Worksheet Change Looking For Multiple Columns

Apr 27, 2007

I have the following code to check and see if the user enters a number into a specific column. If so, and if the number is too high, the routine will automatically lower it to an acceptable number. However, I am wondering, is there not a simpler way to do this, besides using a bunch of OR statements?

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 Or Target.Column = 4 Or Target.Column = 6 Or Target.Column = 8 Or Target.Column = 10 Or Target.Column = 12 Then
Application.EnableEvents = False
If IsNumeric(Target.Value) = True And Target.Value >= 105.6 Then
Target.Value = 105.4
End If
Application.EnableEvents = True
End If
End Sub

This works just fine, but it seems kind of sloppy to me.

I was wondering if there might be a way to put the column numbers into an array, and then simply check if the Target column equals any number in the array. But I do not know how to do that without looping.

View 7 Replies


ADVERTISEMENT

Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color

Jun 12, 2007

In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.

View 3 Replies View Related

Move Data From 2 Columns Into Multiple Columns At Each Change

Feb 2, 2008

I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............

View 2 Replies View Related

Excel 2007 :: Automatically Transfer Columns From One Worksheet To Another In Multiple Columns?

May 4, 2013

I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..

Excel 2007
B
C
3
Name
Company

[Code].....

View 9 Replies View Related

Change Multiple Columns Into Multiple Rows

Oct 10, 2008

I have a large spreadsheet that contains and employee number and then up to 5 entries of Dependants (each has its own column). What I need to do is have 1 for each of the dependant information instead of 5 and have multiple rows for the employee if they have more than one dependant.

At the moment I am sorting the data by dep 1 name, pasting the data into a new sheet, deleting all the dep 1 stuff, sorting by dep name 2 and pasting that.........etc.

It doesn’t take too long to do but I just wondered if there might be a quicker way as this will be something I will need to do more often.

View 2 Replies View Related

Copying Multiple Columns From Multiple Worksheets To Summary Worksheet

Jul 28, 2013

I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).

The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.

In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).

I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?

View 5 Replies View Related

Copy Multiple Columns In Multiple Workbooks Into Separate Worksheet?

Feb 27, 2014

The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".

I would rather not have to copy this by column for each of the 4 workbooks

[Code].....

View 6 Replies View Related

Multiple Change Events In One Worksheet

Apr 21, 2009

I am trying to have multiple change events work in one worksheet and can not get it to work at all.

The simple setup is, I have a column for each month of the year.

I have several rows of numbers beneath each monthly column.

What I want to do is if I enter a date in say January (my change field), I want it to "ClearContents" out all of the data in the August column.

This works fine currently.

But say the next month I enter a date in February, I want to "ClearContents" in the September column. And so on for each month.

My various attempts at this does not recognize the second change agent, so nothing occurs.

Should I try to "call" each section, or use "Else If", or some other idea?

I've tried attaching the worksheet in case that helps to see what I am attempting.

There are extra "items" on the side and below the table that will be removed if I get this "change event" working. So this worksheet is a rough draft so far.

View 10 Replies View Related

Worksheet Multiple Change Events

Jan 23, 2010

I realize that it’s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it’s beyond my capabilities at this time.

I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the “DeptStr” string value that is relevant to the sheet calling the macro .

Each sheet will be a different department.•If the Target in either range has data added, then data will be added to the cell offset one column to it’s right.
•If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it’s right.

•There can only be one sheet active at a time.
•Only one sheet has data entered at a time.
•The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,

but they are not a necessary requirement in order to solve this problem if there is a more practical method.

View 3 Replies View Related

Multiple Worksheet Change Functions

Jun 23, 2009

I have a spreadsheet using Data Validation to offer a list of text values for cells in the range E6 - E100. I have a worksheet change funtion to change the colour of the entire row based on the text chosen from the list.

What I would like to add is an input box that will appear when the value in the cell = "COMPLETE" asking for a completion date and adding the inputted date to the cell in column I in the same row.

Existing Worksheet Change Code;

Private Sub Worksheet_Change(ByVal Target As Range)
'Colour code rows based on order status
Dim rng As Range, i As Long
Dim cell As Range, Answers As Variant
Dim Colors As Variant
Colors = Array(24, 15, 38, 44, 42, 20, 36)
Answers = Array("CLOSED", "SUSPENDED", _
"COMPLETE - Awaiting Inspection", "COMPLETE", "WORKING", _
"SCHEDULED", "READY")
Set rng = Range("E6:E100")
rng.EntireRow.Interior.ColorIndex = xlNone
For Each cell In rng
For i = LBound(Answers) To UBound(Answers)
If LCase(cell) = LCase(Answers(i)) Then
cell.EntireRow.Interior.ColorIndex = Colors(i)
Exit For
End If
Next i
Next cell
End Sub

View 9 Replies View Related

Hide Columns Based On Date Value In Cell (Worksheet Change Event)

May 23, 2014

Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.

View 2 Replies View Related

Worksheet Selection Change - Multiple Checkboxes

Apr 24, 2013

I have an excel sheet where I can enter a text into A4, when this is valid a checkbox1 will appear if there is no value then the checkbox is invisible.

I have used a macro 'worksheet selection change' to do this but unfortunately I can only use this once in a sheet. I need to do this for upto 10 checkboxs that corrospond sequentially with text starting at A4 for checkbox1, A5 for checkbox2 etc....

