Submit Button To Transfer Data From One Spreadsheet Into Another?
Mar 13, 2013
I want a Macro that I would like to assign it to Control Button on Spreadsheet 1. When the user clicks on this Button only "Selected data" i.e. Cells A3, B4, C5, E5 will be transferred to Spreadsheet 2. The data transferred into Spreadsheet 2 should be inserted in the first available row and hence not override other data. Also, I have a question, both files will be sitting on the same shared network path however,for the update to happen to we need to have both files opened at the same time? If yes can we design something to update Spreadsheet 2 without having it opened?
View 2 Replies
ADVERTISEMENT
Mar 18, 2014
I would like to set up a maintenance register where I would have:
worksheet 1 - a page where staff can choose a location and choose a maintenance issue and hit submit
worksheet 2 - after they have hit submit the detail will appear in designated cells in worksheet 2 (a ledger of maintenance issues). so each submit should send the info to a new line in worksheet 2.
I have a basic knowledge of Excel and have used formulas and functions before but not VBA/Macros. Any step by step through setting up the submit button and macro correctly?
I've tried to do Worksheet("Register").Range("A2").Value = Worksheet("Request").Range("A1") after installing a push button but all I get is errors.
View 5 Replies
View Related
Jun 2, 2009
I have made a userform with some code in it that I would like to be on the spreadsheet itself instead of a user form? How is this done? The problem is getting the below code to work at spreadsheet level since I did not write the code below. I have the button the spreadsheet, but I don't know how to see the name of the button or assign the below command to the button.
I need a macro to copy data from the two combo boxes that appear on the spreadsheet and place the data into cell A for the first combo box and cell B for the second combo box.
View 4 Replies
View Related
Feb 10, 2014
I have a simple form built, but the data validation is only partially working. I've attached a sample workbook.
basically, when a user tries to put in a letter in the GP interaction field rather than a number, it prompts user to re-enter. This part is working, except when the submit button has been clicked, the field clears. the field clears, it prompts the user to re-enter.
form based input - Copy.xlsm
View 3 Replies
View Related
Apr 25, 2007
I'm working on an order form in excel and wondered if someone can tell me if it's possible to add a 'submit button' to a worksheet (order) that would do the following,
1.) print 3 copies (orders) of the current sheet
2.) create a new worksheet in the same workbook with a new order number (a specific cell in the worksheet) one higher than the current one. Also naming the new worksheet with the new order number.
3.) Save the current workbook.
Maybe I'm getting a little ahead of myself here but any help would be much appreciated as I'm really rusty at this...
View 9 Replies
View Related
Feb 15, 2009
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies
View Related
Jan 16, 2012
I have a spreadsheet called DATA1 that has code in 3 cells B2, D2, F2.
I want a peace of code that will allow me to transfer this data when I click a macro button (Lets call the button "transfer") to another spreadsheet call SALES1.
to do this it has to open the cell and place the data in the same cells on sheet1 of sales
View 8 Replies
View Related
Jun 28, 2012
I am trying to transfer data from two different spreadsheets where their data has common column titles and then transfer it to a Master spreadsheet. These two spreadsheets will have different filenames most of the time. If the first spreadsheet has a new data, then it needs to be transferred to master spreadsheet and when the other shpreadsheet has a new data, it will be added to the mast template as well. The problem is those two spreadsheets always change their filenames. How can I have a macro that will rely on the columns instead where data resides and transfer it to master template?
What I am trying to achieve is like two buckets with water (two spreadsheets wth some common columns) and their water will be transferred to a big water drum (master spreadsheet). For now, what I'm doing is always copy and paste data to the master spreadsheet and it takes me forever to do it one by one.
I don't know if I can attach my spreadsheets here so I only put the link for pictures [URL] ........
This is what I have:
Sub UpdateFromTable1And2()
Dim sFileName(1 To 2) As String ' List of file names
Dim nFile As Long ' Index for file name list
Dim wb As Workbook ' Opened workbook
Dim ws As Worksheet ' Worksheets("Combined") in this workbook
[Code] ..........
View 9 Replies
View Related
Jul 25, 2014
I'm transferring data from a PDF to Excel (the PDF link will be at the bottom of this post). Specifically, I need to get addresses from this document, so, three lines of text into four different cells. I don't need to include the state, but I do need to separate city and zipcode; see below for example.
The PDF is set up as a table, but when copying full pages of it into Excel, everything goes to one column. To complicate things further, the pages do not all follow an identical pattern.
Right now, I'm just manually copying and pasting each cell, but I trust the Excel gods (or demons) that there must be a more efficient way to do this.
This is the link to the PDF document: [URL]...
To give an example of what I'm doing, the first row of my spreadsheet reads as follows: Kroger Limited Partnership I d/b/a Kroger, 1617 Delaware Ave, Mccomb, 39648 (commas represent cell separation).
View 2 Replies
View Related
Sep 26, 2009
I have the following code that works just fine half of what I need it to do. The line that adds the text in column A functions correctly but the code for column B fails because column B is empty by default. The goal is to have the information in column B on the same row as column A. As well as adding two more cells on the same row as column A. The two new columns would be E and G and should be in the same row as the information from Column A. with formulas copied from e2 and g2.
