UNDESIRED:
1JohnSmith021488
1JaneDoe102187
10JaneDoe102187
11JaneDoe102187
There's got to be an easy way to do this, but I can't figure how to account for the variable number of digits (1 or 2 digits) at the beginning. It would probably work to set up an advanced filter for cells that begin with a number less than 2, but I don't know how to do that.
I am using the following formula (which I need to adapt) to enter a value in a cell C30.
C30=IF(A30>0,A30,0)
I will need to enter this formaula in column C rows 1 to 300.
The problem is that, in addition to A30 needing to be >0, I only need to enter a value in C30 if a value (>0) is found in column B (B29 going back to B1) before a value is found in the A column (A29 going A1). If a value in the A column is found first then I need to enter "0".
For example, if A30 is >0 and the previous A row A29 is >0, I want to enter 0 in C30.
Another example, If A rows A20 to A29 are 0 and B19 >0, then I want to enter A30 in C30.
I have a project network spreadsheet shown below and in column BT I need to identify each non-critical path task (value in column BS is "N") that has a critical path task (value in column BS is "Y") as one of it's immediate predecessors.
Predecessor tasks are listed with commas separating them in column G. They are also separated out into columns H through Q for another function in the spreadsheet.
Note: Task ID's can be numeric or text
*BGBSBT11Task IDPreceding Tasks * * * * * *(comma seperated)CP?
*12Start*Y*13aStartY*14baY*15dbY*16ebNX17cbNX18fcN*19g*N*20h*N*21ihN*22je,d,i,g,fY*23kjY*24Finishk**250***
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
I have data in the (various) formats as follows:
1) Text value here
1. Text value here
1.Text value here
1 Text value here
1)Text value here
Is there a way to take the cell contents from the first Alpha character? (i.e. no punctuation, no numbers). There are other numeric characters in the text values that I would like to keep.
I'm pulling phone numbers out of text strings. There is text string ("Office:") indicating that the number following is an office number (the number that I need). MID and FIND take care of this. There are sometimes two instances of office numbers in single text string, so adding a second column using the third argument of FIND lets me start another search past the first instance of an office number. We have a bunch of office numbers with the qualifier "(Text)" after the original "Office" but before the phone number. How do I catch these ones?
View 8 Replies View Relatedthe MONTH(NOW()) Function, as I need it to reference the month preceding the current month.
View 3 Replies View RelatedI need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedWhen I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have three cells in A2:C2 which require user to input some data.
What I want to achieve is to combine the data from A2:C2 in D2.
C2 is a field which user will input the date. He might key in 21/08/06 or
21/08/06, 30/08/06
I have tried using below formulas in D2 but without success.
=A2&" " &B2&" "&(C2)
=A3&" " &B3&" "&DAY(C3)&"/"&MONTH(C3)&"/"&YEAR(C3) (doesn't work if there are 2 dates.
I have attached a file which shows 3 scenarios if user input 1 date and 2 dates.
I have the following range of cells B2:Y3700. I want that when a value from 1 to 9999 is inserted in one cell of the above mentioned range, to copy the row number of that cell in the cell that is located in column Z and row is the number inserted in that cell. For example, if the number "1234" is inserted in one cell from range B2:Y3700, to enter in cell Z1234 the number of the row where is located the respective cell. At same the time is very important to me to not permit to insert the same number in B2:Y3700, so i believe that is need a macro code to check the cell from column z to see if value already exist .
View 5 Replies View Relatedformula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
I need to assign the ID value to the cell in the source column when it matches the cell value in the email column.
i.e from the email column the first cell value is bobjohnson@email.com his ID value is 0 I need to find all the cells with bobjohnson@email.com in the Source column and assign them 0.
[Code] ......
I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
View 2 Replies View Relatedi am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies View RelatedSAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
I have the following columns that return cover period dates.
Start of Cover PeriodEnd of Cover Period01-Nov-0631-Jan-0701-Jul-0831-May-0901-Dec-0930-Jun-1001-Jan-1131-Dec-10
I however need a macro that will delete the cell contents if the "Start of Cover Period" (column AK) date is > than the "End of cover period" (column AL) date.
Thus it must compare ak2 with al2 and if ak2>al2 then clear both cells. if AK2
I want to populate cell with a value(from another cell) as per count in another cell.
Say ex.
1. CELL A1 having Value 1000.
2. CELL B1 having Value 10.
3. Column C, should be updated with value of A1 cell as B1 cell times. How to do that.