Calculate The Solved/unsolved Issues Assigned To A Room Or To An Employee
Sep 25, 2008
location solved? issue employee room 1 ok issue 1 employee 1 room 2 issue 2 employee 2 room 3 issue 3 employee 2 room 4 ok issue 4 employee 1 room 5 ok issue 5 employee 1 room 6 issue 6 employee 1 room 7 ok issue 7 employee 2 unsolved issues room 1= solved issues room 1= unsolved issues employee 1= solved issues employee 1=
what formula could I use to calculate the solved/unsolved issues assigned to a room or to an employee? I use an autofilter on this date, so that I can only show unsolved issues.
View 2 Replies
ADVERTISEMENT
Apr 7, 2009
I am having a bit of a problem creating a formula for this report that I have to update every week. I need to be able to find the room nights and net room revenue values for the specific rate code in the "MATRIX" workbook.
On "CURRENT REPORT," I need D4 to pull up the value on "MATRIX" that equals "Room Nights" in column H and "CONABC" in column J. The same thing needs to happen for F4 but with "Net Room Revenue" in column H. The full report has about 500 of these codes in column J, and I need a formula that I can copy easily and will not be affected if codes are added or removed. This is super last minute - I need to finish this report by tomorrow morning, so take a look at the attachments.
View 2 Replies
View Related
Aug 1, 2014
I am using the following formula to calculate due dates based on the rank i assign an issue.
Note: a similar formula is used for the due date of section one, but if it is not complete, i do not want this formula to kick in a determine the due date for section 2. The formula itself is working fine, but is giving a 'due date' of 1/30/1900. I was wondering if there is a way to not display anything if it has no number to calculate from.
=IF(ISNUMBER(SEARCH("S",D11)),F11+30,IF(ISNUMBER(SEARCH("B",D11)),F11+30,
IF(ISNUMBER(SEARCH("A",D11)),F11+30,IF(ISNUMBER(SEARCH("QNM",D11)),F11+30,""))))
View 4 Replies
View Related
Apr 11, 2013
Just like if I put the employee's number and work time for each day,
The excel will accumulate the hours automatically somewhere in the sheet. (I don't want the total hour cover each day's work time)
Is there anyway I can do it?
View 5 Replies
View Related
May 15, 2009
I am working on a sheet that will allow a user to enter a start month (from a pre-defigned drop down list) and an end month (again from ddl). What I need to calculate is in what months the employee worked in so I can calculate their salary cost by quarter.
It can populate other cells in order to do the calculation if needed. So, for example if an employee started in May, and worked until December, I need to calculate that he worked 2 months in Q1, 3 months in Q2, 3 months in Q3, and 0 months in Q4. Our fiscal year is April to March.. ;-) I have thought of several options, but none of them have worked 100%.
View 2 Replies
View Related
Oct 16, 2009
I am trying to calculate the number of days since an employee worked. Column A has the date and columns B,C, and D show the name of the 3 employees who worked that day. Each row shows the next day in column A with the three employees who worked that day in columns B,C, and D. I need the format of the excel sheet to remain the same. I'm looking for a formula that will calculate the number of days since each employee has worked...there are 10 different employees and only 3 work each day.
View 19 Replies
View Related
Jun 18, 2009
Our office has a vacation days accrual policy based on number of years worked. We have a vacation days number, based on year of employment, the employee earns monthly. I need help with a worksheet, formulas, to document each employee, the year of employment they're in, # of days they have available based on the current month (which would need to add up automatically as the year progresses), then any days they request off, and finally a remaining balance of days left.
View 6 Replies
View Related
Jun 10, 2014
I have a little trouble with my macros. I wrote several different macros, each for a special purpose. Then I created some Buttons, which would make it easy for others to work with them.
But I have now experienced several times, that my buttons don't keep their assigned macro.
View 5 Replies
View Related
Dec 10, 2008
I am having problems changing my previous threads to SOLVED.
View 2 Replies
View Related
Jul 27, 2009
I am attempting without much luck to create a Room Booking system.
I am facing 2 issues:
So far when you enter the guest iformation onthe booking sheet it is copied to a worksheet which stores the booking information.
