how would I calculate the number of hours in a shift after midnight. What I want to say is that the number of hours after midnight on a friday shift to be taken off from friday total hours and added to a saturday shift.
a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
I have time in the column C and its Description in column D. i want to calculate total number of hours from "9:26:00 PM" which is in C16 to "3:23:14 PM" which is in C1. from this total hours i want to deduct the time that agent was not available. for eg an Agent is not available from "3:23:14 PM" To "3:23:53 PM" then again from "3:26:57 PM" to "3:27:13 PM" Then again from "3:42:35 PM" to "3:44:10 PM" and so on.......thus i can find out the productivity time lost from the total time an agent was logged in. I have attached the Sheet so that it will be simpler to understand.
View 7 Replies View RelatedI would like to find out a way to work out the number of minutes worked during particular shifts for weekdays. Basically I have two columns, one for start time, and one for end time. They are formatted like dd/mm/yyyy hh:mm. So they have the date in there as well.
I would like a formula that would look at a range say A1-A11 and work out what shift it is and then output number of hours worked per shift. Day shift would start at 8am and finish 5pm, Twilight shift would start at 5pm and finish at 9:30pm, night shift would start at 9:30pm and finish at 8am the next day. So I would need it to check for example the start and end times (and dates) and then output 3 rows that show the total minutes worked.
There will be multiple days so it would need to say for example Monday Day, Twi, Night, Tuesday Day, Twi, Nights etc. Up to Friday Day shift because we don't work Friday Twilight or Nights, and we don't work Weekends.
Basically there is a list of jobs completed with Start Time and End Time for each and I also have a column that works out the number of minutes worked on that job. So the formula would need to look at many rows.
I would like to get formula which can show how many hours are after midnight from two times, example:
PHP Code:Â
clock in > clock out = hours after midnight
23:00Â ->Â 1:00Â =Â 1:00
01:15Â ->Â 4:15Â =Â 3:00Â
Please see this example: [URL] ......
calculating the number of calls logged in a shift, based on a 3 shift system in a day. shift 1 from 08h00 to 16h00, shift 2 16h00 to 24h00, and shift 3 00h00 to 08h00. each shift receives a number of calls based on the time the call was submitted.
View 2 Replies View RelatedI’m working on a timesheet and I need to separate the hours worked that are before 6 am from all the others. For example if someone works 1:00 am to 8:00 am I need a cell to populated with 5 representing the hours worked before 6 am. The formula below works fine except when the start time is 12:00 am. I am also having trouble if the start time is before midnight like in a 11pm to 5 am shift.
=(IF(AND(S3<=$AG$97,S3>=$AG$73),(($AG$97-S3))*24,0))
S3 is the start time
AG97 is 6:00 am
AG73 is 12:00 am
I would like to use vlookup to calculate the number of shift per week for each agent
View 10 Replies View RelatedHow can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
View 4 Replies View RelatedI have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
This is for a trucking company and I want to calculate how many hours an asset has been idol. I have the dates an times of use for each asset on a tracking sheet. Each row has a different instance on when the item has been utilized. I want another column to tell me how many house have elapsed between the current "time in" from the last time out.
I have attached a file with the column I would like to add to populate itself
Hours Idol.xlsx
I suspect it will be a match and index formula
Is there a way to calculate the number of hours between two times specified like this:
Start
End
Hours
Comments
Mon 6:00p
Mon 9:00p
3.00
Same day
[Code]..
I think I can write a UDF and that may be the easiest. Is there a straightforward way without a UDF?
I am creating a timesheet using excel 2003 users enter their shift start/finish time and a break start/finish time. Emplyee's can work night shifts (ie across midnight).
There are penalty rates which apply at different times. I need to be able to work out the amount of worked time that fits into a certain time period. eg. 10pm-7.30am, 7.30am-10pm.
I have a solution based on A clever formula from Daniel Maher that will calculate time within a period. But it doesn't work when the shift goes over two days.
I have attached a spreadsheet to help show the problem .......
I am trying to find a way to calculate the number of hours between date/times found in separate rows. The attached data set will help to envision what I am talking about.
