I'm attempting to use the countif formula to make sure a number is entered only once in 4 nonconnected ranges, I492:I496, I499:I503, K492:K496 and K499:K503. I've tried everything I know and as I'm self taught and my teacher is an idiot, I'm not having any luck.
View 14 RepliesI have 2 ranges with values, and I want to use countif to see of there's a same value in each of these ranges.
Countif: Is there a way to have a single criteria (a persons name) and multiple ranges example: a6:a10 c6:c10 and recieve the sum of that criteria and ranges?? I know there is I just cant get it.
I need to count a persons name entered in multiple ranges (cells or areas) on the same worksheet. I cannot make one big range because i will need to do the same for the b6:b10 but for a different "need" the a colum and c colum bieng "completed" the b colum bieng "not completed". I have tried =countif(a6:a10 + c6:c10, cell_with _persons_name) and for obvious reasons that wont work,
Is there a more efficient way to collect information from multiple ranges than using the COUNTIF and adding them together, such as
COUNTIF(Range,Criteria)+COUNTIF(Range,Criteria)+COUNTIF(Range,Criteria), etc?
I know my way around Excel, but I really do not understand much about VBA
I am using a work sheet where I want to count if Column A has one criteria and column B has another
example
column B states is used to track contracts it can be vendor
column L tracks status it can be open, received, or closed
I want to count the cell if the vendor name matches and the status is open
also if that is possible is the same possible with 3 ranges and criterias?
i had some formula provided by this site which seemed to work but is now resulting in #N/A or a zero value - can you take a look?
=SUMPRODUCT(('Report X'!$J$6:$J$10000="2")*('Report X'!$E$6:$E$10000>TODAY()-30))
Report X contains 2 relevant columns... E contains the date created for each item, J contains the type of each item - in this case i wish to see how many items '2' there are in the last 30 days
Report X is a daily report copied into the same tab each day - so the data will change every day depending how long each item is still in the system
this formula does work in the example sheet i provided but not in the spreadsheet in which i need it to work!
i also have similar formulas to calculate how many items are present in between 30 and 60 days exist, and how many over 60 days - all return the value "0"
column E containing dates is in the format 01/10/2008 - changed using Ctrl F - replace to amend it from 01.10.2008
How to use COUNTIF when there are multiple criteria. For eg. I have 3 columns, and I want to count the # of employees in each row if all 3 criteria in columns C, D, and E hold true.
Does COUNTIFS not work with named ranges/dynamic ranges? Everytime I try, I get a #VALUE! error. These are my 2 dynamic ranges:
ResultsM=OFFSET([results_list.xls]Results!$M$4,0,0,COUNTA([results_list.xls]Results!$M:$M),1)
ResultsQ=OFFSET([results_list.xls]Results!$Q$4,0,0,COUNTA([results_list.xls]Results!$Q:$Q),1)
The formula is simply:
=COUNTIFS(ResultsQ,"GENDER",ResultsM,"MALE"
However, this does NOT work. it returns the #VALUE! error. However, odly enough, when I use column references, it works:
=COUNTIFS([results_list.xls]Results!Q:Q, "GENDER", [results_list.xls]Results!M:M, "MALE")
This makes me think that COUNTIFS just don't work with named references..
I'm creating a coversheet that shows the percentage of "yes" and "no" answers from several cells in other sheets of the book. My problem is that I'm trying to use a countif statement to do it, and the cells i'm counting aren't in a simple range. ex. A1:A10
In stead i'm trying to get something like:
=COUNTIF((Sheet2!A2,Sheet2!A10,Sheet2!A15),"yes")
I want excel to count the number of items in a range that I have named "Name" and I have another range that I have name "date" which contains (obviously) dates. The dates are in order. I want to count the number of items in "name" that are associated with the date in the "Date" range.
The problem is I want to count the names in a date range, which is todays date through to 30 days after. I have to days date already posted automatically in K1 [by the formula =TODAY()]
Essentially, count all the times "Bob" appears in the Range "Names" that appear in the next 30 days. My Brain hurts just trying to describe it
I have cells containing data within C15:C22
I also have cells containing data within E25:E32
Some of these cells have the value '5' in them.
I want to have a running total of all the cells in these two ranges that have a value of '5' in them.
I did this formula:
=COUNTIF($C$15:$C$22,"=5")
This works okay but unfortunately this only covers the first data range. How do I specify the other data range in this formula?
My problem is :
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Now in H column I want use this formula which I obtained from this forum
H2=SUMPRODUCT((G$2:G$7>G2)/COUNTIF(G$2:G$7,G$2:G$7&""))+1
To get the position of Students.
But the text value "fail" in the G2:G7 getting Position No. 1 and i've noticed the reason by using evaluate formula as well.
3. I got solution by changing "Fail" with 0 by creating column I and then column H put this formula ........
The following formula produces the desired result:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!B2:Z100"),"SK")
but replacing the range of cells with a dynamic named range returns #REF!:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!Data"),"SK")
where A8 is the date 01/01/07. I'm trying to count items within the range Jan!Data.
I'm not sure if I'm trying to do the impossible, or if I'm missing something.
I am having trouble writing a COUNTIF formula that will tell me how many times a particular month appears in a list of dates. January may appear 10 times, February may appear 43 times, March 102 times, etc. Instead of manually selecting the range for each month and using the count feature on the status bar, I need a formula that will count for me.
I tried:
COUNTIF(B:B,month(1))
COUNTIF(B:B,month=1)
as well as several other lame attempts, but kept getting a result of zero or an error.
I want to get students positions in a class like 1st, 2nd, 3rd, etc. There can be two 1st position and 2 2nd positions at a time .