Then i need it to be copied to a worksheet called Required Gantt - I have attempted conditional formatting and Lookup formulas but i am having difficulty getting the booking displayed on the gantt sheet (blocking out the entire period that the guest will stay)
Also if a guest is leaving on 28/07/2009 and i have another guest arriving on the same date, i can't make a new booking as the old guest is still blocking the room, even though they have left. Is it possible to make it so at 12 noon, checkout time, i can book another person into that room?
View 9 Replies
View Related
Jul 19, 2014
I have a basic line chart. It was generated without a horizontal axis title, and very little room to add one. When I add one, the chart won't resize for it, and it bumps into the numbers on the axis. How do I get the chart to resize so this axis title fits in nicely. This has proven to be surprisingly difficult. Note also that a lot of options are greyed out that I try, and so far un-degreyable.
View 7 Replies
View Related
Jul 1, 2009
Please find it attached.
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
View 3 Replies
View Related
Jul 3, 2009
Following on from this thread: Create Room Reservation System
There are 3 problems that i've spent all morning trying to work out but can't:
1: I need to change back the layout of the Gantt chart (as it matches the paper system we have been using here, so it will be easy for the other volunteers to use it) - I did change it back and played with the conditional formatting and macro's but i can't get it too work like the version that AAE changed...
2: If I make a reservation ‘Booking’ is placed on the gantt chart, though only on the first date (I.E 22/09/09 – 25/09/09 – The first date is blocked but i can still double book the room via 23/09/09…) so I need the entire date range blocked out and I’m helpless at writing or even attempting to change VB Code…
3: Booking rooms and checking availability is great for single rooms, but I have realized that for dorms (upto 10 Beds) then once I book one person in, then I won’t be able to book the other 9 beds, which is a pain! Is there a way to have the room list but also a bed list for each room.
So for instance Dorm 1 has 4 beds – I book 1 person in it and it still appears as available until I book another 4 people in it, then it blocks me from booking someone else in the room?
View 4 Replies
View Related
Aug 3, 2008
I'm a student who doing a excel spreadsheet. I've stucked in this situation for long time, could any body point for me what i have to do.
1. I have to do a nest lookup, mean that when i look in a date (RoomBookingStatusList) and do a nest lookup in side to find the status of the room (RoomBookingStatusList). In short this help me to check that a room has not already been booked for the arrival date the customer wants (Clientbooking).
2. Next, if possible could anybody tell me how to alert the result. For example, it will turn red if the room is busy.
View 3 Replies
View Related
Aug 20, 2009
Is there any way someone can put the option of "SOLVED" on the post reply when you are the orginal poster.
Now you have to reply to the post then go back into your orginal post to mark it solved. they would be more willing to mark the thread solved. I have noticed many people get an answer and never respond or mark solved.
View 2 Replies
View Related
Aug 17, 2008
I want to a create a formula that reviews a series of start dates and end date, then sums the number of days (if the end and start date are withing a yearly period). i.e.
Column A = Room No
Column B = Start dates
Column C = End dates
Column A references a list of rooms (Room List)
If Column A = Room123
If start date is equal to or greater than 31/12/2007
If end date is less than or equal to 31/12/2008
Calculate the number of days used.
View 4 Replies
View Related
Mar 23, 2009
I am an IT Consultant and my client is doing a workstation refresh. They are a CPA firm. They use software called ProSystem Fx Engagement as a filing closet sort of thing. This has a toolbar Excel when work papers are opened from within the Engagement file room. In the Engagement toolbar there is an icon which allows the user to check all boxes. I have contacted the vendor and they said they know nothing about this and it is unsupported. I am trying to migrate to the user's new machine (helps save alot of time) but kinda stuck in a rut. I am assuming this maybe is a custom macro? I am not an Excel guy, I do server stuff etc... but trying to please my client, I included a screen shot of the toolbar and highlighted the button he would click to make this function work. This is Excel 2003 w/ SP4, and Windows XP Pro w/ SP3
View 5 Replies
View Related
Mar 21, 2014
I am trying to find a formula that populates a room number based on the number of hours used. I have a chart that is by building but multiple rooms within each.
Where I am having trouble is when there are more than one room with the same number of hours used then sometimes the formula populates the wrong room number.
Attached is my example spreadsheet of my chart. Book1.xlsx
I have shown what I need, what I have tried and a blank space to show where I need it to go.
