I have data like this....
6
4
5
2
.......in the first column A1:A4
I would like to add and remove data to the column so I have data that would look like this...
6
4
5
2
1
9
.......in the first column A1:A6
I would like to find the average on differing numbers of data without changing the formula. So how can I tell the software that my average has now changed from 4 data to 6?
I have a lot of data in column "G" & I need to only remove "<object height=" To "</object>"
See the attachment
I need to write a VBA code to remove the value of the cells in column B if the value in column A is empty. In my excel sheet, the user will paste hyperlinks in column B. If any link does not meet certain conditions, the cell in the same row in column A will be empty.
I want to have a change event so that after pasting links, it automatically deletes the links from the cells in column B if the cell in column A is empty
I need to remove the duplicates under column B for each item under column A and I can't seem to figure out how to do it.
I'm using Excel 2007; I would prefer a VBA solution, as I have to do this on a monthly basis. However, if a formula is the best way to go, then that's just fine. Either way, I'm preparing the data for a pivot table. I am unable to post the actual document in the interest of data protection.
Essentially, I'd like to turn this-
_ A B
1 Paris Bill
2 Paris Bill
3 Paris Mike
4 Paris Derek
5 Paris Derek
6 London Mike
7 London Bill
8 London Mike
9 London Bill
10 London Derek
11 Tokyo Derek
12 Tokyo Derek
13 Tokyo Derek
into this-
_ A B
1 Paris Bill
2 Paris Mike
3 Paris Derek
4 London Mike
5 London Bill
6 London Derek
7 Tokyo Derek
In other words, each city should have only one instance of any name that accompanies it; not all names will accompany each city.
My issue is that I have 1200+ addresses to make more readable - the first column is the street name, the second is the post code(s) relative to the street - what Ideally I'd like to achieve is one row per street, the street name followed by the post codes... i.e. take this...
A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG
Abbey SquareRG1 3BE
Abbey SquareRG1 3BQ
Abbey SquareRG1 3FB
Abbey StreetRG1 3AN
Abbey StreetRG1 3BA
Abbey StreetRG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP
Admirals CourtRG1 6SR
Admirals CourtRG1 6SS
Admirals CourtRG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL
to this...
A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG, RG1 3BE, RG1 3BQRG1 3FB
Abbey StreetRG1 3AN, RG1 3BA, RG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP, RG1 6SR, RG1 6SS, RG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL
I have a column with e mail addresses that all have > < this symbols in the beginning and at the end, how can I remove them from the column?
example
<Ana.Gomez@taca.com>
how can i remove duplictes from a colum. For example:
Column C:
A;B;C;A;D;E;A;G;B *(A is three times here and B two times!)
F;G;H;I;F*(F is here two times)
I would like to have the duplicates removed from each cell in column C so that each member is unique in the cell. The example would then look like:
Column C: (after removing the dupplicates A and B in first cell and F in second cell)
A;B;C;D;E;G
F;G;H;I
I have a formula in column B calculated from column A.
The formula for B is =SUM(A1)
I would like to remove column A while keeping the calculation for column B (I don't care about the formula, I just want to keep the numbers). Obviously, if I delete column A, then column B will show the #REF! error.
Is such a thing even possible?
I would like to remove duplicates in column D, but keep the first instant.
It was to look at column A for duplicates then look at column D and remove all but the first one.
Data
Column A Column D
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CH010 DUE FROM MANAGEMENT
CM03 SECURE MESSAGING
CM05 SECURE MESSAGING
NIM010 WEAS MODEL
XAP010 OPEN FINANCIAL
XAP010 OPEN FINANCIAL ........................
I am trying to reformat the following data: 10-10-14-1W5 needs to look like this 100101001401W500. The full description is actually 100/10-10-014-01W500 the desired result is without the slashes and dashes. I have tried to add a custom cell format of 00-00-000-00L000. but it will not apply to the existing data.
View 5 Replies View RelatedI have a column of data, (10,000 entries), a list of file names basically, e.g:
Mortality Project Executive Summary.pdf
RPP - AA rate and swaps.xls
Commodities.PPT presentation.ppt
Meeting Preparation 20090302.docx
Anywho the point is I want to remove the file extensions (and of course the "."s just before), but some obviously have 4 character extensions, some 3, some 2 etc... Some documents also have "."s in the file name that I do not want to remove, basically just working from the right keep removing until the first "." is removed.
So the final list wants to be:
Mortality Project Executive Summary
RPP - AA rate and swaps
Commodities.PPT presentation
Meeting Preparation 20090302
I know I should VBA it, but I want it all in the one spreadsheet and that's a bit above me. The document has about 30 other columns.
I know how to remove the first part of a text, but not the end. I have a very large amount of data in which the first column contains a product description and then the UPC code. I need to isolate the product name from the UPC code into 2 columns. I used =RIGHT(B2,14) to isolate the UPC, but since the length of the product name varies, I'm not sure how to isolate the product name. I have looked at using the TRIM and TRUNC functions without any luck. 'Text to columns' doesn't work because I have multiple spaces, 'Text to columns' would work if I could used 2 digits as the delimiter, but the function doesn't allow that.
Can someone please suggest a function or formula for this?