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Then i made array formula in column H to get the position
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}
Some improvement to write fail & position
={IF(COUNTIF(B3:F3,">=60")5,"Fail",SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G3))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
And more work to get total marks & position and Fail at the same time......
={IF(COUNTIF(B2:F2,">=60")5,"Fail",SUM(B2:F2)&"-"&SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
Now I wounder that is there a way to do all calculations in column H without using column G
By replacing (if there is any method) G2, G3, G4 etc. with Sum(B2:F2); Sum(B3:F3);Sum(B4:F4) etc. in below formula
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}.....................
I am using Excel 2010. I have a spreadsheet where column A is for Quarter, column B is for Employee, and columns C-R are for Codes (Code1; Code2; Code3; etc. through Code15). One line might have no values in the codes columns, another might have values in only Code1, another might have values in Code1 and Code2, and another might have values in all 15 columns.
A B C D E F --> R
1 Qtr Emp Code01 Code02 Code03 Code04 --> to Code15
2 2012.1 Liz CER02 INS12 WKH15
3 2012.2 Jim PIN55 WKH12 WKH19 WKH23
4 2012.2 Jon
5 2012.2 Jim WKH15 WKH23
6 2012.2 Jon PIN55 WKH15 WKH12 CER08
The worksheet is named "ALLAUDITS" and the named ranges are as follows:
Quarter: =offset(allaudits!$A$1,0,0,counta(allaudits!$A:$A),1)
Employee: =offset(allaudits!$B$1,0,0,counta(allaudits!$B:$B),1)
CodeData: =offset(allaudits!$C$1,0,0,counta(allaudits!$C:$C),15)
On another worksheet I need to be able to count how many times WKH15 appears in the CodeData range within a certain Quarter. I tried
=countifs(Quarter,"2012.2",CodeData,"WKH15")
But that didn't work, and from what I can tell in Excel support, it's because the ranges are different sizes. I have over 6500 rows, so I'm trying to avoid having to name all 15 columns and then do a sumproduct on all of them, such as
=sumproduct((Quarter="2012.2")*((Code1="WKH15")+(Code2="WKH15")+.......)))
Calculation would take forever.
I could just create a pivot table based on the "allaudits" worksheet, but I can't figure out how to get the actual codes as the row headers (instead of Code1, Code2, Code3, etc.).
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View Relateddefinitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I have a simple database spread sheet and I need to count a column under certain conditions. In one column I have employee names that appear repeatedly, in another I have codes. I want to be able to count how many times the code appears next to the name.
For instance:
If b4:b65000 = Sam Douglas then I want to count how many times different codes appear in the adjacent cell.
Sam Douglas:BI
Sam Douglas:BI
Sam Douglas:SI
Sam Douglas:BI
BI = 3
SI = 1
I have following data (two columns Parent and Child), now I want to apply Countif on Child cell.
But in Countif I want to provide the criteria...let say only count those childs whoes parent is A.
How to do this in Excel.
Parent Child
A e
A f
B g
B h
B i
C j
C k
I'm reasonably new to Excel, and have a fairly basic question to check out:
I have been using the COUNTIF function to count up numbers of items in various categories in a column.
The formulae I have been using are like this:
=COUNTIF(F$3:F$201, "Red")
or where I've wanted to combine various comments
=SUM(COUNTIF(F$3:F$201,"Yellow")+COUNTIF(F$3:F$201,"Cream"))
I'm not sure what formulae to use to count up
1) the total number of entries in that column, so that I can make sure that I haven't missed some (without having to check manually!)
2) how to count up the values that do not match the other categories that I have specified in the COUNTIFs: this would be a value for finding how many 'other' entries there are in that column, without having to specify those values
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
important columns are: "D", "G", "L".
this is about a project is a granite to be installed in 104 units, these units are divided in 4 types (column "L") K1, K2, K3, K4
I tried IF, SUMIF, COUNTIF, ETC but I think that I need is some combined function that I'm not able to figure out.
as you can see in the attached file, my units 101, 102, etc is not been installed yet (column H is empty), but the units 209, 210, 211, 214 yes was installed on 5/6 for example.
for example, if i use =COUNTIF(H4:H20,">0"), will return me all the H that is not empty (=3), how many kitchen was installed so far, but, I would like to know how many of these returned units (3), is my different types: K1, K2, K3 and K4....
I am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
What i want to do is count but only if another cell meets a certain criteria,,
Let me explain better,,what i want to do is count the number of 'Completed' cases by each individual, i.e. count if the cell A1 = Completed and B1 = Kevin and the same for 'Pete'
I'm sure i need some sort of nested =IF AND formula but just can't think how the nesting should look.
B
CompletedKevin
CompletedPete
CompletedPete
Parked Kevin
SubmittedKevin
CompletedKevin
Started John
With AdviserPete
With AdviserPete
Started John
Started John
I have attached a copy of my spreadsheet .My formula is in column BA and I am trying to figure out which students have 5 A* - C. We are only allowed to add 2 vocational subjects to this formula so basically 3 (or More) GCSEs + 2 BTEC/OCR Nationals. Now my formula works pretty well except if the candidate has 4 GCSEs and 0 or 1 BTEC it is still calculating as though the candidate has achieved 5 A* - C.
I have highlighted GCSE Subj in pink and Vocational Subj in Puple.
I've been asked to extend the counting capabilities of my interface to pick up the profession of each person when they answer whatever is selected in the 'Interface' worksheet (cell B2) put them in my interface.
I've been trying various incarnations of SUMPRODUCT along with what DonkeyOte helped me with before, but currently no joy. Hope that makes sense - have a look at previous post for further details. I've attached an example to look at.