View 3 Replies
View Related
Dec 10, 2007
When I Copy My Excel Document I Find This:
In My New Document The Custom Toolbar Is Likning The Functions (macros) To My Old Workbook In My Other ( The One I Copied From) Document.
Can I Make The File Path Of The Macros Change With The File Path Of The Document.
Or Embed The Macros To The Sheet
View 6 Replies
View Related
Apr 29, 2008
I created a name with the code
ActiveWorkbook.Names.Add "ChartNo", 0, True
I got an "error 428 object required"
with the next line :
[ChartNo] = 1
View 7 Replies
View Related
May 29, 2013
I was just trying to work around a problem with multiple UserForms in project. I have assigned Object variables oUserForm1 and oUserForm2 to represent UserForms of specific names.
VB:
Dim oUserForm1 As Object
Dim oUserForm2 As Object
Set oUserForm1 = VBA.UserForms.Add("Data" & CStr(X))
oUserForm1.Y = Y
[Code] .....
When oUserForm1 shows new data are inserted and another macro runs with a line to hide the opened UserForm.
In my project manager this user form name is i.e. Data1 (for x = 1), but the syntax Data1.Hide returns error. After that line it ask me to close the TOP most modal UserForm.
But When I use Me.Hide all works well.
My question is: Does VBA not see the name of the userform ("Data1") because I have used the oUserForm1 variable to give it a focus to it?
View 1 Replies
View Related
Nov 10, 2013
Lets say I have 20 cells. I want to randomly assign a label to the each cell from 5 choices, like "Blue", "Orange", "White", "Green", and "Black". But I want to assign a probability of selecting the labels. So the percent probability of choosing Blue would be 56% and White would be 23%, etc. . . is there a function that allows me to do this?
View 5 Replies
View Related
Aug 26, 2009
I have a formatting macro that I recorded, nothing fancy just bringing in a few different spreasheets, and formatting them. I made this for someone who really doesn't know excel.
I linked this button to the macro and it works great, except at the bottom of the code I would like to put something that when this has run, it hides the button, so it can't be run again.
View 4 Replies
View Related
Jan 6, 2005
I accidently assigned a macro to an object. When right-clicking on the object, I am only able to "Assign Macro...", how do I remove it?
View 6 Replies
View Related
Dec 10, 2013
What I'm trying to do is use a variable NumberOfRows (which is defined as an integer) in this following code, but the problem I get is that the NumberOfRows isn't being inserted.
Let's assume that NumberOfRows = 15.
What I would expect to be in cell B1 is =sum(H5:H15), but what is getting placed there is =sum(H5:HNumberOfRows) which of course doesn't give me anything. I'm sure this is an easy syntax thing, but I just can't seem to get the right combination.
Range("B1").Formula = "=Sum(H5:H&NumberOfRows)"
View 2 Replies
View Related
Jul 31, 2009
I am using Excel 2007.
I have a spreadsheet with about 30 items in 30 rows. I have a picture object which corresponds to the item # and other info in each row. When I sort the rows, the picture objects don't get sorted with the rows and end up no longer corresponding with the item # and other info.
I have right clicked and set the properties for each picture object to "move and size with cells". This does not prevent the problem.
View 9 Replies
View Related
Aug 7, 2014
I am making a system that warns me when the Monthly, Bimonthly, and Quarterly appointments are due based on calculating the "Last Serviced" date. The problem is that when I sort the data (usually by company name or by service type) it scrambles up the color coding and places the assigned conditional formatting rules in the wrong places. How can I keep the conditional formatting attached to their respective companies and row (and still be able to sort without scrambling).
I attached the file : Backup Database PUBLIC HELP FILE.xlsx‎
View 5 Replies
View Related
Aug 21, 2014
I have a list of product numbers and product prices (table 1).
I have a list of those (old) product numbers becoming new ones (table 2).
BUT some of those products have been merged together so multiple old product numbers have become one new one.
Now I have a list of the new product numbers and I want to calculate the price of the new product by adding up the price of the old products.
View 4 Replies
View Related
Feb 7, 2014
I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?
View 1 Replies
View Related
Sep 10, 2013
I am trying to average a range of data in column B, the values range from 0 up to 100. I want to average the data in column b for the lowest 5 people with a value higher than 0. I have searched the archives and the formulas i have tried give me a "False".
this is the formula I was using=IF(COUNTIF(B3:B22,"
View 4 Replies
View Related
