Erase The Entire Row If Column J Is Equal To 1205
Jun 6, 2006
I am trying to do is erase the entire row if column J is equal to 1205. I have made an attempt which is shown below, but I am no where near a VBA programmer, yet.
Sub Softrak_Format()
Rows("1:2").Select
Selection.Delete Shift:=xlUp
Cells.Select
With Selection
.WrapText = False
.Orientation = 0
.AddIndent = False
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False........................
View 4 Replies
ADVERTISEMENT
Dec 3, 2012
I need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
View 2 Replies
View Related
May 7, 2014
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies
View Related
Mar 12, 2013
Why is it when I open a worksheet, or try to delete " extra" columns in a saved document, highlighting the column and going to Edit>Delete does not erase the column? Is there a "locked" function somewhere?
View 9 Replies
View Related
Jul 12, 2012
i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies
View Related
Jun 11, 2009
Let me know how can a worksheet pick automatically equal = sign before manually feeding data
for example:
A B C
1 5+3 2+1 9+2
2 2+3 8+6 4+7
I want 8 in cell A1 and 5 in cell A2. I do not want to manually assigning/adding equal = sign to get sum 8 in cell A1
View 9 Replies
View Related
Jun 29, 2008
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
View 9 Replies
View Related
Apr 25, 2014
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
View 5 Replies
View Related
Dec 6, 2013
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
View 6 Replies
View Related
Dec 8, 2009
I have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies
View Related
Mar 5, 2006
This Sheet contains over 120 000 rows of data.
One thing that is present in the data, that is very important, are
dates, which denote when an amendment to a users details have been
made, and therefore, some users have multiple entries.
I would like to be able to automatically delete all but the last update of each user. ie :
10/06/99 ; Fred Bloggs
31/02/01 ; Fred Bloggs
02/03/02 ; Fred Bloggs
I would like to be able to automatically erase the first two entries,
leaving only the last. Unfortunately, while I am familiar with
Formulas and charts and such, this falls outside of my level of
knowledge.
View 9 Replies
View Related
Jan 20, 2010
basically im setting a range type variable to be the a column of data from a table that is on another sheet but in the same workbook. im wondering if im supposed to get rid of certain variables i have created...especially in an instance like this, where the variable seems to be more of a reference to the actual table data.
Dim curtzeNum As Range
Set curtzeNum = Worksheets("RawData").Range("Table3[Curtze_num]")
should there be an erase statement for these at the end of the sub?
View 9 Replies
View Related
Mar 9, 2013
The code bellow allows me to save a copy of the invoice by way of doPDF using invoice number as the name of the pdf to be saved.
Code:
Else
Application.ActivePrinter = "doPDF v7 on DOP7:" 'Selects doPDF to genarate PDF file of invoice.
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= "E:LusaGenerated InvoicesINV" & Range("L17").Text & ".pdf", _
[Code]...
As there is the need to, should a quotation or an invoice be wrong, to change it. In other words I have code to cancel the invoice as bellow.
Code:
Dim sResponse As String
Dim rFound As Range
sResponse = InputBox("Enter record you want to change." & vbNewLine _& "ATTENTION!
This will change the current record number and will erase record data from saved records sheet.")
If sResponse = "" Then --cancelled or OK with no entry: do nothing or add message
Else
Set rFound = Sheet1.Columns("L").Find(What:=sResponse, LookIn:=xlValues,
[Code]...
The code above simply removes a line on sheet1 to which yet another macro retrieved some info from an invoice such as date, invoice, customer and total.
Now I just realized that when I change an invoice, I will be again when finished, creating another pdf file that already exists.
How can I have the second macro here changed so that it will go to ""E:LusaGenerated InvoicesINV" & Range("L17").Text & ".pdf", _" and delete this pdf file?
View 9 Replies
View Related
May 11, 2007
I use webdings font with the letter 'a' to get a tick in excel but the it erases gridlines surrounding the cell i've ticked.
View 3 Replies
View Related
Jul 8, 2014
I have a list of names in separate but connecting cells (list 1). I would like to use list 1 as a population from which to select and enter names into other cells (list 2). Is there a way that the names in list 1 would disappear from the available population when entered into list 2?
View 3 Replies
View Related
Oct 20, 2008
I want to erase all line breaks which I am not using from my work sheet. But still keeping the line breaks which has something written to it.
this as a example of one cell.
-------------------------------------------
- Example text number 1
- Example text number 2
- Example text number 3
- Example text number 4
- Example text number 5
---------------------------------------------
Using "Find & Replace" I got to replace the ones I want to erase with nothing, so its blank. Too bad the Excel doesn't replace the line breaks with it, so this is what I get.
