I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have a piece of code that basically performs a calculation and prints one value to a worksheet at the end. This code is part of a larger simulation model and by the end of the model this piece of code is executed thousands of times and thousands of values are printed to the worksheet. However, at the start of that piece of code there is an if statement which influences the end result. My question is, how to identify which end values were calculated using each method in the for loop.
For example would it be possible to highlight the cell (in which the value is printed) in red if the
VB: num= 0
Part of the if statement was used and highlight the cell (in which the value is printed) in green if the
VB: num= 1
Part of the if statement was used?
This would identify which values were calculated using each method.
VB: 'Change in Model set prior value If ws1.Range("D" & Rows.count).End(xlUp).Row < 2 Then num = 1 counter1 = counter1 + 1 sh1.Range("g3").Value = counter1
question 1 : In the below sheet, is there a way to use the condition highlighting the quantity for each item which has the lowest (prices/pcs) value?
for example : comparing the ITEM 1 -> $8/10 , $6/8, $9/20, $11/20 and highlight the 8pcs for item 1, indicates item 1, seller bill has the best offer.
Question 2 : Since I will have at least 50 items, is there a way to just copy the formula and apple to each row ?
question 3 : I would also like to apply a formula that can calculate the price and quantity of each item. for example : on the I column, for Item 1, i would love to order 3 orders, since bill has the best offer, so I will have 24pcs on column I3. And i would love to apply such formula to each item for each row.
Question 4 : For the cell J3, I would like to know if bill has the best offer for the item 1, order 3 orders, the price for item 1 will be $18. And I would like to apply such formula to each row for each item.
I do not want to create another column for each seller: such as ($/pcs) to find out the best offer, since i will have at least 35suppliers , and try to make the sheet look as nest as possible.
I run a small business, and I use Excel to track my books especially receivables.
I have a list of Invoice numbers and Invoice amounts for every customer.
My customers pay periodically (every two weeks, etc), but the tricky part is that the amount paid may not necessarily reflect the exact amount of invoice still being owed. And there may be two, three or five invoices outstanding at any one time.
I have another column which contains payment amount made by customer.
What I would like to do is to highlight the INVOICE NO. cell once the amount of that particular invoice has been bypassed by the total amount paid (i.e. the full amount of that invoice has been paid). Then I can close that invoice.
How to create a macro that would highlight a row that has the following condition :
In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"
I am trying to write a code which will highlight (say with Yellow Fill) those rows (Columns A:F) Where the ShipmentStatus = "Late" or where ShipmentValue is missing (i.e. blank). I have been able to get only as far as the code below and would appreciate your help in completing the Sub Highlight() ' This code will highlight those rows A:F in which the Shipment Status ' (Column D) = "Late" or the ShipmentValue (Column E) is blank
Dim MyRng As Range Dim StatusChk As String Dim RowCount As Integer ' Counter to count the # of rows Dim ColCount As Integer ' Counter to count the # of columns
I have a whole spreadsheet of data which looks confusing so I need to make it look more attractive to the viewer.
I have column A which shows a number of the branch conducting the transaction and the column will contain numerous different branches which I have sorted into branch order.I think there are too many branches to use the conditional formatting condition (probably 5000 different numbers)
What I wish to do is change the colour of the cell when the branch name changes.
For example Column A= Branch number 123 123 123 345 345 345 456 456 456 789 789
What I need is to highlight all branches 123 with a colour (any colour say red) but when the change in branch number occurs to 345 use a different colour to highlight all the branches (cells) with the number 345 (say grey).Then when the branch changes to 456 use the same colour that highlighted branch 123 (ie red) .Then again when the branch changes to 789 change the colour back to grey again so the spreadsheet shows rows highlighted when a different branch occurs
The above example would look like Column A all branches with 123 ( cell highlighted any colour but say red) branches 345 cells highlighted grey branches 456 cells highlighted red branches 789 grey
I want to know if there is any way to highlight a cell that does not contain a whole number. In my spreadsheet I have a formula that calculates the number of packages in an order, but if the result is not a whole number then I want it to be highlighted.
I have a workbook that I am working with and I need to formatting the cells so that they will have multiple formulas and I am not sure how to make it work.
Sheet1 Column A is titled 'accounts'. There are 2700 rows under Column A that are being used. Column A is already formatted with a Vlookup formula so I can't add another formula in these cells.
What I need to do is highlight many ranges of these 'accounts' cells depending on their account numbers. I need to input this formula in a separate location on the spreadsheet. For example; If 'accounts' is >=110031100000 AND <=110031100099 then highlight those accounts in 'RED'. and If 'accounts' is >=1200454000000 AND <=120045400099 then highlight those accounts in 'green' and so on...I am not sure how to word the if statement. The formula must reside in column D or greater and not in A.
Am I going about this the wrong way. What I am trying to do is isolate the cells (accounts) that I have referenced on another worksheet so that I can visually notice any accounts that may have been excluded.
do a conditional format rule that will highlight every other row of my excel spreadsheet when the value in a specific Column (say Column A) differs than the previous.
I've attached a sample worksheet with what I want it to look like after the conditional format rule is applied (every other row highlighted in light blue). The rule needs to apply to all rows in the worksheet beginning with ROW 2 (I don't need the rule to apply to the column header which is in ROW 1).
I set format condition in range by tool bar(=if formula is yes then display cell.interior.colorindex=3), but I have no idea how to find out (.address) the red colour cells are displayed in range with VBA?
i have set some cells with format condition, so when the value of it is true the entire cell should be gray "font,border,pattern". so the data will be invisible. so it dose that but when i print the font is back to black? which should be gray? i dont know why its doing that.
i tried this in other computers some of them work ok and most of them dont?? maybe its the printers? if so whats the solution?
I'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select() Set RNG = Rows(1) ' this is my problem LR = [A65536].End(xlUp).Row For R = 1 To LR If Cells(R, 1) = 1 Then Cells(R, 1).EntireRow.Select Set RNG = Union(RNG, Selection) End If Next RNG.Select Selection.Font.Bold = True Selection.Font.ColorIndex = 3 End Sub
I had in mind to use:
Set RNG = Rows(65536) but this will not make it a "neat" vba code, either.
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.