Custom Data Entry Form To Post To Separate Worksheets Dependent On A Variable
Nov 25, 2009
I have a custom data entry form which is working fine. The form completes customer data for reviewing at a later date. I have now been asked to change it so it will seperate the data in to customer's who require some documents sent out and some that dont.
Is it possible to have a combobox on the form and if the options on the combobox are Yes and No (original), when either option is selected the data will complete on to a seperate sheet for cases with documents required or documents not required?
View 4 Replies
ADVERTISEMENT
May 27, 2014
User form data entry.
I need to save the data of For Eg. A form in Sheet 1, B form in Sheet 2, C form data entry in sheet 3.
what is happening now is that, all the entries are going in the Active Sheet that is open in the excel file. I want to automate the process of data entry, by making it enter data from specific form in specific sheet.
1st form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox12.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End With
End Sub
2nd form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet2.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox14.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End Sub
View 2 Replies
View Related
Jan 30, 2008
I am having trouble creating a custom data entry form in excel. What steps would I need to take..
Attached is a example of the data, the Headers are in bold, the highlighted columns are to be drop boxes.
View 11 Replies
View Related
Sep 30, 2009
I have built a data entry form (Input tab) and have code populating a table (Table tab). Currently both are in the same book, but I would like to house them in separately.
What is the proper VBA syntax for this? Will both books need to be open in order to populate the table?
The 'real' data is hosted on sharepoint and is getting darn big. The result is problems opening the doc and looong save times. My thought was to have the secretaries doing data entry open a single sheet (Input Form) which will then populate the data in another sheet. I'm dreaming, aren't I...
I know Access would solve everything, but for cost reasons I am stuck with Excel.
View 10 Replies
View Related
May 1, 2009
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies
View Related
May 18, 2009
I require a custom formula for in cell data validation of an 5 digit alphanumeric entry. The valid format is ANNNN (1 x alpha & 4 x numeric). Case of the aplha is not an issue.
View 3 Replies
View Related
Jul 30, 2013
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
[CODE]Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = TextBox1.Text
Cells(eRow, 2) = TextBox2.Text
Cells(eRow, 3) = TextBox6.Text
End Sub[CODE]
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Would 'Training.xls' need to be open?
View 2 Replies
View Related
Feb 6, 2009
I know this problem could be easily solved with the use of access. Unfortunatly I can only use excel. I am creating a uniform stock database. I a trying to create a user friendly face sheet, so that the operator does not have to have any knowledge of excel to use it. My question is to do with a data entry form. Sheet 2 of my spreadsheet has a list of all uniform in stock. At the moment it has two coloumns, "uniform type" and "uniform size". Is it possible to create a form on sheet 1 (the user interface) where a user could imput the type and size of an article of uniform that had just come in, and have it automatically added ot sheet 2?
View 4 Replies
View Related
Apr 12, 2006
I am trying to figure out how to enter and edit data using a form for stock traceability.
I have created the form with the headings etc and everything works well at data entry.
However, I am trying to create a search and edit form that searches and edits existing entries.
A third form displays the data in form format when the user types in the appropriate ID.
View 9 Replies
View Related
Oct 10, 2007
i have some data and i want search a record by two fields ("hsc and section") with in my data and i want to edit the remaining fields.
the fields of record are "hsc, section, amt, bcrc, date, prno"
View 6 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Jan 21, 2010
I'm wanting to create a simple form type interface for the viewing and changing of data one record at a time. What I'd like is on sheet one, and simple portait form to display
First Name
Surname
House Name
Address Line 1
Address Line 2
Town
County
on sheet two each column will be one of the above fields and each row will be a new record. Is there a way to do this in excel? Im trying to create a simple user experience that hide the rows & colums.
View 2 Replies
View Related
Apr 12, 2012
I'm making a data entry form for a user, and one of the fields is in a time format (mm:ss). Is there any way that I can validate that field in "cmdOK_Click()" so that when the user clicks "ok" on the data entry form, if they haven't entered a date a msgbox comes up.
I tried IsNumeric with an If function but to no prevail.
View 4 Replies
View Related
May 8, 2009
Have a small data base with customer details and comments. I would like a form to sit over that so that people on phones can enter customer # and check info and add further comments etc. for a specific customer. Before I try and design a form is there any templates for this type of thing. Have done a Google and Ozgrid search, but I maybe asking the incorrect names for the procedure.
View 2 Replies
View Related
Jun 28, 2007
Basically at the moment our static data group use a generic sheet which lists all possible field variables. However, what I want to do is design something which only shows the fields that need to be filled out (ie if the field is shown it needs to be input).
Once the form is filled out it will get saved and sent via email, where it is then printed out and input by our data group. One way I thought about approaching this was to have 18 sheets which are hidden, and which are then selected when a report type is filled out. The other way would be to have IF statements but I think that would get complicated on the one sheet. Just really looking at ideas at this stage.... For example there are 30 fields on the sheet that we use now, but some reports may only need 5 of these fields - I therefore need to "hide" the remaining 25...
View 6 Replies
View Related
Jun 28, 2007
I making a data entry form that sereval employees will be using. But what I need is data quality protection. My idea is to have a userform with a combo box. The employees would select there name from the combo box and then enter there personal password to get access to the data entry information, which will appear if the password is correct but kept hidden if password is incorrect. I have a example.xls without any code contain in it.
View 2 Replies
View Related
Apr 8, 2008
I currently have a spreadsheet that has a total of 20 workbooks in all. Each workbook contains between 5 and 100 rows and between 20-40 columns. Each column is a different category that I have data on for that particular tool manufacturer. What I want to do is create a front workbook where I can do all my searching. I would like the user to impute data into a search cell, hit a macro button, and have the full row that data was in be shown to them. Depending on which criteria they search for, the value may be found at the start, middle or end of the row.
