I am trying to count how many work orders we have created from 3 months (90 days) ago. In an effort to make the input work minimal. I wanted to use the =Today() formula and then subtract 3 months.
So I currently have =Today() in A1 and then (A1-90) in cell B1 and I get the date I want.
However, When I use a countifs formula and my criteria is
What I am looking for is a macro/formula that will look at a unit number, then the type of work done, then the completion date and decide if the same type of work was done on the same unit within a 7 day span of time.
Example
Unit is 11111, work is plumbing completion date is 10/4/07
Unit is 11111, work is plumbing completion date is 10/7/07
This means the work has been done 2 times (obviously showing that it did not get fixed the first time)
Is there any way to mark an X in the square with the formula, or any type of identifier what-so-ever
I have attached a spreadsheet and hope it helps
Again I know this is complex so it is OK if no one feels like messing with it but I wanted to check here first.
I'm trying to count the rows of a worksheet based on the location selection. Heres what I'm using:
[Code]....
Before I add the Vlookup, I get a number of 50. I should get at least 40+, but after adding the
[Code] .....
I get "0."
I'm wondering if I need to use VLookup differently in this case ????
I am trying to create a formula that will determine the number of orders for a specific customer whose orders have a pallet count between a certain range. The customer code is a cell reference, as well as the beginning and ending values I am looking for. I have the data on a separate tab from where I am putting the formula.
Here is what I was trying to use, but it was coming up with "0" for everything:
=COUNTIFS(Data!$I:$I,E7,Data!$I:$I,">=A8",Data!$I:$I,"
I need to count the amount of work orders that my employees have completed.
Review example.
How many work orders did chuck complete? (Column D)
How many work orders did brian complete?
Her situation is that she would like to be able to tally all the work orders that are created and either completed or pending. According to what she tells me she usually spends hours tallying the monthly worked on orders manually....
View 15 Replies View RelatedUsing Microsoft Access to pull from a database work orders. Some of those are what we call "dummy" work orders and have a letter in them, real work orders are signified by a 10 digit number. I would like to sort and eliminate the letters to find appropriate data. I am assuming I will need to copy into excel and do some sort of formatting but not sure where to start.
View 1 Replies View RelatedThe attached file Countifs issue.xlsx shows my attempt to construct a "CountIfs" formula that finds the one record out of ten that matches the following criteria:
a) Col A has 10 IDs. 3 of them are between 40 - 49, and another 2 are alphanumeric. This formula SHOULD identify these 5:
=COUNTIFS(A2:A11,">39",A2:A11,"<50",A2:A11,"4AB",A2:A11,"40C")
Doesn't work, It finds the 3 numerics but returns "0" when the two alpha-numerics are added.
b) Col B has a list of dates. 5 of the 10 are this month. This formula SHOULD identify them:
=COUNTIFS(B2:B11,(EOMONTH(NOW(),-1)+1),B2:B11,(EOMONTH(TODAY(),0)))
Doesn't work. It returns a value of "0".
c) Col C shows the Status for each record. 5 are "A" and 5 are "B". The following formula DOES find all the "B"s
=COUNTIF(C2:C11,"B")
But obviously I need the full formula to find the one record out of the ten that meets all the criteria.
in (a) and (b) and enable me to combine all three sections.
I work for an environmental company and we do emission testing. We specifically use the analysis software CEMsoft and ProRATA. After each test/run we get a text file (.txt) that we print out which then has to put into a specific pre-made excel data file.
I am wondering if there is a way to export the data from the .txt file and into the specific fields within the excel sheet. Can I encode the .txt or excel file to do it for me? Trying to eliminate the need to manually put in the data from the printed out sheet.
I need to enter a formula that calculates the time a report is received from the time it was recorded in our database. therefore, it needs to exclude non working hours. here are the fields:
A1 2008/10/10 16:30
B1 2008/10/11 09:30
C1 8:00
D1 17:00
A1 = report received
B1 = reported recorded in db
C1 = work day start time
D1 work day end time
Where the answer should = 2 hours.