-------------------------------------------
- Example text number 1
- Example text number 2
- Example text number 4
---------------------------------------------
The result which I want to have is:
-------------------------------------------
- Example text number 1
- Example text number 2
- Example text number 4
---------------------------------------------
I know about the Clean Function but that function eases all the line breaks from the cell, which I dont want to.
If not that whould mean that I have to delete the line breaks by hand for hundreds of cells.
View 7 Replies
View Related
Mar 11, 2013
The following code doesn't seem to work for me except when I use an actual number.
Set MR = Range("A1:A100")
For Each cell In MR
If cell.Value = "*3L*" Then cell.EntireRow.Font.Bold = True
Next
I am attempting to bold the entire row if the macro finds text that begins with 3L in a tab. If I change the code to look for a number, then it works fine.
Also - Is there a way to make this run on specified tabs? For instance, if I have four tabs:
January
February
March
Q1
Say I only want it to run on the January, March, and Q1 tab, how would I go about doing that?
View 2 Replies
View Related
Apr 27, 2004
=COUNTIF(A19:A28,(AND(B19:B28="YES",C19:C28=5)))
What is wrong with my formula above? I am trying to count Colunm A if the value of Column B is "YES" and Column C is equal to "5".
View 8 Replies
View Related
Sep 15, 2014
Dividing column in equal parts divide a column in groups with the same rows and the same total sum? For example, I have the column A as following:
8,942
2,807
2,568
5,818
5,818
596
8,942
4,390
1,607
890
8,772
1,103
The total number of rows is 12 and total amount is 52,254
I want to divide the column in three equal parts with the same total. So each group must contain 4 rows with the total sum 17,418
View 9 Replies
View Related
Jun 3, 2014
I have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
View 3 Replies
View Related
Dec 23, 2013
I am working on a proforma statement, REFER THE ATTACHMENT
A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??
this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula
View 4 Replies
View Related
Apr 26, 2009
This formula in E1 has worked before. I have attached an example, in reality Column A and B have 2000 rows and column D about 250 randomized numbers out of Column B that need to be paired with their equal in Column A.
View 4 Replies
View Related
Oct 12, 2009
I need to apply two criteria to a COUNTIF. Eg, I need to count if one column is equal to "N" and another column is equal to "N/A", taking both criteria into account. At the moment it seems to knock one out when I try applying both!
View 9 Replies
View Related
Aug 18, 2009
Does anyone have a macro that will delete entire row if column a matches column d
View 6 Replies
View Related
Nov 13, 2013
I have three columns: Symbol, Dividend Payment, and Shares.
What formula will look at the shares column and symbol column and say if cells in column C are equal each other & cells in Column A are equal to each other than add all the div payment that correspond with those symbols and shares?
A
B
C
D
1
Symbol
Dividend Payment
Shares
Sum (Formula would go here)
2
SEB
.75
23
3
SEB
.75
23
(result desired) 1.5 (B2+B3) because (add the dividend where their symbol (A2&A3)and shares (C2&C3)are equal) both conditions have to apply to add div payment
[Code] ......
View 3 Replies
View Related
Dec 24, 2008
I need to group all records where the values in column A are equal. BUT I needed them sorted by another column (the whole sheet, not just within each group). Currently, all of the values in column A are listed in random order. Is there any way to do this manually?
to elaborate a bit further, consider the following:
Columns: A-B-C-etc.
1-Z...
1-X...
4-X
3-Y
4-Y
2-Z
Basically, I need to group all of the "1"'s and all of the "4"'s so that the extra values will show underneath the other. HOWEVER, I need them to be sorted such that the order in which they appear are XYZ. So the goal would be:
1-X
1-Z
4-X
4-Y
3-Y
2-Z
View 9 Replies
View Related
May 14, 2009
Starting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.
View 4 Replies
View Related
Jun 8, 2014
I would like to create a formula that will sort the numbers in column B, there are also equal numbers in this column
The difficult part is that there is text in column A, and is linked to the numbers
So if numbers are sorted the names should be sorted in the same way as well.
View 3 Replies
View Related
Dec 24, 2013
I have 2 sheets with thousands of clients. One has client contact information and one revenue. I was able to put the 4 columns on 1 sheet. I need a formula that will say if the value of the client name columns match, (Client name) then return the value in the third column (revenue).
One other question, b/c i copied from a pivot table, i have the client name and their email address below in a separate row. Ideally i would have the client their contact and their revenue in 3 columns next to each other. Is there an easy way to bulk move the email address from the row below the column to the column next to the client name?
View 7 Replies
View Related
Jun 11, 2014
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies
View Related
