I need to autofilter across several worksheets and have it look for the same information across all of them, so if I set the autofilter for the 1st spreadsheet, then how do I get Excel to autofilter the rest of the spreadsheets in the workbook or is that possible?
View 6 RepliesI have a single workbook with multiple worksheets all using Autofilter.
Is there a simple way i can turn off the autofilter in all worksheets in one go without referencing any particular worksheet?
I need to Autofilter across many sheets. I have found some examples on doing this such as..
Autofilter Across Multiple Sheets
But I need to take it a step further. Autofilter several Worksheets (skip blank ones - the above link gives code that bombs when it sees a Worksheet with out data.) Then copy those results to a 'summary' page.
So...
1. Autofilter all Worksheets / skip blank ones
2. Show results of all Worksheets on summary page.
I often have a table (sometimes formatted as a table, sometimes just data arranged like a table but not formatted as a table in Excel) where I'd like to create individual worksheets (eventually workbooks) based on the information in one of the columns. Take for instance the attached file. I'd like to create a macro to create worksheets (or preferably workbooks) based on data in the Region column. So workbook 1 would be something like North Region Sales 2014, and contain only the data for the North region. Workbook 2 would be something like South Region Sales 2014, and contain only the data for the South region, and so on. Sometimes I might need to create these based off the Region field, another time I might need to do it based off of the Salesperson.
Region Sales 2014.xlsx
To do this currently, I'd use the filter and unselect whichever data I want to keep and then delete all the remaining (visible) rows. When I unfilter, I'm only left with the data I want. This works, but it takes a long time when working with 50 or more "Regions" and large amounts of data.
i have the code below attached to a button and was wanting to know how (if possible) i could do the same thing but to all sheets so that i could have one button that removed all the autofilters in the work book ....
View 9 Replies View RelatedI have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
View 13 Replies View RelatedIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies View RelatedJust need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies View RelatedLet's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedHow do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
View 3 Replies View RelatedInstead of just counting all worksheets I want to count the number of worksheets between 2 control worksheets (Start and End). Reason for this is that I have a Workbook that grows weekly and each new worksheet is inserted after "Start". I have a macro that lists the Worksheet names but it grabs all and I only want those between Start and End.
View 9 Replies View RelatedI need to write VBA code to clear all Values, all values beginning with an = sign for eg = 9725, except formulas and text on all my worksheets, except the last 2 worksheets.
View 9 Replies View Relatedauto filter options in excel. For some reason it is only sorting up to row 140.
View 14 Replies View RelatedSay you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.
View 10 Replies View RelatedIs it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View RelatedI have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.
For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.
Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.
So far, no good luck..
The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?
i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.
Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?
I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.
I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedCode runs rather slow. Is there a better way to achieve the same results?
View 5 Replies View RelatedI have a workbook of approx. 60,000 rows, with about 20 columns including a source identity column, such as 'Leeds' , 'Barnet' etc..
What i need is a solution that will auto filter all rows that have a value of 'Leeds' in the source column into a new workbook called 'leeds.xls' for eg. and so on (for each unique source value) and loop until the whole data set has been filtered.
Saves manually filtering, copying and pasting....over and over.....
Im guessing the VBA needs to build / look at an array etc...
This macro was working just fine, now it generates an error on the line in red.
View 2 Replies View RelatedI have an spead sheet with 9 sheets 1 master and 8 sub sheets. The master sheet runs for col A to AV and the it can have x amount of rows. At the moment i use the following but this takes an age.
View 9 Replies View RelatedThe attached file has two sheets, “order” sheet and “stock” sheet. Can some help me with the followings:
1-In either sheet, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, the VBA performs an Auofilter of the cell I have selected.
2-In sheet “Orders”, I would like a VBA where if I put the mouse on a cell and then click the VBA button it takes me to sheet “stock” and performs a find function of the cell I choose in sheet “orders”. For examples, if I put the mouse on cell E21 in sheet “orders” and press the VBA button, it takes me to cell H297 in sheet “stock”.
3-In sheet “stock”, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, it takes me to sheet “orders” and performs an Auofilter of the cell I choose in sheet “stock”