I am not an experienced excel user and so far the only formula I have now is: =TEXT(B1-A1, "d:hh:mm")
And how do I account for weekends?
Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
I have the following formula to count the time between two dates and result in an answer with months/days:
=DATEDIF(E14,E15,"M")&" months "&DATEDIF(E14,E15,"MD")&" days"
The problem is that the function does not count the start date. Is there any way to modify this formula so that the start date is included?
For example if the start date is 02/01/2012 and the end date is 02/28/2012 it results in 27 days but I want it to result in 28 days or 1 month.
how to go about this or if there are any better date functions out there?
I have a query with regards to Counts
This is my below data.
No.Request NoDateSilverGold
1456661-Dec-20121
22018561-Dec-20121
32089561-Dec-20122
42099721-Dec-20128
52012121-Dec-20122
62068782-Dec-20122
72075952-Dec-20123
82045682-Dec-20123
92032252-Dec-20122
102015852-Dec-20121
in other sheet i have products Data by date wise
1-Dec-122-Dec-123-Dec-12
TotalRequest countTotalRequest countTotalRequest count
ABSilver2
Gold12
My query is how to get the total Request Count for Silver and Gold by date wise. Eg: Answer should be Silver has 2 (counts) & Gold has 3 (counts) How to arrive to that.. i have tried.. countif, countifs....
in sheet 2 cell g16 i need it to count how many times "horse racing" appears in sheet 1 column m and also for it to count how many "y" are in column g of sheet 1 and return something like
4 from 4
this example is taken from the attached sheet
basically it needs to count the yesses in column g that correspond to the horse racing in column n
so there could be 7 instances of horse racing ( 4 in this example ) and count the y's in column g which could be 2 ( 4 in this example ).
I am trying to come up with a way of tracking our new hires and how many go to each solution, within a few orgs. I am given a list by HR and run a series of =countifs to break down the matrix. I have a fixed number of solutions, all to be counted within each of 4 orgs. Ultimately I want to have multiple columns within each of these orgs to represent our various start date cycles.
I am trying to figure out the easiest way to load each of 4 count column to the next empty column, within 4 columns in a new worksheet.
I have data over the last 170 days. Each entry has a time stamp. I would like to count how many entries there are between 7:45 am and 2:45pm. A total count across all 170 days is needed, but it would be great if I could break that down by calendar day (i do have that as a column).
Here is a sample of the data:Friday11/15/1307:08AM
Friday11/15/1307:08AM
Friday11/15/1307:16AM
Friday11/15/1307:16AM
Friday11/15/1307:46AM
Friday11/15/1307:46AM
And the sheet has dates starting in June and ending in mid December.
I'm hoping there's a more efficient way to do this in that I'd like to replace - for example - over 100 formulas with just 1.
Take this simple example range in a column of numbers: 100 down to 0 and for each cell there's a count of how many times that number is greater than those that follow. The 1st is 100 times, the 2nd 99 times and so on... finally I need a sum of these resulting counts.
My current method would require over 100 formulas in 100 extra cells to do this
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedI have an array formula which reads:
{=SUM(IF(Female2!$A$2:$A$5000=$A403,IF(Female2!$C$2:$C$5000=C$402,IF(Female2!$1:$1=C$401,1,0))))}
However this formula only counts the number of cells (returns 96 for 96 cells) rather than adding the numbers in those cells to come to a total of 34.
i know its out there, i just cant find it. I have a list of names in a specific pattern of cells on a spreadsheet. I would like excel to give me a number of how many names i have in this spreadsheet. I know COUNT does numbers, but is there a formula that counts names?
View 2 Replies View RelatedI need to look at a series of data once per week and calculate the results. I'm trying to use COUNTIFS to get a result based on both the date I'm doing the analysis for and for the response.
