Match Cells In 2 Columns And Return Third Column Value If Equal
Dec 24, 2013
I have 2 sheets with thousands of clients. One has client contact information and one revenue. I was able to put the 4 columns on 1 sheet. I need a formula that will say if the value of the client name columns match, (Client name) then return the value in the third column (revenue).
One other question, b/c i copied from a pivot table, i have the client name and their email address below in a separate row. Ideally i would have the client their contact and their revenue in 3 columns next to each other. Is there an easy way to bulk move the email address from the row below the column to the column next to the client name?
View 7 Replies
ADVERTISEMENT
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Nov 13, 2013
I have three columns: Symbol, Dividend Payment, and Shares.
What formula will look at the shares column and symbol column and say if cells in column C are equal each other & cells in Column A are equal to each other than add all the div payment that correspond with those symbols and shares?
A
B
C
D
1
Symbol
Dividend Payment
Shares
Sum (Formula would go here)
2
SEB
.75
23
3
SEB
.75
23
(result desired) 1.5 (B2+B3) because (add the dividend where their symbol (A2&A3)and shares (C2&C3)are equal) both conditions have to apply to add div payment
[Code] ......
View 3 Replies
View Related
Mar 5, 2014
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies
View Related
Jan 11, 2013
I have a file with multiple column headers and data entries (dropdowns) into the rows. I wanted to create a secondary sheet...like a pivot table..if the vertical and the horizontal are both in the two columns selected it returns a value in the table.
I would use a pivot table, but it is a data entry sheet and the pivot table does not bring up all the horizontal and vertical values unless they have already been selected in the sheet.
View 9 Replies
View Related
Dec 6, 2013
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
View 6 Replies
View Related
Jul 1, 2008
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies
View Related
Jul 23, 2012
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
View 5 Replies
View Related
Apr 4, 2008
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
View 4 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Oct 4, 2008
1. i am comparing text
2. i have >100 countries, and with vlookup i have to type every single one, and this is what i want to escape (mb i need to refer to an array, or string, or no idea)
3. mb a solution could be sth with index, or match, i just tried it, copying some similar formula from www, but it didn't match the countries, and return the value respective for that country.
E.g. I have China in col1 (1st file), #employees 10 in col2 (1st file), and China in Col 1 in 2nd file. So, a formula should match China & China from both files, and return 10 as number of employees.
View 2 Replies
View Related
Jul 4, 2013
I have 2 columns of usernames A and B, A has approx 700 usernames and B has about 80. In column C I have a list of names 1 for each username in column A. I want to compare the B with A and if there is a match return the value in C and place it in D.
View 3 Replies
View Related
Jun 7, 2014
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
View 2 Replies
View Related
Jun 5, 2009
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies
View Related
Sep 23, 2009
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
View 9 Replies
View Related
Mar 12, 2008
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
View 9 Replies
View Related
Apr 20, 2012
I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1
View 2 Replies
View Related
Dec 3, 2012
I need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
View 2 Replies
View Related
Feb 14, 2013
Say I have data in one tab that is cells
A9, B9, C9, D9, etc.
On the next tab, I want the cell in D5 to equal A9, D6 to equal B9, D7 to C9, etc.
I can't seem to lock the cell correctly to do this. If I use =A$9 in cell D5 and then copy down in cell D6 I'll get A$9 also, but if I use $A9, in D6 I'll get $A10.
View 10 Replies
View Related
May 30, 2012
I am trying to return the column name to the user based on a cell value. I am using the formula =Match(C2,1:1,0). This returns a numeric value of the column based on the match. What I want to get back is "AL". Do I need to use some format calculation to achieve this?
View 5 Replies
View Related
Aug 22, 2013
I want to write a macro that match multiple column and return a value as I show in the table below
Plant
SLOC
Grade
Posting Date
1
555
abc
[Code] .....
I have to check multiple column from 2sources and get the Posting Date from Table2 to Table1. I'm quite confused about the function which I should use like match, lookup, index, etc.
View 4 Replies
View Related
Jun 17, 2009
I have used index/match before to match and extract data, but I can't seem to wrap my head around this one. It's probably best explained by looking at the attached workbook. Basically, I want formulas in 'John Doe!B' and 'Jane Doe!B' to look up the Name and Date values in column A on the 'Data' sheet, and then return the time value that is on the same row but in the 'Data!B' column.
