I have a userform.listbox1 that is generated by entries made from another userform on a commandbutton1_click I want loop through the listbox, find the value on one sheet and copy/paste to another.
the code below is what i have come up with. I do not get any errors, it just doesn't copy/paste anything. Why sheet1 has over 5400 rows, sheet2 is blank
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I can't seem to find much online documentation for the 'Entirerow' property...
"Returns a Range object that represents the entire row (or rows) that contains the specified range. Read-only.
Example: This example sets the value of the first cell in the row that contains the active cell. The example must be run from a worksheet."
ActiveCell.EntireRow.Cells(1, 1).Value = 5
explain the difference (if there is any) between:
Rows(tmp).Delete
and
Rows(tmp).EntireRow.Delete
Within my loop I would like to delete an entire row - but as my loop goes down each row one by one as soon as one row is deleted the next row moves up and is then not included in the loop.
Dim Rng As Range, Last As Integer, Dn As Range
Sheets("ttool").Select
Last = Sheets("old ttool").Range("J" & Rows.Count).End(xlUp).Row
Set Rng = Range(Range("J2"), Range("J" & Rows.Count).End(xlUp))
For Each Dn In Rng
If Dn "" Then
Last = Last + 1
Sheets("old ttool").Rows(Last).Value = Dn.EntireRow.Value
Dn.EntireRow.Delete
End If
Next Dn
If I run it 4 times it completes as it should. Or if I change it to entirerow.clearcontents all rows are cleared.
why the code below errors out? Thanks...
Range(Cells(7, 1), Cells(WDIfinalrow, 1)).EntireRow.Delete
I have a spreadsheet with two tabs Line Crew and Master Log. I have a macro that searches the Master Log Column H for a value "Line Crew" and if it finds it, it will copy that row (Specified range) to the Line Crew tab. My problem with the macro is that it keeps copying the same row. I would like it to move down to the next row search for "Line Crew" , copy and paste until it gets to the end of Master Log Sheet. I have attached a sample of the spreadsheet. Here is my code:
[Code] ..........
Attached File : Book1.xlsm
[URL]
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
The same applies to the other tabs.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies View RelatedThis code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View 4 Replies View RelatedI have data on sheet-1 ("MEAL CHART") that I copy over to sheet-2 (Nutri_DB) daily. The macro below is working for me when I post the data the same day it is recorded. However, I frequently need to post my data the day before or day after it is recorded.
I would like to modify my code below so it copies/pastes the data based on the date in cell B1 (Named range "DATE") not the actual date (today()).
6 worksheets ("Monday" ,"Tuesday" etc)
1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
I would like a code which looks on the worksheet Racks and if Column A is "Y" then copy the entire row and paste it on the to sheet Summary Racks. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies View RelatedI have a spreadsheet that contains numerous ranges on different sheets with monthly data. The year begins with all formulas for forecasted data and as each month passes I need to copy/paste values in the current month column to reflect "actual" data vs. "forecasted". I would like to simplify this by using VBA, based on an inputbox ("current month") to find the month in each range and copy/paste values.
View 1 Replies View RelatedI have data in columns A and B.
If the data is in column A it will not be in column B.
My objective is to move the data in column A to column B, as long as it is not a number with the color yellow in the cell.
The data displays as follows:
**SPECIAL NOTE: Cells with 34407211756830 and 34407212013659 have yellow cells.
Column A Column B
34407211756830 000 Staples IV
RC 636
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
I have a spreadsheet with a number of sheets.
I need to extract a number of cells, based on the date of another cell and then past these values into a column on anther sheet.
Example: Sheet "Name1" in Column "G" is where I want the values to be pasted.
Sheet "Name2" has the dates in Column "B". I wish to extract the entries in Column "K" into Column "G" on Sheet "Name 1". I also have another Sheet, "Name 3" which has the the date field in column "B" and the entries I wish to extract in Column "K"and pasted in column "G" on the "Name 1"sheet.
The date range I'll be looking to past is by Month and year. The date fomat is dd/mm/yyyy.
I need to copy certain columns from one sheet to another sheet based on a formlua on the date.
So, on 'Master Sheet' I have a column called 'Date'.
I would like a formula, or macro, which does the following.
If date (column D) is over 2 weeks old (today's date - 14 days) then copy columns A, D, S and T to another work sheet called 'Not Attended' and paste them into columns A,B,C, and D.
Task:A user has to copy and paste a range of cells, if any row in column B has "PM" as a value.
I have several macros/VBS scripts that copy and paste from one workbook to another, how do I create a macro that says whatever row "PM" is in copy range F:BC on that row
My issues is the fact the PM can be in any row in column B in different sheets. Example.xlsx
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
I have two sheets that I am using. sheet 2 has a list of experiments in column C with information regarding the experiment in columns F - J. On sheet 1 I have a dropdown box with a list of all the experiments. When I select an experiment from the dropdown box I would like to populate columns K - O on sheet 1 with the information from columns F - J for the selected experiment on sheet 2.
View 9 Replies View RelatedI need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
I have created an action plan in Excel, with a column containing the values Yes, No and Partial to show prgress against the actions. I have used CountIF (in cells D72 to D74) to count the number of each Yes, No and Partial. I want to be able to put these figures in a chart each month. I am using columns F to Q for the chart data. the headings of the chart columns are month values, e.g, F1 is "6" (for June).
I have used Month(Now()) to generate the current month value in cell B1. I now need a macro that will check the value in B1 against the chart table headings in F1 to Q1 and if it finds a match, will copy the values D72 to D74 into the chart table below the relevant heading.
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
View 2 Replies View RelatedI enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies View RelatedOn sheet1 I have four listbox and when user select items in listbox then macro copy some range from sheet vj and paste them on Sheet1.
But I have to problems with this macro:
1. I want to copy range instead of row
2. How to change macro if I have two or more listbox.
Private Sub CommandButton1_Click()
Dim mpRow As Long
Dim i As Long