Is there a more efficient way to collect information from multiple ranges than using the COUNTIF and adding them together, such as
COUNTIF(Range,Criteria)+COUNTIF(Range,Criteria)+COUNTIF(Range,Criteria), etc?
I know my way around Excel, but I really do not understand much about VBA
I have 2 ranges with values, and I want to use countif to see of there's a same value in each of these ranges.
I'm attempting to use the countif formula to make sure a number is entered only once in 4 nonconnected ranges, I492:I496, I499:I503, K492:K496 and K499:K503. I've tried everything I know and as I'm self taught and my teacher is an idiot, I'm not having any luck.
View 14 Replies View RelatedCountif: Is there a way to have a single criteria (a persons name) and multiple ranges example: a6:a10 c6:c10 and recieve the sum of that criteria and ranges?? I know there is I just cant get it.
I need to count a persons name entered in multiple ranges (cells or areas) on the same worksheet. I cannot make one big range because i will need to do the same for the b6:b10 but for a different "need" the a colum and c colum bieng "completed" the b colum bieng "not completed". I have tried =countif(a6:a10 + c6:c10, cell_with _persons_name) and for obvious reasons that wont work,
I am using a work sheet where I want to count if Column A has one criteria and column B has another
example
column B states is used to track contracts it can be vendor
column L tracks status it can be open, received, or closed
I want to count the cell if the vendor name matches and the status is open
also if that is possible is the same possible with 3 ranges and criterias?
i had some formula provided by this site which seemed to work but is now resulting in #N/A or a zero value - can you take a look?
=SUMPRODUCT(('Report X'!$J$6:$J$10000="2")*('Report X'!$E$6:$E$10000>TODAY()-30))
Report X contains 2 relevant columns... E contains the date created for each item, J contains the type of each item - in this case i wish to see how many items '2' there are in the last 30 days
Report X is a daily report copied into the same tab each day - so the data will change every day depending how long each item is still in the system
this formula does work in the example sheet i provided but not in the spreadsheet in which i need it to work!
i also have similar formulas to calculate how many items are present in between 30 and 60 days exist, and how many over 60 days - all return the value "0"
column E containing dates is in the format 01/10/2008 - changed using Ctrl F - replace to amend it from 01.10.2008
How to use COUNTIF when there are multiple criteria. For eg. I have 3 columns, and I want to count the # of employees in each row if all 3 criteria in columns C, D, and E hold true.
Does COUNTIFS not work with named ranges/dynamic ranges? Everytime I try, I get a #VALUE! error. These are my 2 dynamic ranges:
ResultsM=OFFSET([results_list.xls]Results!$M$4,0,0,COUNTA([results_list.xls]Results!$M:$M),1)
ResultsQ=OFFSET([results_list.xls]Results!$Q$4,0,0,COUNTA([results_list.xls]Results!$Q:$Q),1)
The formula is simply:
=COUNTIFS(ResultsQ,"GENDER",ResultsM,"MALE"
However, this does NOT work. it returns the #VALUE! error. However, odly enough, when I use column references, it works:
=COUNTIFS([results_list.xls]Results!Q:Q, "GENDER", [results_list.xls]Results!M:M, "MALE")
This makes me think that COUNTIFS just don't work with named references..
I'm creating a coversheet that shows the percentage of "yes" and "no" answers from several cells in other sheets of the book. My problem is that I'm trying to use a countif statement to do it, and the cells i'm counting aren't in a simple range. ex. A1:A10
In stead i'm trying to get something like:
=COUNTIF((Sheet2!A2,Sheet2!A10,Sheet2!A15),"yes")
I want excel to count the number of items in a range that I have named "Name" and I have another range that I have name "date" which contains (obviously) dates. The dates are in order. I want to count the number of items in "name" that are associated with the date in the "Date" range.
The problem is I want to count the names in a date range, which is todays date through to 30 days after. I have to days date already posted automatically in K1 [by the formula =TODAY()]
Essentially, count all the times "Bob" appears in the Range "Names" that appear in the next 30 days. My Brain hurts just trying to describe it
I have cells containing data within C15:C22
I also have cells containing data within E25:E32
Some of these cells have the value '5' in them.
I want to have a running total of all the cells in these two ranges that have a value of '5' in them.
I did this formula:
=COUNTIF($C$15:$C$22,"=5")
This works okay but unfortunately this only covers the first data range. How do I specify the other data range in this formula?
I'm trying to get multiple seperate ranges selected but Excel interprets it as criteria even when I use Insert> Function. The problem probably comes from the use of commas in formulae. Example:
I want A1:E1 and A3:E3 and A5:E5 to be the range involved which leads me to construct:
= COUNTIF(A1:E1,A3:E3,A5:E5...
However, Excel interprets the 2nd and 3rd values after the commas to be criteria or something else.