For each couple of rows, I need to find a way to calculate the number of hours elapsed from row 1 to row 2. In the first example, to calculate the number of hours between 12/2/2009 8:56:51 and 12/4/2009 6:35:27.
i am trying to work with a formula that will look at date today (NOW) and compare this to a due date and in return provide me with only the working hours total. Working hours are 8am to 4pm (8 HOURS).If the due date is passed this will be a negative figure.
View 9 Replies View RelatedI have a worksheet where I capture the date and time of each new entry in column A.
In the next column, it's counting up the number of hours since that entry was made. However, it's including Saturdays and Sundays in this count and I was wondering if there's a formula to calculate the number of hours excluding Saturdays and Sundays? I know that network days would count the number of working days from one date to the next, but really need hours. Is this possible?
I have enclosed a sheet with the dilemma i currently face.
Ive tried multiple variations on a solution none of which have been 100% accurate.
Basically the work day is split into 3 shifts :
Days ( 06:00 - 14:00 )
Afters (14:00 - 22:00 )
Nights ( 22:00 - 06:00 )
I have a report which tells me the total time the colleague will be getting paid for and there
clock in and out times.
I need to determine which shift bracket there hours fall into based on the time bands.
Ie :
David worked 8 hours , started at 10:00 finished at 18:10 , so thats 4 hours recorded in days and 4 in afters since he worked across both shifts. the 10 minutes is not being paid so it doesn't need to be recorded.
the sheet should explain things better.
Weekly Timesheet.xlsx
This spreadsheet calculates hours worked great for first and second shift but when you enter times for third shift it goes all whacky with the outcome.
I'm trying to calculate the hours worked for both my day shift and my night shift.
Day shift (thanks to search ) I have managed to figure out and worked quite well.
=ROUND((E7-D7)*96,0)/4
It totals adds up the time and converts it into a decimal of hours worked.
For example Joes starts at 1100 and finishes at 1330 it returns a total of 2.5 hours worked.
However I strike a problem with nightshift.
They start in the late afternnon and work thoguh into the am.
I have used the same formula but it doesn't seem to work:
=ROUND((K7-L7)*96,0)/4
I assume because once the clock strikes 12 it's a new day and it can't work out the maths.
Lets use the example form about but make it pm.
Joe starts at 2300 and finishes at 0130 it should give me a total of 2.5 hours instead it gives me 21.5 hours
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
I want to find the hours worked in day shift and night shift. Day shift is from 06:30 to 18:30 and night shift is from 18:30 to 06:30. Listed below is an example of my date/times.
Note that the night shift carries over to the next day.
Start/Finish
21/12/09 07:00 to21/12/09 11:09
21/12/09 07:46 to21/12/09 14:41
21/12/09 12:13 to21/12/09 22:08
21/12/09 16:40 to21/12/09 18:05
21/12/09 19:40 to22/12/09 02:34
21/12/09 23:20 to22/12/09 04:39
22/12/09 02:06 to22/12/09 06:15
I'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx‎
find a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that?
For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).
Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
How to calculate the Hours
Check the attached file
I am designing a simple time card. Column D=time in, Column E=time out. My formula in column F to calculate total hours is =TEXT(E2-D2,"[h]hrs"). The result is not correct. Example: In at 9:30 out at 5:00 and the calculated total is -4 hours.
View 10 Replies View RelatedThis is for employee time sheet and schedule. I have multiple employees work a specific shift on various days. I need the calculate the hours worked each day and then have them totaled at the end of the period. Here is and example:
Employee Monday Tuesday Wednesday Thursday Friday Saturday Sunday Total Hours Total Cost
John Smith 10-5 12-6 9-2 5-10:30 3-8:30
How do I get it to calculate the difference in the same cell, convert it to hours, add up all the results and place it in the totals columns then calculate those totals by their pay rate to get my Labor cost?
I'm trying to create a work sheet with start and ending times with a 30 minute meal break, for the end of the week I would like to calculate those hours as a general number.
View 2 Replies View RelatedI would like to calculate the total hours between two dates using a unique formula and without inserting new columns. I have attached an example of the data I'm working with.
View 4 Replies View Related