I am trying to find the average of a cell with a name in that may appear several times in various columns. I then need to find the average of the value against that name in all the columns that it occurs in. Example:
a
b
c
d
e
f
g
h
i
j
k
Aldridge Sean
2
3
3
Andrew Rob
4
3
3
Aldridge Sean
3
2
2
[Code] .....
In the above example I want to find the average score for aldridge sean in column b, f and j.
I would like to find the weighted average of the values in the "score" column. Additionally, I would like to only find the weighted average if the student is jack and jane. I have attached my workbook for review.
View 6 Replies View RelatedI'd like to search for a specific value like (1) in an array of cells like (A:A). The result needs to be the average number of a different column (B:B) in the same row as the searched value (1). And the resulting number should be rounded up to the nearest 10.
Example below: (Find value = 1 in A:A) ... 1 is found 4 times.
A | B
1 | 295
3 | 123
1 | 400
5 | 425
1 | 354
1 | 400
In the example above there are 4 (1's) found. By adding all the values in column (B) of the same row, we get 295+400+354+400 = 1449, dividing that in 4, the average is 362.25, rounding that up to the nearest 10... THE RESULT I'M LOOKING FOR IS: 370
In my workbook almost all of the column include a RED cell.I want to delete the cells BELOW the RED cell in a column.;And also want to migrate the whole column which has not RED cell in a to new sheet.Here is what I need:
delete-the rows below red.xlsx
I am trying to write a VBA code in excel to delete any columns when a cell in that particular column = 0 (zero). That cell would start at B19 and subsequently follow to C19, D19 and so on.
View 9 Replies View RelatedI am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
in the attached excel file, in cell D21, i have tried to join my SumIF/CountIF formula together with my 2 date range vlookups.
the first vlookup is for the start of november and the 2nd vlookup is for the end of november.
in essence, i want to the average price of all 6160 printers sold in November 07 period.
i cant get the formula working, so any help would be much appreciated by me.
i am trying to complete a spreadsheet which most of it is done but one column i have i have to average everyother square in each column which i did but when i total those columns at the end i get the dreaded #div/01 which means any value that i dont have in a particular column it will not add is there anyway to fix this. i am attaching a sample of the spreadsheet so you can see exactly what i am trying to do .
View 6 Replies View RelatedLet's say I had the following data ...
47
50
50
50
44
50
46
50
Basically, I have 4 numbers, out of 50, as seen above...I want it so the last number (46 in this case) is special; what I mean by that is I want the following conditions to be met.
--If the special number is the lowest, just take the average of the four numbers, and divide it by 50
--If there is a (are) number(s) lower than the special number, then I want it to locate the smallest
---The smallest number should then be "replaced" by the special number (for calculations purposes only, not in the actual table)
So, in this case, since the special number (46) is not the lowest, excel would locate the lowest number (44), and calculate the average of 47, 50, 46, and 46 (the 44 was replaced by 46).
I would like to create an average function that will take an average of the Column labeled "Gap Time (Hours/Min/Sec)". I only want it to take the average for this for each new start date. These values will change daily so I was hoping that someone may help me write a function that will work when data changes instead of manually taking the average every time data is entered.
View 5 Replies View RelatedI have been asked at work to get some averages of data from an excel sheet. I have attached a sample workbook of the data i will be using. On Sheet1 is the data that will be looked at and on sheet2 is a sample of the results i need to achieve. I can get the data on sheet2 easy if i knew that data was static but in my case the data is going to be dynamic, so i don't know how many records each person is going to have each time if that person shows up in the record set at all. This rules out on static ranges to gather averages.
So far what i came up with is i use a macro to copy all the "Names" column to sheet 2 and then filter that data so that each name is unique, sort like a "key" for looking up values. Now i need to get averages of "Total Hours" worked in sheet 1 and display it in sheet 2 for each "Name". I have a formula worked out and almost have it where i want it but cant seem to get the range of data i need to be looking at. I need to get the Average Of hours Worked Per Person Where "Wk End Date" is greater than 1/1/2008 and the "name" matches up with the name in sheet 2.
I have two columns: 1) Last Date of each month from 2005 and 2) Value.
Date format: dd.mm.yy
For example:
31.01.05 1.7
28.02.05 -0.7
31.03.05 2.6
30.04.05 0.4
....
How can I find the average of second column of january months only? I tried countif, sumif and many others, but cannot find the solution.
I have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8
Average of test 2 = 39.9
Average of test 3 = 94.8
Average of dept using the averageifs is 41.3
Average of dept by taking the average of the values above is 58.8
Why is that discrepancy there?