View 3 Replies
View Related
Aug 5, 2009
I'm trying to transfer information I have held in a table format into a database format.
I'm using array variables to hold the table data and now I'm trying to use this data held within the array to produce a database.
For example:
A 1 2
B 2 3
C 3 4
into
A1
A2
B2
B3
C3
C4
My code would look like this:
View 9 Replies
View Related
Jan 13, 2009
I've got this macro I pulled from some other site and it's not working quite like it should. In my eyes at least...
OK, first, a little back story...
At work we used to have a custom Outlook form that was used for submitting office supply order requests.
The form was stored on our public drive for all to access it when needed.
Well, the form broke somehow and no one knows how to fix it.
We need something to replace it.
Keep in mind that we have no access to the Internet, nor can we send/receive emails outside of the company.
So, I created a simple form in Excel with a drop-down list of all the items in the supply cage, a form field for the senders name, etc...
What the macro does is, it copies the active worksheet the form that just got filled out) to a new workbook (dropdown data is on other sheets in the original) and then opens Outlook (2003) to send it as an attachment.
The only catch is that when the email arrives the only thing filled out is the form fields, NOT the drop downs...
The ONLY way I can get the drop downs to send with data in them is to leave the original open.
Oh, and for some reason every time I sent this while testing, it would name the attachment Book1, Book 2, Book3, and so on. I can't have that...
Here's the code I'm currently using:
View 9 Replies
View Related
Nov 23, 2013
I am new to excel macro. Want to invoke a page and click on submit button. Getting "Object doesnt support this property or method" error on the line "Subm.Click"
My code is,
Sub Macro1()
Dim IE As Object
Dim URL As String
Dim Subm As Object
URL = Range("B3")
[Code] .........
View 1 Replies
View Related
Jun 4, 2014
I am currently running VBA when ComboBox1 is selected ComboBox2 shows specific information based on lists in the spreadsheet.
Now I would like it if ComboBox2 showed "Business Improvement" then ComboBox3 will show information set in that list.
Also, my submit button isn't working and I can't find out what's wrong using the debugger
View 7 Replies
View Related
Mar 4, 2014
I have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
View 8 Replies
View Related
Nov 25, 2008
I have a spreadsheet that I have variable data in and I want to transfer specific parts of the workbook into a Word doc.
Not a problem with the Excel part, I can select each and every cell that I want, copy them and then...
Recording a macro hasn't done the trick as the code I have only copies and doesn't paste. I know I can edit the code to open Word but the problem is that when in Word, the data needs to go to very specific places, some of it goes in the header, most goes in the main body, I can't see how this could be done as there are no cell refs as in Excel!
is it possible to paste to say halfway in a sentence, in a macro?
View 9 Replies
View Related
Jun 9, 2014
sample pic.png
I have two spreadsheets of data I export regularly from an outside source. I want to consolidate the data from these two sheets into one large sheet with all the data in a more concise form bringing in only the data related to certain parts I am conducting analysis on. I have a list of these parts already. My first thought on how to do this would be to use the list in an entry for an input box and have that list be the index for a for loop in which i searched for a part code, copied the entire corresponding row, and pasted it back into the master sheet. I have gone through and tried to do this but I am running into problems because sometimes I have multiple rows of data that correspond to a single part number. I have attached a template of the way that the data should look in the master file with the multiple rows of details that correspond to just one part entry.
View 1 Replies
View Related
Mar 11, 2014
I am setting up a few spreadsheets for a restaurant I work at and I am stuck on an excel matter. I am trying to have an ordered number transfer to a new spreadsheet that will apply that ordered amount to a monetary value. So all my cooks would do is put the prep list on dropbox and it would take the ordered amount by the recipe cost to get an invoice for that day.
Example:
1st Sheet 2nd Sheet 3rd Sheet
Prep List: Recipe Costings: Daily Invoice:
Sausage - 2 x Batch Sausage - $229.03 $458.06
Pesto - 3 x Batch Pesto - $74.04 $222.12
View 3 Replies
View Related
Mar 12, 2008
Im trying to use the transferspreadsheet method to load some data in an access table, but using my current code, it gives me an error, saying that the file is already opened by another user, or that i need permission to view it.
that it is open, is true, since I'm loading from that spreadsheet.
this is the code I have now:
Sub LoadSheet()
Dim accappl As Access.Application
Dim strpathdb As String
Dim strpathxls As String
Dim myrange As Range
Set myrange = Range("a32").CurrentRegion
'path van de database
strpathdb = "X:credepSTRAT_PLANStratPlan.mdb"
'path van de upload file
strpathxls = ActiveWorkbook.FullName
Set accappl = New Access.Application
accappl.OpenCurrentDatabase strpathdb
DoCmd.TransferSpreadsheet acImport, 3, "Tbl_Growth_Metric", strpathxls, False, "myrange"
View 9 Replies
View Related
Aug 31, 2012
I am currently trying to run a macro that will take all of the values from one column in a workbook, copy and paste them in another sheet in the workbook. The data may vary in size and the macro must run until the preceding columns value (on the same row) is empty, which will signify that there are no more values to copy. Also this data may duplicate, which in this case I would only like to paste unique values.
