Values Appear Twice In PivotTable Row Labels
Jan 31, 2010
I have a PivotTable that is summarizing a data table. In the configuration panel, I've dragged one column ("C92") to the "Row Labels" area. Likewise, I've dragged the same column to the "Values" area, where it defaults to "Count of C93". So far, so good.
I should mention that my values in column C92 are the whole numbers 0-7 and the string "NA". But in the output chart, each of these values is listed twice! And each count of each value is different! I'm attaching a cut-down version of the spreadsheet that shows this behavior.
View 2 Replies
ADVERTISEMENT
Feb 4, 2014
I have a PivotTable with data and I want to hide the row labels (in blue) that's in the first row.
See image:[URL]
PivotTable.jpg
View 4 Replies
View Related
Aug 3, 2007
The code I'm using that results in the following error message: "Run-Time Error '1004':
The pivotTable field name is not valid. To create a pivottable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a pivottable field, you must type a new name for the field." Here's the code, I've seperated it into each sub hoping that will make it easier to read:
Option Explicit
Sub main_prog()
Call td_metrics_import
Call pt_td_metrics("Pivot_Page1", "PivotTable1", "PivotTable2")
Call pt_td_metrics("Pivot_Page2", "PivotTable3", "PivotTable4")
Call create_graph
End Sub...............
View 8 Replies
View Related
Feb 7, 2014
I have an export from a database that I'm bringing into Excel 2010 of about 30K records. Data points are recorded numerically and I have their associated text "value label" (what it would be called in STATA, for example, not sure what it's called in Excel). I want to create various charts/pivot tables with the data and want the labels to be the text label, not the number.
For example, variable ASSIGNMENT has the following possibilities:
1
2
3
4
Here's what each of those "mean" (I have this in another table):
1 - Sick
2 - Overtime
3 - Court
4 - Present
How do I create a chart or pivot table where the labels are "sick", "overtime", etc., and not "1", "2", "3", "4"?
View 8 Replies
View Related
Mar 11, 2009
I have a UserForm and what I'm trying too do is change the color property of all the labels on the form simultaneously.
View 9 Replies
View Related
Jan 22, 2014
i create a chart in excel, is there any way to show only top 5 values "labels" in chart? just only top 5 values,,
maybe this pict can explain what i mean.. Top5.jpg
i need that chart can change automatically when i change the tables data
View 3 Replies
View Related
Nov 26, 2013
I would like not to have zero value labels in a column piled graph (it writes zeroes between one piled column and another)...
View 7 Replies
View Related
Jan 20, 2014
I'm having a problem modifying data on an existing chart.
I think I'm trying to add the Axis, I want A to Z, I'm getting 1 to 26
Code:
With Sheets("3.2").ChartObjects("Chart 25").Chart
.Select
.Activate
[Code]..... '
View 5 Replies
View Related
Jan 16, 2014
I have a worksheet that is just a list of items with a location listed next to each item. I took that list and made it into a pivot table and would like it to have it list the items with each location it is in displayed across. I have already set it to tabular form in the pivot table options, but if there are multiple locations it lists them vertically and I want them list horizontally for printing purposes. I have attached a screen shot to explain.
View 1 Replies
View Related
Mar 18, 2013
I'm trying to plot a function with specific values marked on the X axis (or at least distributed according to the said values). Namely, I have something like this:
And while it does plot the Y's as I want them to be plotted, X'es are just used as labels, which causes 0 and 100 to be equally apart as 933,9 and 944. How can I plot it, then, so that I simply select my desired Y values, their corresponding X values and get the plotted function?
View 2 Replies
View Related
Sep 2, 2007
I have a Column Graph that will be changing automatically as the data is changed. My problem is that for one set of data the chart looks fine....but if a number becomes negative the bar will overlap with the data labels at the bottom and cause it to be unreadable. I am not able to resize the x axis area or move the labels down any. Is there anyway to make the labels adjust automatically?
