List Multiple Cells In Separate Worksheet
Mar 19, 2014
Is there a way to display multiple cells in a separate worksheet that are a part of multiple worksheets? Please see below.
Worksheet 1 has list of email addresses in column A
Worksheet 2 has list of email addresses in column A
How to have Worksheet 3 display email addresses in column A that were on Worksheet 1 and Worksheet 2? Considering all duplicates are removed from each worksheet.
Worksheet 1 (column A)
red
blue
green
yellow
[Code]....
Need to have Worksheet 3 display as: (column A)
red
blue
green
View 1 Replies
ADVERTISEMENT
Feb 7, 2014
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
View 1 Replies
View Related
Feb 27, 2014
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
View 6 Replies
View Related
Feb 14, 2013
I have a list of names in a Word doc that is set up like this:
John Doe
Jane Doe
Doug Birch
Mary Birch
Is there a way to copy that list and paste it into Excel and make each name go into its own cell.
Example:
A1 John doe
A2 Jane Doe
A3 Doug Birch
A4 Mary Birch
View 5 Replies
View Related
Mar 26, 2014
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
View 1 Replies
View Related
Jul 24, 2014
I am trying to force users to enter data in 5 separate cells in a worksheet. I have tried editing code I have found here, but just can't get it to work.
It is in the second sheet of the workbook and the sheet is called Invoice - the cells I want to force entry into (and the message I need) are as follows.
J2 - You must enter the salesperson's name
J4 - You must enter the customers name
J5 - You must enter the customer's address
J6 - You must enter the customer's postcode
L2 - You must enter the Invoice number
View 5 Replies
View Related
Jun 8, 2014
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
View 2 Replies
View Related
Jul 13, 2006
If this has been requested already, I apologize, please direct me to the right thread and flog me with USB cable. I've been searching the forum for an answer for a couple of hours now for the answer to this:
I have a list of words in column A on a sheet and I'm trying to write a formula on another sheet that will check all cells on a pre-populated row and return a value if any of the words from the list on are contained in any of the cells in the row. I've attached an example spreadsheet
View 3 Replies
View Related
Oct 13, 2009
I am trying to split a string into separate cells. I have managed to generate the formula for the description and first dlr value in the string but I am have trouble figuring out how to build functions for the rest of the string.
Example attached.
View 3 Replies
View Related
Sep 10, 2012
I have a sheet labled Parsed and a sheet labled Prices. The Data on the Parsed sheet is in W2:W1000. the data on the Parsed sheet, can have anywhere from one value to up to ten values in it. (again all sparated with a space.)
the data is separated by a space between each number value. I am trying to find a way to take the values from Parsed!W6 for example and separate the data into the prices sheet in to different columns. Some cells may be blank.
Example:
PARSED SHEET.
W
X
1
Equipment
[Code] .......
View 2 Replies
View Related
Nov 29, 2013
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
View 6 Replies
View Related
May 18, 2006
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
View 9 Replies
View Related
Sep 23, 2013
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
View 5 Replies
View Related
Dec 3, 2013
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies
View Related
Jun 24, 2009
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
View 8 Replies
View Related
Jan 21, 2013
I have a monitoring database and I want to create a 'source' sheet in sheet 1 whereby when I enter names into a certain column they rename different tabs/sheets in the worksheet. for example, the name 'Brown' inputted in cell 'A2' would rename sheet 2, Black in A3 would rename sheet 3 etc.
View 2 Replies
View Related
Feb 13, 2014
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
View 6 Replies
View Related
Nov 28, 2013
I wanted to create a multiple drop down lists (using data validation) in column B (50 in all, every 3rd line) whereby, multiple, comma deliminated, results would display in each of the cells - for use elsewhere in the spreadsheet.
I found some code (as follows) which worked perfectly for me
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
[Code].....
As I mentioned above, I don't really understand the code and all I know is that the line about halfway down "If Target.Column = 2 Then" is defining which column (B) this will work in.
The problem I am having is that I need to protect the worksheet and the moment I "protect" the worksheet, the functionality of displaying multiple values goes away and the drop-down list reverts to only displaying one of the available values.
View 9 Replies
View Related
Sep 22, 2009
I need a way to select an entry from something (a list box?) and have that info go to multiple cells on the worksheet. These cells are not in the same row or column. I currently use a list box that puts the selection into a row on the spreadsheet. Can I make it so that the entry has some columns from the listbox going to different places all over the sheet? Can that be done? I'm pretty good at researching the code, if someone will point me in the right direction. For clarification - an example: My list is like this:
Main St. School, 123 Main St, City, State, Zip, 986545, Cindy, 555-555-555, Location type: Inside. I need the school name and address starting on G5. Account number in I3. Cindy in cell B11 Then phone number in B12 and location type in B14. This list will be over 2000 locations.
