I have time in the column C and its Description in column D. i want to calculate total number of hours from "9:26:00 PM" which is in C16 to "3:23:14 PM" which is in C1. from this total hours i want to deduct the time that agent was not available. for eg an Agent is not available from "3:23:14 PM" To "3:23:53 PM" then again from "3:26:57 PM" to "3:27:13 PM" Then again from "3:42:35 PM" to "3:44:10 PM" and so on.......thus i can find out the productivity time lost from the total time an agent was logged in. I have attached the Sheet so that it will be simpler to understand.
I need to find out the total movement in start times per week for the employees.
I have used MIN and MAX to find the earliest and latest start times, and then a subtraction to find the difference.
This works brilliantly until my employees who start around midnight.
If they have started before and after midnight, it takes midnight as the earliest time and 23:00 as the latest, giving a difference of 23 hours instead of 1 hour.
i.e.
Start Times 23:00, 23:15, 00:15, 00:30
Range of Movement 00:30 - 23:00 = 01:30
I've tried, =$B$9+($C$4>$B$9)-$C$4 but this does not work when the MIN reads 00:00.
I Have 20:00-04:00 as text in a cell, what i need is to take the 04:00 and show only if its after 00:00 and before 07:00 and show it as time value. This is where I'm up to so far but i don't know how to ask it for > 00:00 and < 07:00.
how would I calculate the number of hours in a shift after midnight. What I want to say is that the number of hours after midnight on a friday shift to be taken off from friday total hours and added to a saturday shift.
Adm Date Adm Time Trans Date Trans Time 1/16/2014 937 1/16/2014 1045 1/1/2014 121 1/1/2014 121 1/14/2014 800 1/11/2014 735 1/30/2014 100 1/30/2014 205 1/13/2014 800 1/12/2014 1202
I would like to calculate the difference (# hours spanned from the dates shown). Unfortunately when we transfer the data the COLON is dropped from MILITARY TIME so I am having problems in the calculation. This is also made more difficult as some of the calculates span over two dates.
I am trying to use conditional formatting for employee's shift hours. If they work between 22:00 to midnight they get 1.25 penalty rates. And if they work between Midnight to 7am they get 1.50 penalty.
I am basically trying to highlight cells a particular colour if an end time finishes between specific times as per below. This is so Managers can clearly see who is working at what penalties however I am having trouble as it runs through midnight.
This is the conditions I am after.
Between 22:15 to 00:00 = Highlighted Red Between 00:15 to 6:45 = Highlighted Yellow Between 7:00 to 22:00 = no formatting required
As per attached example, I can only get between 22:15 to 23:45 to work. Not sure if I am on the right track or completely off the mark!
Need to calculate the mean hours by the day of the week. We only want to know the mean if it occured after a certain time and if it was on the same date then that would be totalled for that particular week day. I have included a small sample of the file I am working on.
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55 In E1 will be the arrival time, 23:59 In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
I'm trying to calculate the available man hours I have for my shift/team. I have got the basic formula to deduct the time, and lost time for breaks ok, but when the shift end time crosses midnight the formula returns a "value" error message. i.e. start time = 18:00. End time = 24:00 breaks = 15 mins gives me a formula like this =TEXT(O17-N17-P17,"h:mm") and a result of 5:45
How I can make this formula work so it can calculate the variance even though the shift ends at 02:00am the following morning?
I’m working on a timesheet and I need to separate the hours worked that are before 6 am from all the others. For example if someone works 1:00 am to 8:00 am I need a cell to populated with 5 representing the hours worked before 6 am. The formula below works fine except when the start time is 12:00 am. I am also having trouble if the start time is before midnight like in a 11pm to 5 am shift.
I am creating a timesheet using excel 2003 users enter their shift start/finish time and a break start/finish time. Emplyee's can work night shifts (ie across midnight).
There are penalty rates which apply at different times. I need to be able to work out the amount of worked time that fits into a certain time period. eg. 10pm-7.30am, 7.30am-10pm.
I have a solution based on A clever formula from Daniel Maher that will calculate time within a period. But it doesn't work when the shift goes over two days.
I have attached a spreadsheet to help show the problem .......
In Cell A1 I have the date. In Cell B1 is the shift. There are three shifts labeled as 1, 2, and 3. Is it possible to create a rule that will convert 1 to 0700, 2 to 1500, and 3 to 2300? Below is an example of how I need the shifts converted to time (military).
Months Jan to Dec 09 are there and shifts are divided up to ABCDE. I need another sheet to return the value of the shift time i.e. 1330-2130, probably via a lookup?? In my second sheet I have the Day number, the month and the shift letter.
If I use =now() in a cell it will enter the current date and time. For shift workers, this does not work.
I'm tring to figure out a formula that will only change the date at 6:00am every day. This way a person working the night shift will not see a change in the date on his sheet at all, only the day worker.
I want the start and end times of the shift to turn black or red depending on whether the adjacent cell says "off" of "Hol" respectively. I have this working except for when I actually enter smething into these cell ie a shift, the cell turns black.
I want to find the hours worked in day shift and night shift. Day shift is from 06:30 to 18:30 and night shift is from 18:30 to 06:30. Listed below is an example of my date/times.
Note that the night shift carries over to the next day.
I am trying to calculate over time based on shift time.
For example: Regular shifts are between 7:00 AM to 3:00 PM (Monday thru Friday). Anything between those hours and on those days should be considered REGULAR TIME. Anything between 12:00 AM to 6:59 AM or between 3:01 PM to 11:59 PM should be calculated as OVERTIME.
Anything on Saturday or Sunday should be calculated as OVERTIME as well.
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column. For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double Dim shour As Integer Dim smin As Integer Dim ehour As Integer Dim emin As Integer Dim stod As String Dim etod As String pday = 8 pnight = 12 shour = Hour(st) smin = Minute(st) + shour * 60 If (shour >= 8 & shour < 20) Then stod = "day" Else stod = "night" End If ehour = Hour(en) emin = Minute(en) + ehour * 60 If (ehour >= 8 & ehour < 20) Then.................
Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that? For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).
Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
I have a workbook with 33 worksheets (31 date tabs and a Month To Date and Year To Date tab)
I want to have a clickable cell on each of the 1-31 date tabs to point to the MTD
I know I could do this easily with a hyperlink but I would rather have a clickable cell.
I have achieved this on an individual worksheet using the following code
Code: Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Not Intersect(Target, Range("$R$3")) Is Nothing Then Sheets("MTD").Select End Sub
My question is: Do I have to copy this to every single worksheets code or is there some way have all sheets read the same private sub? (I guess it negates the point of a "private sub")
Way to do this as it would make editing any changes easier than having to do it 31 times.
I'm having difficulty finding a way to ask excel to lookup a value based on an array spanning multiple rows and columns. There's a mock example in the attached.
I've tried to work around an issue so many different ways that I could easily ask a dozen questions about why something I tried couldn't work, but if I could just fix the original issue I wouldn't need the workarounds.
I think I need to query data using this format:
SELECT [Fields] FROM [DataSource] WHERE ( ((S.LabelDate>={d '2008-08-19'}) And (S.LabelTime>'0500')) And ((S.LabelDate
