How can I Vlookup a table where some of the data is missing I want the sum -
=IF(P5<5,0,IF(P5<23,VLOOKUP(A5,CFT_MEDIA_INS!$A$4:$W$33,CAMPAIGNS!P5,FALSE),0))
to return 0 if A5 does not exist in the lookup table.
Does a keyboard shortcut exist to toggle the R1C1 function?
View 4 Replies View RelatedCurrently I am facing a problem that I want to copy data from sheet 2 to sheet 1.Here I am using vlookup function.But I have a problem that when there is two items of same name in sheet 1,it copies data from sheet 2 into both same items in sheet 1.How can I restrict and copy data to only 1 items.The sample data is as shown below :
Sheet 1 (Including duplicate item)
Apple
Apple
Ball
Cat
Cat
In sheet 2 (Unique item)
Apple 25
Ball 36
Cat 34
I have a vlookup function which takes the data from a table in a closed file. A folder where the file would be located will change based on the value in the cell reference.
I used below formula which works, but every time when i drag or try to edit and enter, the path of the file path brokes and i need to reselect the path where the file is located. Is there a way where i can stop this?
Code:
=VLOOKUP(A2,'C:&E1&[Myfile.xls]Sheet2'!$A:$B,2,0)
I cannot figure out why the Count function counts blank cells.. Data adjacent to the blank cells were pasted from Access datasheet.
View 8 Replies View RelatedHow do I lookup a table , eg. E4:G16 to see if that table contains a data.
I tried {=search(A4,E4:G16)} where A4 is in cell F10 but returns Value error.
When I use the formula:
View 12 Replies View Relatedlet me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
Using VBA, I am running code that filters the data in my column "Account" on my main sheet, creates a new sheet for each account in that column then copies the filtered data to the new sheet. There will always be the same list of Accounts with the exception that there might not be data for one or more.
In that case, I still need it to create a new sheet with the account name but just have some text stating "no data available for his account".
I can find code to search if a specific sheet name exists but, in my case, I don't know which one won't have data at run time.
I was hoping I could put a static list of the expected sheet names into an array and loop through that list and create the sheet for any that it can't find.
My list: FTL, DTB, CAR, BLD, RSG, STS
I have two workbooks open, the first is a summary, the second has new data that needs transferring into the summary. Before transferring the data I need to check that 10 specific sheets exist in the file with the new data.
I have found some code that checks for one sheet name, but really need to check for 10 specific names, if any are missing then I need a message to appear, listing the missing ones and stopping the macro from proceeding,
Dim mySheetName As String, mySheetNameTest As String
ActiveWindow.ActivateNext
mySheetName = "Data"
On Error Resume Next
mySheetNameTest = Worksheets(mySheetName).Name
If Err.Number = 0 Then
[code].....
I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden
View 2 Replies View RelatedI am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedI want to count how many fruits I have. But I only want to count if there is data in row A. I would like the formula to tell me how many of each fruit when there is data in row A. check out my example.
View 2 Replies View RelatedI have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
Using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup.
Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03.
I'm using the below code :
[Code] ....
Attached File : VlookMid.xls
using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup. Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03. I'm using the below
View 3 Replies View Relatedvlookup function. find whats wrong with my code
View 3 Replies View RelatedIF(ISNA(VLOOKUP(E24;Sheet1!$A$6:$N$25000;10;FALSE))=0;"NOT FOUND";"FOUND")
This Formula doesnt seem to work, it shows me either every row with found or not found..
If there is a match to E24 in other sheet and has a value in column 10 it should say found otherwise not found.
How do I use excel to refer one cell as a constant value while the second cell varries as the cell value changes along multiple sheets.
View 7 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm taking 3 very different reports and consolidating them into one manageable readable form. Only problem is that no 1 report has the same info. I've created a key to form pick up the same information that is read differently. As my spreadsheet grows so do the formula issues. I've had one report that has been the biggest pain to break apart. It takes several things and consolidates them, ex: big 2014 girl - dog 20145
I'm using a trim formula to read the last 5 digits that is the only consistent part of the string. =right(J3,5) to trim what i need to read (20145). this formula works. I'm than trying to preform a Vlookup based on what is returned from the trim. The trim number is located in a separate tab as the "key" 20145 = golden Labradors. formula for vlookup that works by itself, but throws up a blank cell when i point it to the trim cell.
=iferror(vlookup($A2,Info!A:ZZ,2,False)" ")
$A2 = the info 20145 from the trim
Info! = is the tab with my 20145 = golden Labradors
A:ZZ = the range in which i need it to find 20145
2 = the second column where it should find 20145 = golden Labradors
False = exact match.
Why my formulas work separately but not when used together? The Vlookup will work if I type in the number 20145. I don't want to type 20145 anymore. I want to use the trim and have the vlookup notice the number pulled from the trim.
I am having issues using the INDIRECT function to lookup data from a sheet with the same name as that appearing in a given cell. For example, in cell D27 i have the text "S1_358_810" (Not including quotations). I also have a sheet named "S1_358_810". My formula is as follows;
Formula:
[Code] .....
However this is returning #N/A. There is a list of numbers in sheet S1_358_810 in column N and from that I want the value in column Q (thus 17).
I have a vlookup function that is looking up a range of cells. I would like it to look in the range and then sum up all of the values that meet the criteria. At the moment it will only bring back the value of the first match it finds in the range, I would like it to bring back the sum of all the values it finds in the range, is this possible? Example:
Vlookup(Jan-08,$a3:$c$7,column 4 values, 0), if Jan-08 is listed in the range more than once, I would like it to add up all the values in column 4 that match.
Function sequence giving me "N/A": =VLOOKUP(LEFT(C6,5),H:I,2,FALSE)
Basically, I have numbers that each start with a unique sequence. The first 5 numbers of that sequence represent a certain cell carrier.
What I want to do is have the function look up the first 5 characters of a cell and depending on the 5 characters, I want it to return a certain value.
My idea with the vlookup was to have the lookup value be the first 5 digits and then in my table, it would take only those 5 digits and return a value I have specified in the second column.
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
View 5 Replies View RelatedSee attached file for my sample workbook.
What I would want to happen is that I want to be able to use Vlook up by using the Value of the Textbox1 in the Info form and place the vlookup result in the fnameresult box.
Data are in Nickname sheet A:B
test template.xlsm
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
View 2 Replies View RelatedI have to extract multiple words from the string using VLookup function.
(Example :"Cell A1 "This is the best example")
Example : Finding "This" from cell A1- result VLookup (Sheet1) A1:D12
Finding "IS" from cell A1- result VLookup (Sheet2) A1:D20
Finding "BEST" from cell A1- result "Excellect"
Need to haev function for this
Trying to do Vlookup with If but dont know how , I can do the concatenate function and then Vlookup as in Sheet 3 but that is too much of load to deliver in quick time specially i have pull data in dynamic and continuous update.
View 14 Replies View Related