View 1 Replies
View Related
May 26, 2014
I am trying to get data from this site in excel. I need to select options from drop down menu (like bank name, balance sheet and date).
View 5 Replies
View Related
Jul 23, 2014
I am imagining a spreadsheet with the equivalent of an info button in each cell of column A. The idea is the user clicks the button to open a User Form containing additional info about the entitity represented by values on that row.
E.g., Row 1 is labels, row 2 is all about Bob, 3 is about Jane, 4 is about Freddy. If the user clicks the info button on row 3 then a user form opens up and displays additonal info about Jane.
I am wondering if there is a way for VB to identify which row the clicked button was on without having to write individual code for each button telling VB which row the button was on.
I am hoping there is some form button property I can reference or interrogate which will give me a cell address; a button.position property or similar. This will obviously save me a lot of coding if VB can dynamically determine which row is being interrogated as there will be a couple of hundred of these to start with, potentially thousands. (I realise Access is a better solution for database interrogation, but I have to work with excel at present).
Ultimately, the user form that the button calls up will have a list box on it and I want the list box to default to the entity on that row, and allow the user to browse the other entities if they want to.
If there isn't a solution for this I will just have a single info button for the users to click that opens the user form and then they can select the entity from a list box. But I would like to offer the "intelligent display" option but don't relish coding the equivalent of several hundred "You clicked button four hundred and seventy six, default to info card for bert".
View 4 Replies
View Related
May 26, 2009
I need a macro for a command button to perform the following:
If B8 is the active cell and I click the command button,
transfer value from:
B3 to B8
D3 to D8
E3 to E8
F3 to F8
G3 to G8
H3 to H8
I3 to I8
Likewise, if B9 is the active cell and I click the command button,
transfer value from:
B3 to B9
D3 to D9
E3 to E9..........
View 9 Replies
View Related
Sep 26, 2012
I have created a simple userform that is linked to a button on sheet1. When the data in the userform is submitted, I set it up so it goes into a database under sheet2. The problem is, I don't want anyone modifying the entries in the database. Usually I would protect the sheet with a password, but when I do that, there is an error when the userform is submitted. The only thing I can think of is to hide sheet2, which doesn't seem like a great solution.
Is there any way to protect my database from being modified yet still allow the userform to be linked to it?
View 3 Replies
View Related
Mar 14, 2014
I am looking to create a form button in Excel 2010 that runs a .tto file. I have an add-in for Excel 2010 called "Transfer Data From Iseries" The .TTO file is a definition file of files, SQL, etc. What I need is a button on the screen (I do not want to try to explain to 1K users on how to add an add-in in Excel. When you click on the button it should open the transfer dialog box and then they put in a userid/password and it populates within that Excel file.
I tried to record a macro to get the script, but it does not record this information. I also tried to use Insert > Object in excel and it works, except that it does not open the data into that specific excel file (the one that you are in).
View 1 Replies
View Related
Sep 24, 2008
Using excel 2003. Cannot insert command button on a spreadsheet we have. Almost all icons in the control toolbox are unavailable when Im on this specific spreadsheet. Any new documents I open work fine. Is there some kind of protected spreadsheet that wouldnt allow for a button, picture, textbox label to be inserted???
I didnt make the original sheet but am just editing and improving it.
I would really appreciate any advice you could give, I have attempted to attach a jpg showing the greyed out icons in my controltool box
View 12 Replies
View Related
Jan 15, 2009
I'd like to create a button that makes the "Find and Replace" popup come up when pressed. How to do this? (Ctrl + F is the shortcut for it)
View 3 Replies
View Related
Jan 26, 2009
I have an excel sheet that has 3 command buttons on it, i am wanting to open a saved excel sheet that i have on my shared drive from the command button. I know the path of the saved file but how do i get the button to open this file?
As well as this i this i also have another command button what i want to open another sheet in the excel document with the command buttons.
View 5 Replies
View Related
Apr 29, 2009
I have a macro attached on Sample 01 that outputs a couple files after a certain date. The problem is the date that it choses is always "todays" date and I want to be able to change the date, the cell that I need to be able to change is cell c2. The problem is the rest of the formulas in the cells change to number format and don't stay in date format.
how to add code to a button. I think I've more or less solved my own problem with merging the data of two spreadsheets together (not as cleanly as I'd like of coarse), but the problem is the person I'm going to train to use this spreadsheet is not very computer savvy and this needs to be as easy as possible. So I want them to just be able to click 3 buttons and be done with the process.
View 4 Replies
View Related
Feb 23, 2007
I have built a Form which displays data from a spreadsheet. The user opens the form by clicking on a command button from the spreadsheet. The Form initially opens with the data from Row 4 of the spreadsheet (because this is the first row of the spreadsheet which contains the data for the form). The user can then sequentially access other rows in the spreadsheet by clicking on buttons in the Form which advance the extraction by one row.
I would like to add a command button to each row of the spreadsheet that would open up the Form and set the values in the Form to the same row which the command sits on.
View 5 Replies
View Related