View 4 Replies
View Related
Feb 18, 2014
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
View 1 Replies
View Related
Jul 2, 2005
Here's what I want to do:
I want either a combo or list box in cell "A2" to list one of several selections full names, i.e., "Compact Disc, Cassette, etc." When you select the full name it returns it's abbreviation, i.e. "CD, CAS, etc." in the same cell "A2," and also returns it's catalog number in B2 and the label in C2.
In this example CD and CAS are obviously short for Compact Disc and Cassette, but not all the codes are that obvious, which is why I require the translation.
I have a second worksheet titled "data" with an array of data that's particular to a given selection. The list of selections run down a column while the selections data runs across the rows.
View 9 Replies
View Related
Oct 9, 2008
=SUM(INDIRECT("'Sheet2'!$C$1:$C$5"),INDIRECT("'Sheet3'!$C$1:$C$5"))
These do not:
=SUM(INDIRECT({"'Sheet2'!$C$1:$C$5";"'Sheet3'!$C$1:$C$5"}))
=SUM(INDIRECT("'"&Sheets&"'!$C$1:$C$5"))
Where Sheets refers to =Sheet1!$A$1:$A$2
[A1=]Sheet1, [A2=]Sheet2
For the last two ONLY Sheet2 is summed, not sheet3
View 5 Replies
View Related
Jul 10, 2014
I have a challenge where in have a list of about 4000 rows and each cell have mutiple lines. ( i know there is a thread about this but that did not address my issue).
So my data is as follows - (I have attached teh sample file)
"Pari bom - GP and CFO 02547895452 pari@gmail.com
papa bom - GP and CFO 23365789541 papa@gmail.com
mama bom - CFO 2587412589 pari@gmail.com
nana bom - CFO 2587412589 nana@gmail.com
masi bom - CFO 2587412589 masi@gmail.com
"
I want to be in a position to seperte each line in exclusive rows and then seperate teh name, number and the email ... the later eing easier but cant get my head around seperating the cells.
View 4 Replies
View Related
Sep 7, 2009
I have a rather simple problem (tough for me!). I am setting up a food log. I would like to have one column with common food items that I have in a drop down list. The list would be about 20+ things. The other columns would have relevant nutritional info such as calories, fat, carbs, etc.
The problem is how do I make the values in the other columns change depending on which food item I pick from the drop down list?
For example, if I choose bread from the list, how would I get the columns for carbs and calories to change accordingly.
The IF function would be too hard because I couldn't nest 20+ IF functions in the formula for each cell. Also, the drop down list would change as my diet changes, possibly reaching 50+ things.
Also, I would like to manually enter a serving size that would alter the nutritional values in each column (for example 0.5*Calories or Carbs).
It seems so simple in my head, but I can't figure out how to get it to work.
View 6 Replies
View Related
Jul 18, 2002
I have a spreadsheet with 10 or more items that I would like to separate into their own worksheet. I'm thinking about a macro but I'm not sure about creating new worksheets in a macro.
View 9 Replies
View Related
Jul 5, 2014
The list is a crew list and I'd like to be able to select the foreman, but I'd like the crew cells to be populated with the information corresponding to that specific foreman. I've named the data range and created the drop down list but i cant figure out why the crew column wont populate with the crew. I am using a different sheet for my data.
I tried VBA but I am hoping I can use Index and Match.
=INDEX(crew, MATCH(C10, Personel!D2:F4, 0), COLUMN())
View 2 Replies
View Related
Jun 26, 2013
I am having a hard time searching for this formula.
Sheet1 has the following data in A1:A5
value1
value2
value3
value4
value5
I then have 5 additional sheets.
I want to populate cell D2 on each additional sheet with the values from Sheet1
Sheet2 - Value1 in "D2"
Sheet3 - Value2 in "d2"
and so on...
View 4 Replies
View Related
Apr 1, 2014
I've made a drop down list and when I select multiple cells and choose from the drop down list, it only fills one. Here's pictures:
So in that first picture, I've selected multiple cells. But when I drop down the menu and click my selection, this happens:
Why is it that all the cells I've selected does not fill with the option that I chose from the drop down. I highly doubt that I have to manually click all the ones I want to fill with what I choose from the drop down list.
View 1 Replies
View Related
Feb 17, 2009
If I choose 1 thing from a list I want it to then fill in many cells with info.
For example: I have a color list to choose from, once I make my choice cells near it fill in with 1.5lbs yellow, 2lbs blue, 4lbs red,.....or what ever I have established as the "recipe" for my color choice. When I choose a different color from my list these cells each fill in with different values.
View 9 Replies
View Related
Mar 17, 2014
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
[Code] ......
View 4 Replies
View Related