Also, like I said the number of columns differs between each workbook. I would also like it to print out the categories for that workbook so that the person inputing the data knows what all the different numbers are when they come up.
Each workbook is a different tool manufacturer that my company has a tool from so there should never be duplicate data. The problem is that after I finish the spreadsheet, I am turning it over to the floor workers and they will have the ability to add/change any information in any workbook. If a mistake is made and different workbooks have the same data, I would like it to print out the category and data from the first workbook, then print the category and data from the next workbook and so on. The Category headers make up the first 2 rows of each sheet.
View 4 Replies
View Related
Jun 17, 2014
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
View 5 Replies
View Related
Oct 30, 2010
I have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
View 9 Replies
View Related
Jan 14, 2008
I have a spreadsheet of ~5000 rows of data that I would like to separate based on the product code column (11 product codes - 43,301,304,313,332,334,979,984,985,986,992). As it stands, I've been copying the sheets, then removing the data by filter, but doing this every week seems to be a waste of time.
View 9 Replies
View Related
Oct 10, 2007
I have a data sheet of 190,000 lines. It is a telecommunications bill with has approx 15 columns.
I need to separate the spreed sheet into the respective "call types" and put this data onto separate tabs, at the moment I do it all manually with Excel 2007.
Is there a way of automating this separation of data
View 9 Replies
View Related
May 22, 2014
I need to split the data into worksheets (see attached) by the Advertiser column and then by the deal year and deal code columns. I need each worksheet to be named per advertiser and deal year_deal code. I took off and replaced the data since it is sensitive information.
creating a macro or implicating one into the workbook to run for future reporting.
View 13 Replies
View Related
Apr 11, 2012
I am looking to split data in a worksheet into separate sheets based on Column C which contains Either Babycare or Homecare or Industrial or Professional. Eventually there maybe more names. If possible I would also like to name each sheet.
My VBA skills is limited to this particular task.
View 2 Replies
View Related
Jul 3, 2012
I am trying to combine data from two separate worksheets onto one so it can be sorted for printing. Using the macro recorder, and the search function on the forum, I managed to ham-fist my way through most of it - except for one issue.
How can I have Excel/VBA go to the first open cell in column A before it pastes the 2nd batch of information? I get an "object required" error with the MyRange variable.
Code:
Sub UpdateSortedTab()
Dim MyRange As Variant
' Removes Old Information
Sheets("Sorted").Select
Columns("A:E").Select
Selection.Delete Shift:=xlToLeft
' Copies Bench Stock Information
[Code] ........
View 5 Replies
View Related
Sep 27, 2011
I am relatively new to Excel. I have figured out how to use named ranges as lists and use INDIRECT Data Validation to have a list's selection made in one cell populate a new list in an adjacent cell.
A1 contains a list of "Characters" (The choices are "Numbers", "Letters", or "Other")
Based on the choice in A1, B1 has to populate with the following:
- A list of available Numbers to chose from (1,2,3..etc)
- A list of available Letters to chose from ( A,B,C...etc)
- Text that instructs the user to enter text into the cell manually
(For example, their "Other" character might be something like "@#$%^&*!". (Not unlike my mental state trying to figure out this problem.) I want them to see the instruction to "ENTER CHARACTERS HERE" and then be able to type in the cell.
So I need B1 to either populate with a menu that is dependent on the menu selection in A1, or allow for free text entry depending on if they chose the "other" option in A1.
View 4 Replies
View Related
Mar 14, 2009
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
View 6 Replies
View Related
Jun 21, 2009
Im trying to loasd a pic of a userform using cell A1 as the referance for the file though i am going wrong somewhere.
View 13 Replies
View Related
May 25, 2009
What I have is a table with over 20 columns that I use to sort and AutoFilter the 200+ rows of data. Several of the columns use Data Validation which require data to be from lists.
So, my problem occurs when I add a new row of data... I don't want all the values in the row to be blank (Some values should never be blank... This is why Data Validation was used here). Is there any kind of New Entry feature or some easier way to enter a new row of data? I know some other Office applications that use an easy UI to 'fill in' data types when a new entry is added.
At the very least, since it might be the only plausible result, I'd like a new row of data to result to default values (i.e. the top value in the list) in the columns that have data validation since should not be accepting blank values.
Also, I am very good with formulas and finding my way around Excel's features, but I'm not very experienced with the VBA programming or custom macro-writing.
View 12 Replies
View Related
Aug 9, 2007
I've developed a code to load csv files in excel and do some formatting on it. In addition I want to add a few cells which calculate making use of the data in the file. The data tabel (resulting after the csv import) always has the same number of columns, but the number of rows varies depending on the imported file.
My problem now is that I need to change the formula for my calculation depending on this number of rows.
This is what I got so far (not including the csv import):
Option Explicit
Dim varRow As Double
Function fctCountNrRows() As Double
Range("A1").End(xlDown).Select
varRow = Selection.Row
End Function
Sub subAddTotals()
fctCountNrRows
Cells(varRow + 2, 1).Select ..............
View 9 Replies
View Related
Mar 24, 2009
I have a date in H34, 21/03/2009.
In I34 I have the same date again, except formatted as MMMM YYYY so its showing "March 2009".
In G10, I want the cell to read: Number at end of March 2009, with the month and year being taken from the date range. To be honest, I can get the year okay using the Year() function but cant get the month as cant convert it back from a numeric.
View 9 Replies
View Related