View 3 Replies
View Related
Jan 24, 2014
I have column in my table that calculates time in hours between now and ticket open date (ticket open date in B1)
so, in C1 i have following formula:
=(now()-B1)*24
Results are in hours, such as 15, 25, 32, 65 etc
In pivot table, I would like to see how many tickets with values of less than 24 or more than 48, etc
My available columns are: Region, Ticket#, AgingOpenHr(this new column).
I tried it different ways, and I cannot get it Less Than and Greater Than work under Values, works if I select grater than or less than in Label, but label does not produce consistent numbers.
View 1 Replies
View Related
Jan 25, 2010
"Is there a way to make values in a cell that are comma delimited (ex. cat, dog, fish) became separate labels in a pivot table instead of getting labels like 'cat, dog', 'fish, cat', 'cat, dog, fish' which represents the exact value in the cells.
The only real option I can think of would be to make an extra rows with the same data for each pet type. For example if the pets were 'cat, dog', there would be two almost identical rows except one would have 'cat' and the other 'dog'."
I have made a vba setup which can solve the problem. But it is pretty complicated and unstable. I need a solution which is not vba based. ~Or a least a very simple code!
View 2 Replies
View Related
Oct 29, 2009
I'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
View 4 Replies
View Related
Apr 30, 2014
I am unsure if this is supposed to be in the PivotTable or VB section, but given it is VB code I expect here is better.
[Code] ......
I can confirm the SourceData exists, and can be used to create a pivot table without error. Only when I try to RUN this code does it kick out saying, "Invalid procedure call or argument".
View 3 Replies
View Related
Oct 8, 2007
In the macro I am writing I open a pivot table which as you know creates a sheet. I would like to name that sheet. My problem is that the default name(number if you will) changes every time I run my macro so I am unable to define which sheet I want to give a name.
View 2 Replies
View Related
May 20, 2008
Is it possible to have both SUM and COUNT values on one PivotTable?
View 3 Replies
View Related
Dec 22, 2009
I have a document that is exported from an SQL database. Once I have the data I need to throw it into a PivotTable to analyze it. However, the export doesn't fill every cell with the information - instead displaying the cell value once until a new value comes up. Therein, there are often a number of blank cells underneath each entry.
I can overcome this by going into the document and autofilling each cell that doesn't have the information in it. However, some of the reports are very large and it is quite time consuming.
What I'm after is for a bit of VBA that will autofill the cells until it hits another new cell value then autofill this down until it hits another new cell value, etc.
I have attached a dummy copy of the report - one sheet, Raw Data, shows the data as it is exported and the other, Autofilled, shows how I would like the data to be displayed after the code is run.
View 2 Replies
View Related
Sep 24, 2009
I have been creating pivot tables (from the active workbook) with ADO for a while and its working great.
I just tried to switch to DAO and adapted my code accordingly but the new code fail at:
Code: ....
View 9 Replies
View Related
Jun 19, 2007
I have a data worksheet, which contains about 20,000 lines of journal entry info. There is a separate column for debit and credit, not one "amount" column. On another worksheet, I am aggregating the data to review the impact for this series of journal entries over a time period (12 months). Thus, my pivottable contains "Accounts" in the "ROW" and "Period" in the "COLUMN" sections of the PivotTable Layout. The "Debit" and "Credit" fields are then summed in the "DATA" portion of the PivotTable.
My issue revolves around getting the actual impact for each account for each time period. Essentially, I need an extra column inserted between each time period that sums the debits and credits for that period. Do I need a macro for this (not any experience with macros)? My file is way to big to share, so let me know if a pared-down sample would work.
View 5 Replies
View Related
Jul 17, 2007
Hide values in Column layout on pivot table i only want to show th total value as its based on quarter figures not per month and this way it looks like Quarterly totals are broken down per month and has to have 200 a mont whenits in fact 200 for the complete quarter, how can i had the 200 for each of the month and just have the total per country? This is what my pivot table looks like
county Month Quarterly totals
UK June 200
july 200
August 200
Uk Total 200
View 3 Replies
View Related
Sep 18, 2007
I have made a pivot table and in Pivot table option Merge labels for colum b. I the problem i am facing is once i give this the next colum text filed is automatically arranged in center. I want the next colum as left alignment. Once i delete some rows in the data then if i refresh it automatically align the next colum to center. I have given the preserve formatting as well as i have un selected the autoformat colum.