I then want 'John Doe!C' and 'Jane Doe!C' to return the time that is two rows below the time shown in 'John Doe!B' - I've gone and manually entered and bolded the values in the workbook to show what I eventually want the formula to do. The data on the 'Data' tab will be extracted monthly into excel from tracking software my company uses, but there will always be a minimum of 3 rows of time for each date. As you can see in the example workbook, some dates will be omitted for some people, and while there will always be 3 minimum rows there will often be many more time entry rows for different dates as well. However, I'm only concerned with the 1st row and 3rd row for each date.
I was originally thinking a vlookup for 'John Doe!B' and then a hlookup for 'John Doe!C' that references the value in B might work, but I'm getting stuck on how to ensure the formula realizes the differences between the data and dates for John Doe and Jane Doe.
View 3 Replies
View Related
Sep 27, 2007
I have data in 1 column that I want to match data in the second column. If it matches a value in the second column I would like it to return the value from a row in the third column.
View 9 Replies
View Related
Sep 15, 2006
I am trying to match up data in two cells and then return the value in a third
Cell1 Cell2 Cell3(Return Value)
acc. pos
12345 1111 a
12345 5555 b
55555 2222 c
Match these cells to above anywhere in an array and return value in aboce cell 3 if found.
Cell1 Cell2 Return here
acc. pos
12345 1111 a
12345 7777 leave blank
View 5 Replies
View Related
Sep 2, 2007
i tried using the lookup but it gave a different result. i want to search a value from sheet1 A to sheet2 A and copy the remarks from sheet2 B and paste it to sheet 1 B and if not found leave it blank.
here's the attach file i just trim it down.
View 5 Replies
View Related
Jan 29, 2009
I have a condundrum that having trouble solving hoping someone may be able to help...
I am trying to return the contents of all cells that match a value based on another cell.. I have managed to achieve with the forumla below but it only returns the first value matched.
what I wish to do is return all values in ROW E where the value in ROW B equals Deliver and combine into one cell [F1].
ie.
B E F
DELIVER VALUEW VALUEW VALUEY
COLLECT VALUEX
DELIVER VALUEY
The formula I have currently uses index but only returns the first value found. I need to find all values and place in one cell. C5 holds value 'deliver'
=IF(ISERROR(INDEX( 'Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0))),"",INDEX('Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0)))
View 10 Replies
View Related
Feb 14, 2014
I have a spreadsheet that contains data for a fiscal year broken out by month and quarter. I want the formula to return the data from that month and use whatever the latest quarter is. For example in the data below:
If it has only pulled data only thru Q1 it would return Q1 for Jan-Mar, however once I have Q2 data I would want the formula to return Q2 for the months of Jan-Mar.
2013Thru Q1STOLISTOLIJan-2013STOLI BASE
2013Thru Q1STOLISTOLIFeb-2013STOLI BASE
2013Thru Q1STOLISTOLIMar-2013STOLI BASE
2013Thru Q2STOLISTOLIApr-2013STOLI BASE
2013Thru Q2STOLISTOLIMay-2013STOLI BASE
2013Thru Q2STOLISTOLIJun-2013STOLI BASE
2013Thru Q3STOLISTOLIJul-2013STOLI BASE
2013Thru Q3STOLISTOLIAug-2013STOLI BASE
2013Thru Q3STOLISTOLISep-2013STOLI BASE
2013Thru Q4STOLISTOLIOct-2013STOLI BASE
2013Thru Q4STOLISTOLINov-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2014Thru Q1STOLISTOLIJan-2014STOLI BASE
View 3 Replies
View Related
Sep 29, 2013
I have two files. They both have US census tract numbers in a column GEOID2010. One also has a CSA2010 text description associated with each census tract.
I need to match the cell with a census tract in the first file (example1).xlsx with the census tracts in the second file (example2.xlsx), and then return the CSA2010 text from the next column over to the first file.
I've attached two example files.
View 4 Replies
View Related
Feb 16, 2014
A B C D E F
Latest Status
Latest Date
Current Status 1
Current Date 1
Current Status 2
Current Date 2
#VALUE!
Sun,16-Feb-14,11:0 PM
Take1
Sun,16-Feb- 14,10:41PM
Take2
Sun,16-Feb- 14,11:02 PM
My formula =IF(B3="","",OFFSET(A3,MATCH(B3,B3:F3,0),0,2)) in A2 is giving me #value error.
The correct solution should be Take2, while matching the condition from B2 latest date.
Sheet Attached. File Name-Latest.xls Zippyshare.com - Latest.xls
View 5 Replies
View Related
Sep 3, 2009
I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
View 9 Replies
View Related