My problem is :
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Now in H column I want use this formula which I obtained from this forum
H2=SUMPRODUCT((G$2:G$7>G2)/COUNTIF(G$2:G$7,G$2:G$7&""))+1
To get the position of Students.
But the text value "fail" in the G2:G7 getting Position No. 1 and i've noticed the reason by using evaluate formula as well.
3. I got solution by changing "Fail" with 0 by creating column I and then column H put this formula ........
The following formula produces the desired result:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!B2:Z100"),"SK")
but replacing the range of cells with a dynamic named range returns #REF!:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!Data"),"SK")
where A8 is the date 01/01/07. I'm trying to count items within the range Jan!Data.
I'm not sure if I'm trying to do the impossible, or if I'm missing something.
I am having trouble writing a COUNTIF formula that will tell me how many times a particular month appears in a list of dates. January may appear 10 times, February may appear 43 times, March 102 times, etc. Instead of manually selecting the range for each month and using the count feature on the status bar, I need a formula that will count for me.
I tried:
COUNTIF(B:B,month(1))
COUNTIF(B:B,month=1)
as well as several other lame attempts, but kept getting a result of zero or an error.
I want to get students positions in a class like 1st, 2nd, 3rd, etc. There can be two 1st position and 2 2nd positions at a time .
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Then i made array formula in column H to get the position
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}
Some improvement to write fail & position
={IF(COUNTIF(B3:F3,">=60")5,"Fail",SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G3))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
And more work to get total marks & position and Fail at the same time......
={IF(COUNTIF(B2:F2,">=60")5,"Fail",SUM(B2:F2)&"-"&SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
Now I wounder that is there a way to do all calculations in column H without using column G
By replacing (if there is any method) G2, G3, G4 etc. with Sum(B2:F2); Sum(B3:F3);Sum(B4:F4) etc. in below formula
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}.....................
I am using Excel 2010. I have a spreadsheet where column A is for Quarter, column B is for Employee, and columns C-R are for Codes (Code1; Code2; Code3; etc. through Code15). One line might have no values in the codes columns, another might have values in only Code1, another might have values in Code1 and Code2, and another might have values in all 15 columns.
A B C D E F --> R
1 Qtr Emp Code01 Code02 Code03 Code04 --> to Code15
2 2012.1 Liz CER02 INS12 WKH15
3 2012.2 Jim PIN55 WKH12 WKH19 WKH23
4 2012.2 Jon
5 2012.2 Jim WKH15 WKH23
6 2012.2 Jon PIN55 WKH15 WKH12 CER08
The worksheet is named "ALLAUDITS" and the named ranges are as follows:
Quarter: =offset(allaudits!$A$1,0,0,counta(allaudits!$A:$A),1)
Employee: =offset(allaudits!$B$1,0,0,counta(allaudits!$B:$B),1)
CodeData: =offset(allaudits!$C$1,0,0,counta(allaudits!$C:$C),15)
On another worksheet I need to be able to count how many times WKH15 appears in the CodeData range within a certain Quarter. I tried
=countifs(Quarter,"2012.2",CodeData,"WKH15")
But that didn't work, and from what I can tell in Excel support, it's because the ranges are different sizes. I have over 6500 rows, so I'm trying to avoid having to name all 15 columns and then do a sumproduct on all of them, such as
=sumproduct((Quarter="2012.2")*((Code1="WKH15")+(Code2="WKH15")+.......)))
Calculation would take forever.
I could just create a pivot table based on the "allaudits" worksheet, but I can't figure out how to get the actual codes as the row headers (instead of Code1, Code2, Code3, etc.).
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedI receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
I have a giant data sheet. I have to cherry pick certain data out of the list and send it to certain associates, in a new spreadsheet.
I want to do this automatically.
I can create the macro to select the data I want, and copy it over (values only), but I cannot find out how to do it in a new sheet with a new name that automatically gets generated with a unique filename (probably using the date).
Essentially, I want to copy my data spreadsheet (post-filter) into a new spreadsheet titled X mm-dd (where X is whatever I pick). I then want to delete several rows from it.
Ideally, the macro would do this (I will put a * next to things I can handle the code for, to save work):Filter Data *
Copy Data *
Create a New Spreadsheet named (Person's Name) mm-dd.xls
Paste Data (values, formats, column widths) to the new spreadsheet *
Delete Several Columns from the new spreadsheet *
Rename the sheet it's been pasted to
Re-filter data (new filter) *
Copy Data *
Paste Data (values, formats, column widths) to the same spreadsheet, only Sheet 2 *
Set the header of the spreadsheet with (Person's Name) and the date
Save the new spreadsheet
There will be as few as 1 sheet (in which case I would only want one worksheet in the new excel file), or as many as 4 sheets. I don't need a fancy way to do this, as it will only be done once a week, and I can just make the various cases required to do it even if it isn't pretty, but I can't figure out how to manipulate other files that haven't been created yet...
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedI need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View Relateddefinitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.