Worksheet As Graph Paper
Aug 8, 2007Is there an easy way to format cells so that they are square like graph paper?
View 2 RepliesIs there an easy way to format cells so that they are square like graph paper?
View 2 RepliesWhen I hit the print button the worksheet prints on the paper in the bin. However, there are times when I need to print the worksheet on different paper which requires me to go into the properties and change the paper source from Automatically Select to Manual Feed. I have been trying to created a macro what will switch to Manual Feed, print the worksheet and then switch back to Automatically Select but have been unsucessfull.
View 3 Replies View RelatedCK Nursery and Finish Inventories.xlsxAttachment 207447
I would like the "Finish Summary by Age" tab worksheet to look like the "Nursery Master Sheet" and "Circle K 1 - CD Farms Nursery" tab worksheets. I'd like the "Finish Summary by Age" tab worksheet to cover the majority of the paper like worksheets on the other tabs.
how to choose 11 x 17 paper as my paper size option. They don't want it on anything but this size.
View 8 Replies View RelatedI have one page in excel to print. But I want to print it 1000 times and on each paper i need another serial number. How do I do this?
View 4 Replies View RelatedHow do you print on paper a formula that is in one cell?
View 9 Replies View RelatedI have 2 colums that represent the height and width of a paper edges. And now I would like to find a formula (somekind of an IF?) which would calculate automatically (taking account the values in these colums) which of these 2 measures make together ISO paper sizes A0 (84,1x118,9), A1 (59,4x84,1), A2 (42,0x59,4), A3 (29,7x42).
View 2 Replies View RelatedI am currently using a sheet of paper and tallying events. By tallying, I mean placing a small vertical line on the paper, then after 4 vertical lines, I place a diagonal line across the four. At the end of the month, I add all these up. I would like to make a spreadsheet to replace the tallying, but am not sure how to do it. Is this possible? I am beginner to intermediate with Excel and use 2003, but can switch to 2007.
View 3 Replies View RelatedPretty straightforward: randomly and infrequently, Excel ignores my selection of the rear tray paper source on my MX870 Canon. Able to correct issue only by closing out and re-opening Excel.
View 1 Replies View RelatedI want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
View 4 Replies View RelatedI got a workbook with one active sheet. There are 6 colums and 55 rows. I want to creat a macro or formula to automatically print each individual row on a single sheet of paper. i will only need the line with a specific value printed i.e only print value more then 5
View 9 Replies View RelatedI hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
View 5 Replies View RelatedI would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
How, using PageSetup and xlPaperSize properties, to setup a custom paper size of 4 inches by 6 inches???
View 3 Replies View RelatedI want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have a X-Y graph with 602 data points. My x scale is a counter from 1 to 602 and the Y is a decreasing set of numbers. When I hover my mouse over the points on the graph (I zoomed the graph) My first 3 points are all labeled as Point "1". At the end of my graph, my last 3 points are labeled 599,601,602, it skips 600.
I am using Excel 2007. Has anybody seen this before?
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies View RelatedI need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
Davyccexamp1.xls
I want to plot a quadrant graph as in the attachment, but I can't find them. how to plot them.
View 2 Replies View RelatedI need to create a graph using the data in the following format:
Item X Y
A: 10 100
B: 20 200
C: 30 300
D: 40 400
E: 50 500
etc.
I need to annotate points with A,B,C etc in the scatter plot so that the same can be quickly identified in the graph.
I have three colums of data.
First represet company , second colum represent data1 ( x- axis) and third represet data2 ( y-axis).
I want to plot x-y graph with the company name
Eg.
McDon | 10 | 20
In the above case i want to show a round circle or dot which will be 10 right on x axis and 20 up on y axis and near the dot i want to show McDon as company name.
See that attachement... Graph is coming well.. but i am not able to add the company name to the dots.. or pot of x and y intersection
I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
The numbers are shown below
11/03/09
-2.5
-3.8
-3.9
-4
-4.1
-4.5
-4.6
-4.9
-5.2
-5.4
-5.4
-5.5.......
I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedI want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
See attached sample file. Any way to get column graphs next to each item (horizontally), each column being the revenue for that item.
Attached File : Sample.xlsx
My macro prduces some text ang a graph on the screen and I can print the result.
Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
I know that to show a tab in VBA you can write worksheet("NameOfTheTab").select
However, it does not work when the tab is just graph.
Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....