View 2 Replies
View Related
Jan 10, 2008
I am trying to run a macro inside a Worksheet_Change event.
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
If Not Application.Intersect(Target, Range("Mon_Data")) Is Nothing Then
If Target.Value > 0 Then
Sub Refresh_PivotTables()
'
' Refresh_PivotTables Macro
' Macro recorded 10/1/2008 by JackChappers
'
as you can see, i put the macro within the worksheet_Change event so that, when data is changed on another sheet (target.Value >0), the Macro is run (the macro, by the way, refreshes some Pivot Tables).
The refresh Refresh_PivotTables Macro works on it's own, but when i use it like this, i get the message:
"Compile error:
Ambiguous name detected: Worksheet_Change"
If it makes any difference, i also have another Worksheet_Change event above performing another action. I think that may be the problem, if it is, how do i run them both without the error?
View 4 Replies
View Related
Jan 11, 2008
In a pivot table the user is able to select multiple entities to hide in the 'Hide Items' field of the PivotTable Fields window. I would like to create a macro (or edit a macro in the VB Editor) that willl reset all 'Hide Items' in the PivotTable Fields window...effectively unselecting any previously hidden entities.
View 2 Replies
View Related
May 8, 2008
I need to make a pivot table with data from 2 columns. The data has columns named Unit Type and Name. There are 9 different unit types and over a hundred different names. I need to find a way to make a table that counts however many times the name VACANT shows up for each unit type. Is this possible using a pivot table?
View 3 Replies
View Related
Jun 18, 2014
I have a pivot table with a field called "created on" which is a series of dates, i want to create a field called "Days in Pipeline" which would essentially be =TODAY()-'Created On'
This doesn't seem to work, i get an error: Your formula includes a function that cannot be used in PivotTable formulas...
View 1 Replies
View Related
May 21, 2014
I would like to somehow select and print the used columns in my pivot table.
I currently have a code that prints TableRange2 but this also includes blank pivot tables columns which are not in use.
View 2 Replies
View Related
Aug 11, 2014
First, the code:
[Code] ....
My problem is with this part here:
[Code] .....
I need it to filter on anything beginning with 2613, not just 261302. Unfortunately, I do not know all the possible inclusions or I could just add them individually, so I need a wildcard to add to this filter and I have never done that.
Thus, I ask how to write a wildcard filter that will work in this pivottable.
View 1 Replies
View Related
Jan 27, 2009
I successfully created two PivotTables two days ago, but when I added more rows of data to the source worksheet I could not refresh either PivotTable view. So after much frustration, I deleted both worksheets and again tried to create a new PivotTable using the wizard. I keep getting this error, and have no idea what it is telling me so that I can go about fixing it:
"The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field."
View 2 Replies
View Related
Nov 20, 2006
I have a workbook with three sheets. The first is a list of employees with their managers. The second is the data about those employees (who they sold product to, and how much, on what date). The third is the PivotTable with the employees' sales. I have the Customer name in the Row field, and the amount in the Data field. I have two page fields - the Manager's name and the Employee's name. The example that I'm using so as not to violate my NDA is a Northwind knockoff. That's why the names probably sound familiar.
What I want to do is have the second pivottable page field (Employee) change, so that when I choose a manager's name, only the employees who report to that manager show up in that page field. I have a named range called "allEmp" (all employees), one called "buchanan" (all the employees who report to Steven Buchanan), one called "fuller" (all the employees who report to Andrew Fuller). (File attached, btw).
Private Sub Worksheet_Calculate()
Dim mgrRange As Range
mgrRange = Range("allEmp")
Range("$b$1").Select
Select Case ActiveCell.Value
Case "Andrew Fuller"
ActiveWorkbook.PivotTable("EmpSales").PivotFields("Employee").CurrentPage = Range("fuller")
Case "Steven Buchanan"
ActiveWorkbook.PivotTable("EmpSales").PivotFields("Employee").CurrentPage = Range("buchanan")
Case "Susan Erickson"................
View 6 Replies
View Related