Here is an examples of how the text appears in the field. (Note: I only need to cut off the UPC code, I need the measure information to stay).
some really long product name 12 oz 5 bag 09-99999-99999
another shorter name 2 oz 09-99999-99998
I would like a loop that would run through the information in column A and if its duplicated delete the entire row… Also it needs to be able to handle 10 records to 10,000, it changes daily
View 3 Replies View RelatedI have a list with a column where all cells begins with the letter D. I would like to remove that D from all cells. For instance;
Dxxx1
Dxxx2
Dxxx3
Dxxx4
Should be;
xxx1
xxx2
xxx3
xxx4
I have excel data where it runs like below:
Lumina
006
Ali Rashid Al Amin
61.40
Date
03/04/2013
11/04/2013
14/04/2013
check
20
Raja
I need a result column containing as below but where the numbers are removed those cells has been
Lumina
Ali Rashid Al Amin
Date
check
Raja
How to remove unwanted space from each cell in a column.
View 3 Replies View Relatedhow to write code that would remove a leading zero (if there is a leading zero) from each cell in a column that looks like this:
05-15975
05-35473
07-45975
56-48993
56-49486
I know that using regular expressions would work but I don't know how to implement this. The column will always be column 'C' in my spreadsheets. I already have other code which is executed when I click a 'Process' button that relies on this column having no leading zeroes for it to work, hence I need to add in code that will make this change.
I have a column 'AE' that contains the html code for ecommerce item descriptions. While importing/exporting back and forth with another program and my spreadsheet, the following was added all throughout the descriptions.
%0d%0a
In some places, it may be three or four times consecutively
%0d%0a%0d%0a%0d%0a%0d%0a
Is there a macro script I could run to simply remove this any time it occurs in this column? It is just showing up as text and I am sure in another program it was representing something other than text, probably a space or hard return. Regardless, I don't need it.
See example below: ....
I have got a cell or cells with certain number of Characters (Alphabetical or Numeric or Alphanumeric). I would like to remove the excess Characters in the Cell from the end.
Example: If a cell contains 234 characters, Excess characters (More than 200) to be removed from the end.
Any formula or Vba program in generic form, so that i can limit the number of Characters to as required.
After copying certain data into an excel worksheet, all entries in a column begin at 2nd space of each cell which I don't want.
I can manually backspace each entry to the first space of each cell. But I cannot backspace all entries at once even if I try Find then put in a space for find and then in replace leave blank.
We have our system set up with 2 folders one with blank forms and the other with these forms filled out and completed (records), is their a trick to removing the data from a completed form fast with out removing tables and text used to make the forms questions? If I could do this it would save time from opening in the blank forms folder then saving in the records folder.
View 4 Replies View RelatedI have a workbook that has ben imported into excel and I need to extract the Cabinet sizes (red text) from ColumnC On Sheet2 leaving out the rest of the info. I have a button on the home sheet that has the code that I am running to generate this report it will do most of what I want but I am stuck at extracting the cabinet sizes.
The data is coming from the SheetComponetListing worksheet and going to Sheet2. I have manually created the end result that I am looking for on the CabinetSize worksheet. [URL]....
remove gaps for missing values in my column chart. I have tried to adjust series overlap and gap width, but the missing values are still showing as gaps. I have attached the sheet
View 1 Replies View RelatedI need to remove the first character in each row of a column, but only its first occurrence in each row. For instance:
Say, column 2 has following data (lots of rows, by the way):
First Text" - "blabla"
=SomeText2 = "blabla"
SomeText3 = "blabla"
=SomeText4 = "blabla"
-SomeText5 --- "blabla"
........
....
I would like to use the VBA code to remove ONLY the FIRST occurrence of the FIRST character specified (either "=" or "-") in each row in that column, so that I get:
First Text" - "blabla"
SomeText2 = "blabla"
SomeText3 = "blabla"
SomeText4 = "blabla"
SomeText5 --- "blabla"
......
...and so on...
I tried to use this:
Code:
Columns(2).Cells.Replace What:="-", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Columns(2).Cells.Replace What:="=", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
but it replaces ALL occurrences of "=" and "-" and that is not what I need.
I also tried this code:
Code:
With Range("B:B")
.Value = Replace(.Value, "=", "", 1, 1)
End With
But It doesn't work either.
I have a table with a filter applied. I don't want all of the column headers to be filtered because the data in those column is not suitable filter criteria. Is there anyway I can remove the individual arrows on the right hand side of the cells in question?
View 6 Replies View Relatedremoving duplicates from a the first column of a two column table while maintaining the data in the second column. Unfortunately my skills fall short and I have been unable to alter the code to work for a 5 column table.
For example, if I might have data that might look something similar to this: ....
I have a find and replace function that removes + smybols from a coloum of strings. How can I remove the first instance of a space (if it later contains a +, too?
E.g.
Before: [ +Test +Test]
After: [+Test +Test]
Code:
Columns("D:D").Select
Selection.Replace What:="+", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies View RelatedIs there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
I have to take a range of phone numbers that I have to port from another carrier and manually type them out or copy into another speadsheet, removing duplicate numbers. For example, I have the following numbers:
55532821055553282108
78132821235553282123
55532821625553282163
The results on the next spreadsheet need to be:
5553282105
5553282106
5553282107
5553282108
7813282123
5553282162
5553282163
I am looking for a way to automate this process.