Excel 2010 :: Plotting Values V1 / V2 / V3 And V4 According To Given Date And Condition
Mar 25, 2014
Excel Version : MS Excel 2010
Attachment filename : <Forum to plot the values.xls>
My requirement is i want to plot the values V1, V2, V3 and V4 from the given condition (A1 / A2 / A3 / A4) and the given date.
If the given date is not available then the formula should take the older date than it not next date. For example if the given date is 10-Mar-14 and the date is not available for the given condition then it should take the older / earlier dates like 09-Mar-14 or 08-Mar-14 like and it should not take 11-Mar-14, 12-Mar-14.
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
We have arrival dates and departure dates for guests and would like to figure out the number of meals needed on a particular date.
Named ranges: NumGuests _ArrivalDate _DepartureDate _CheckInTime _CheckOutTime Need number of breakfasts Number of Lunches Number of Dinners for a given day of the week.
So if a guest is here say Jan 25 arriving after 9am, staying 2 nights they will have Lunch and Dinner on the 25th, BLD on the 26th and BL on the 27th. Since by default most arrive after 9 (miss breakfast), we can eliminate the checkin time for the breakfast calc and make the first one for the next day.
There might be other guests staying through that time period. The ******* would like to know how many meals they will need to prepare for the week.
I want the date input to be restricted a start date and an End date specified in two cells on the sheet. However, when I set up the Data Validation, ANY date will be accepted.
As an example cell Z1 contains the date 1/3/2014 and Cell Z2 contains the date 31/3/2014, so in the Data Validation box, the Start Date is referenced to Z1 and the End Date is referenced to cell Z2.
But I can enter 1/9/2020 and the Data Validation happily accepts that date.
I have a column of numbers that are already formatted as text. Some of the data is duplicate which is fine. It's like a list of 6000 numbers. I want to conditionally format the column so that I can fill the cell with a color as long as it stays the same number, but if it changes to a new number make it a different color. I don't need a lot of colors. Two is fine. TI have Excel 2010.
I am working on a schedule worksheet, the days are the columns and the staff member names go down the rows. I want to create a new cell value based on a condition on each row. I have been successful working with one row but how to efficiently do the same for each row.? I'm working with Excel 2010.
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
I have a spreadsheet where we will be inserting the Arabic Hijri date taken from a Customs document (bayan). On my spreadsheet I'd like to have a column immediately next to the Hijri date that would convert the Hijri date to the Gregorian date so both dates will be visible for our Arabic and Western personnel who will be using the spreadsheet.
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output A | B Z 1| 10 | a 10,a,b,c 2| 10 | b 11,a 3| 10 | c 12,a,b 4| 11 | a 5| 12 | a 6| 12 | b
I'm trying to make a scatter plot from two columns of data; the first, a series of decimals between 0 and 1, the second, a series of percentages between -40 and 140%. Essentially, I'm charting a performance (%) vs. a 'batting average' (decimal between 0 and 1).
However, when I plot these data points, the x-values the chart takes are, I suppose, the relative position of the data within the column (i.e., 5, 9, 32) as opposed to the actual values (.33, .71, .92, etc). I've tried manually selecting the data, copying only the values into different cells...nothing seems to work. Each time, I get points like (11, 61%) instead of the desired (.48, 61%).
Is there a way to plot a function, for example y = a + x*b or y = e^x in a graph without it having x and y values in cells of the spreadsheet?
That is, in y = a + x*b, for example, what I'd like to do is have an input cell for a and b, but no cells that show a value of y for every corresponding value of x , and a graph on a chart showing what the function looks like. Thus, the graph would only rely on inputs of a and b and on nothing else. A program called MathCAD does this, but I'm not sure how to do this in excel.
Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
I want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
I have attached Excel sheet as above. I wanted to plot graph time vs pic-zenith,pic-azimuth,pic-elevation .
I tried to plot graph but value of point in excel sheet is differ from table value. For single graph no problem,When all put together leading some problem. What kind of char can plotted above reading values.
I'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
When I combine 3 reports (which we get out of a system) into 1 big file, the date format remains the same (mm/dd/yyyy and right alligned). Same happens for most of my colleagues.
When 1 particular colleague goes and combine these reports, I've noticed that some of the dates are showing as text? (dd/mm/yyyy and left alligned).
I have a userform which requires the user to enter the date a training course was completed. Initially I used DatePicker as I was running Excel 2010 and had that working, however the workbook I am creating will be used on about a dozen machines, all of which have different versions of Excel. To avoid needing calendar Add-ins to be downloaded and installed for this feature I decided to go the vba created calendar route. I am using one I found on this forum: [URL] .....
It works well for me using the example spreadsheet provided in the post but I am having some difficulty incorporating it into my code. I believe I have imported the appropriate forms and modules because I can get the date populate to the Label Box on my userform but when I try to put the Date into the spreadsheet along with other data such as name and course duration, the name and course duration populate but the date cell remains blank and execution completes without error.
I have tried playing around with the data type thinking I had some issue using the .Value attribute with a String but .Text gives me an error as does converting from String to Number format.
I will attach the workbook but for a quick look, the portion of the code I believe that is not working is in here:
I have a fairly large database in excel 2010 that in being updated everyday by a employee. In column A there are a set of dates all in the same format 9/1/2011 what i would like to happen is that if there are any dates in column A then it cut out the row and paste it into Sheet1 (the data is stored in sheet2).