I've attached a sheet that shows a sample of what I'm trying to do. Cell B1 contains the date range I'm using, and cell B18 shows the formula I'm having trouble with. I suspect it's because I'm trying to treat a date like text, but I'm not sure.
I need a COUNTIFS function (I think that will be the best function to use at least).
I have a two columns of data, column one is dates (mm/dd/yyyy) and column two is states (AK, MA, MI, etc). I need a way to count how many times a states comes up for a certain month. For example, I need to know how many times MA appears through the dates 1/1/2007 and 1/31/2007. Here's what I have so far. It works but I can only specify one date. =COUNTIFS('SHEET NAME'!D:D, "1/5/2007", 'SHEET NAME'!E:E, "MA")
I have a range that contains a mixture of hard coded data and data pulled from a database sheet. I want to average only the hard coded data not the ones in the cells containing formula. I need this to be dynamic instead of just selecting the cells as formula might be added later on.
View 1 Replies View RelatedI am working on a sheet that has over 150 tabs of information. It is a simple audit that allows for Yes, No or N/A to be selected for each audit category. I have an Outcome Summary tab that is pulling totals for all the audit information on each tab. I did a CountA statement to count any cells (from all worksheets) that had anything selected, so I have my count for the amount of files audited, but for the life of me I cannot come up with a formula that counts the ones that passed or failed the audit. Needs a formula that counts for Yes as 1, No as 0, N/A as 1 (these don't count against us) and doesn't return an error for a tab that wasn't selected.
View 3 Replies View RelatedI need to get together a countif formula that only counts if BOTH specified criteria are true... This is what I thought would work:
Code:
=COUNTIF(W1:W28, AND(>A18,
I have the following SUMPROCUCT in place and it works fine for current purpose:
=SUMPRODUCT(VLOOKUP($E$9,Rota!$C$4:$FU$369,{5,30,53,78,103,137},FALSE))
columns 5, 30, 53, 78, 103, 137 all contain text. However I need to amend some of these to text but I still need the SUMPRODUCT to add up.
Is there a way to amend the above formula so its counts both text and numbers in 5,30,53,78,103,137 ?
Count the number of occurences on 1 day within a 60 minute timeframe. data includes dates and times
View 5 Replies View RelatedI want to count the number of occurences involving 3 columns of a spreadsheet, but one of the columns is a date/time field, and I only want to analyse the date.
Example:
A B C
John 1 02/07/2009 09:45:10
Peter 1 03/06/2009 10:14:12
Fred 1
Peter
John 1 02/07/2009 09:45:10
How can I ask how many occurences of John are in column A, with a 1 in column B, with the date 02/07/2009?
The formula below was posted recently as a way to extract a numeric substring from somewhere in larger string. When I first saw this formula, how it "came up with the goods" and so I spent some time looking at parts of it to see what they did.
Although I've made some progress, I still don't fully understand it. Heres the formula, and below Ive detailed how far I've got:
=Iferror(lookup(9.99e+307,--mid(a1,min(find({1,2,3,4,5,6,7,8,9,0},a1&1234567890)),row(indirect("1:"&len(a1))))),0)
I hope my findings below are correct:
1. The formula is returning the first substring of contiguous numeric characters from the full string in Cell A1
2. 9.99e + 307 ensures that the search value won't be exceeded by the returned value.
3. The Mid function uses Min(Find( to get the character position of the first numeric in A1 (so MID then has its first 2 parameters). So far so good.
4. Now... I cant work out where MID parameter 3 (the substring length) comes from. I suspect its the row function, but can't see how as this isn't an array formula, and without CTRL+Shift+ Enter, I could only get Row to return 1 in my experiments (giving me only the first substring digit).
How does the formula return the correct number of numeric characters, (apparently) without counting them?
For work I keep track of errors in files my co-workers make. So in one individual cell it may look like this :
OP15698
OP25687
or
OP45986
OP74563
I simply need to count how many of those file numbers there are in one cell.
Is this possible? I also use Excel 2007.