I have a data base with 12 columns of data. I need it to look for one criteria in one row, match it, look for another criteria in another row, match that, and then once those criteria are met, average those rows that met the criteria with the statistics in that row that contains a value.
Such as:
Monica 2 Timed 310 Michele
Tom 3 UnTimed 410 TC
Art 5 Timed 216 TC
Monica 4 Timed 415 Michele
Tom 6 Timed 200 TC
Tom 4 Untimed 216 TC
Art 8 Timed 410 TC
What I need is the formula to search in through the data, look for Tom, then find all the ones that say UnTimed, and then average the number in column 2 that match those criteria.
I would like to average data between 0600 and 2200 hours, between two date ranges, such as July 1st and July 31st.
Capture.JPG
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
Find button in Spreadsheet. My problem is I wish to only search 2 of the columns on my sheet.
I have been trying to locate info on my own, see here: [URL]
But I cannot seem to find anything showing how to specify where to search.
Here is the code I am using
[Code] ......
Want to search columns G and J -OR- Search entire sheet but ignore Columns A and B ...
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View RelatedI have twelve columns of data nine of which are filled. I'm trying to come up with a formula that averages a column only if it has data in it, I have attached a sample file. As I add data the average should change without changing the formula.
View 2 Replies View RelatedI have data that I need averaged. The problem is that my data is taken into chunks of time, and I want to average each individual column after each break of time. My data looks like this: ...
View 6 Replies View RelatedLooking for an average formula.
All found formulas average within a string (ex. A1:F1).
My spreadsheet contains a series of three columns.
Example:
Column A reflects a number stat for a month (January).
Column B reflects another number stat for the same month (January)
Column C reflects the difference between Columns A & B.
Column D reflects a number stat for the next month (February)
Column E reflects another number stat for the same month (February)
Column F reflects the difference between Columns D & E.
and so on.
I would like to average the rows stats reflected in Column A, D, G, J, and so on.
Also, I would like to average the rows stats reflected in Column B, E, H, K, and so on.
Also, I would like to average the rows stats reflected in Column C, F, I, L, and so on.
I am calculating the average for a range of cells in a row. =AVERAGE(D7:P7). I need to hide some of the columns and calculate the average based only on the visible columns. How can I do that?
View 5 Replies View RelatedIs there a way to loop through a range of numbers, pick the first 24 columns, do some kind of caclulation for each column and row, the start again on column 25 for another 24 columns, perform the same calculation, go to the next set of 24 columns, etc?
I have tried using, for example, AVERAGE(OFFSET(range,0,0,24,24) and that correctly returns the average for the first 24 columns (range being the range of data I am using like D366:HK389). However, unless I manually change the starting column for the next set, it doesn't return the correct result. I have attached a sample data spreadsheet. There are 9 Locations in the spreadsheet where each Location contains a 24x24 matrix.
I have a pivot table showing actual and forecasted sales per month for diffrent regions/sales channels/segment.
I would like to calculate the average monthly sale, for forecasted and actual data, within the pivot instead of doing it outside in columns to the right of the pivot table.
I am trying to get the conditional average of 2 data columns.
data_1 category data_2 category
2.5 Yes 1.2 No
4.2 No 2.6 No
3.5 Yes 3.9 Yes
4.1 No 2.5 Yes
What I need is the average across the 2 data columns (data_1 and data_2) for category Yes and category No. I know I can use averageif to get the conditional average of 1 column, but that doesn't work with 2.
I would like to average a column based upon another column value. Namely, if one column is a duplicate, I would like to take the column to its right value and average all the duplicates. For example
comp 1409 99.7
comp 1409 99.5
comp 1409 100
comp 1308 65.7
comp 1509 99.5
I would like that to become
comp 1409 99.73
comp 1308 65.7
comp 1509 99.5
how to calculate a six month rolling average for hours in AD column and AE column, this average would be entered in to AF1. the date column is AC the date is not consecutive it does miss days out.
View 14 Replies View RelatedI am trying to determine the average reduction amount of appraised property values. I have two columns in my spreadsheet. Column H has appraised value of property. Column I has the accepted value of the property. Sometimes the accepted value is the same as the appraised value, sometimes it is reduced, and sometimes it is rejected.
I want to be able to find the average reduction amount when the accepted value is less than the appraised value and is not rejected.
Column H always shows a numerical value (i.e. $250,000), but Column I may have a numerical value or show "rejected".
I am trying to include numbers in an average if two separate columns prove true. For example, I want to include all numbers in column "C" in the average if the cell in column "A" matches a name and the cell in column "B" is equal to the number 1.
View 2 Replies View Related