The routine I have used for one check box is below. Can this be changed for multiple checkboxes?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("A4") = isblank Then
CheckBox1.Visible = False
Else
CheckBox1.Visible = True
End If
End Sub

View 7 Replies View Related

Change Value Field Settings For Multiple Columns At Once

Aug 3, 2012

I have a big table with lots of columns for which I want a pivot to sum the data in the columns. Most likely because there are lot of blanks in the data Excel automatic makes a count of the data when I drag it into the pivot table. Now I have to change for each column one by one the Value field settings from count to sum. Is there a way to change the Value field settings for multiple columns at once from count to sum? If not can I somehow change the settings of the pivot table so default the Value field settings will be sum when I drag it into the pivot table?

View 4 Replies View Related

Worksheet Change Not Firing When Pasting To Multiple Cells

Mar 17, 2014

The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.

[Code] ......

View 4 Replies View Related

Worksheet Change Event Spanning Multiple Worksheets

Nov 21, 2011

I have a workbook with 33 worksheets (31 date tabs and a Month To Date and Year To Date tab)

I want to have a clickable cell on each of the 1-31 date tabs to point to the MTD

I know I could do this easily with a hyperlink but I would rather have a clickable cell.

I have achieved this on an individual worksheet using the following code

Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Not Intersect(Target, Range("$R$3")) Is Nothing Then Sheets("MTD").Select
End Sub

My question is: Do I have to copy this to every single worksheets code or is there some way have all sheets read the same private sub? (I guess it negates the point of a "private sub")

Way to do this as it would make editing any changes easier than having to do it 31 times.

View 3 Replies View Related

Worksheet Change Event For Multiple Target Cells?

Jan 20, 2014

I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.

Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?

Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.

Code:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then
Rows("5:5").Select

[Code]....

View 3 Replies View Related

Restrict Worksheet Change Event To Multiple Non Contiguous Ranges

Nov 20, 2007

Can you have more than 1 worksheet change event on the same worksheet, if so, how do you name it to prevent the ambiguous name error. What code would I need to select a text value in colums e11:e15 based on the cell value in cell named STATE and place the selected value in cell e16. I have, thanks to this resource, one worksheet change event that selects a numeric value from any column E3,F3:F7 and places that value in cell C4. but the same code doesn't work for the new worksheet change event.

View 4 Replies View Related

Combine Multiple Columns Into One On Another Worksheet

Jun 10, 2008

I am trying to combine the data of 31 columns into one column on a separate worksheet. The number of pieces of data in each column is different and as a result I am hung up on how to code the macro so that it automatically moves to copying the next column when a blank cell is reached, as it currently copies until it reaches the 100th row and then moves to the next column even though they're blank.

Sub CopyColumns()

Dim improw As Long, impcolumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long

Application. ScreenUpdating = False
Set ws1 = ThisWorkbook.Sheets("Data")
Set ws2 = ThisWorkbook.Sheets("Details")

'paste location on ws2
improw2 = 2
impcolumn2 = 2

There are column headers for the data on ws1 in row 2. The other thing I would like to do if possible is copy these column headers from ws1 onto ws2 by pasting them to the left of each piece of data (impcolumn2 - 1).

View 4 Replies View Related

Copy Columns From Multiple Worksheets To Single Worksheet

Apr 8, 2014

I have Folder with almost 21 or 22 Excel files depending on the working days in a month,

All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.

To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.

View 1 Replies View Related

Combine Multiple Worksheets Into New Worksheet Without Duplicating Columns

Feb 15, 2013

I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.

View 2 Replies View Related

Copy Multiple Columns Based On Search Criteria To Another Worksheet

Sep 27, 2011

Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria

Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0

View 1 Replies View Related

Worksheet Change To Function To Add Text To Cell Which Initially Triggered Change

Jan 10, 2014

i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.

The existing code i have is:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"

[code].....

I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?

View 3 Replies View Related

Worksheet Change Event :: Change Color As A Result Of Calculation

Jun 17, 2009

an event macro to change the font colour of a cell whose value changes as a result of a calculation.

View 9 Replies View Related

When Change The Worksheet Selection Change Event Nothing Is Happenning

Jul 21, 2009

Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.

When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.

View 4 Replies View Related

Worksheet Change Event Triggered By Formula Change?

Dec 6, 2011

Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.

My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.

Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.

how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?

View 5 Replies View Related

Worksheet Function: Change C2 To Change To Activecell Column + Row 2

Jun 23, 2006

How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.

=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)

View 4 Replies View Related

Excel 2007 :: Automatically Change The Worksheet Tab Names With Cell Value In Each Worksheet?

Feb 14, 2012

I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?

View 3 Replies View Related

Update Pivot Table On One Worksheet When Change Occurs On Another Worksheet

Jul 24, 2012

Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations

When a change occurs on PIR Tracker, the following occurs:

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))

[Code] .....

I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?

View 3 Replies View Related

Worksheet Change Event :: In A Column For A Reconcile Worksheet

Jan 10, 2009

looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?

Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub

View 9 Replies View Related

Calculate % Change Across 4 Columns When Only Some Columns Are Populated

Mar 24, 2014

This is a piece of a spreadsheet meant to track patient Range of Motion performance over a max of 4 weeks. How do I calculate % Improvement [write the formula for column J] to account for the fact that sometimes a patient is discharged after being seen 2 weeks OR 3 weeks or 4 weeks. I don't want to change the formula every time.

The SUMMARY % Improvement in J7 - will be changed to the average of each individual patient % Improvement from column J.

Looks like I need a dynamic range from what I can see from Googling. Do I need to use Offset ?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved