I'm trying to extract data from once cell and list it for each cell where certain criteria are met. I'm using Index and Match...it works great for the first set of criteria, but returns the #REF for all following criteria. Here's my formula and I attached the file for your use:
"=INDEX($C$2:$C$160,MATCH(D$1,$B$2:$B$160,0),MATCH($A2,$F$2:$F$8,0))"
This will get kind of complicated just a heads up.. I will try to take it in phases.... Without actually uploading my true sheet I will do my best to give a representation of what I'm trying to accomplish. Basically I will have Lists for the Year by Month. In each month the list will compile a list of problems and there corresponding data for each problem. Most of the problems will be internal, however some will be due to external (a supplier). When this occurs the suppliers name will be input into one of the columns. I want to beable to pull out the suppliers from each month and then sort them in order from top offenders to minor offenders by "QTY"
See the attached example sheet. That should give a better understanding of what I need to do.. I am not sure if this can be done with worksheet functions so I posted it under the Programming thread.
I have some cells with text entered in column A.
These cells contain a time reference either in '09:30 - 16:30' format or just an 'AM/PM' format.
What I need to do is to populate column B with the part of the string that comes AFTER the times in the text (either in hh:mm format or AM/PM format)
Example
336 Data 2012 Classroom Induction 2012/08/28 09:30 - 16:30 data about this ------> data about this
336 Information about this 2013/04/04 09:00 - 13:00 Information 2 ------> Information 2
336 info CHS Suffolk 2013/05/07 PM DRC, BSE ------> DRC, BSE
364 information 2013/02/12 AM DRC, BSE ------> DRC, BSE
I cannot get this to work and cannot use Text To column as there is no character I can use to split it.
if I had cells that contained values:X220 Lecture 1 [800]
X220 Lecture 2 [75.0] Is there a way to copy the value within each cell between the [ ] and paste that into another cell? As an example:
A
B
Lecture 1 [75.0]
75.0
Lecture 2 [100.0]
100.0
I have a series of numbers like the one below in Column A and I need to end up with everything between the dashes in Column B.
A-HUN510500-EA
how can I extract data from one column( cell) to several lines(cells) (every slash marks new column like on picture below) without doing it manually (I have 100 cells and I cant do it on foot). http://kemija.org/excelq.jpg
View 2 Replies View RelatedI have data in several cells, and I want to extract only the information in the cell up to a /. For example "joesmith/shipping" I would like to have only joesmith in the cell next to it.
View 2 Replies View RelatedI have a worksheet with over 10,000 records. The column that lists where a person is willing to relocate can have up to 60 city/state entries in one cell.
Here is an example of what appears in one cell - this is exactly how it appears:
ASAI Los Angeles (XX , CA
DFO Pacific (XX ONLY), CA
DFO Pacific Area Analyst Laguna Niguel (XX ONLY), CA
SAI Los Angeles (XX ONLY), CA
Ldr Los Angeles El Segundo POD (XX ONLY), CA
Ldr Los Angeles Long Beach POD (XX ONLY), CA
Ldr Los Angeles POD (XX ONLY), CA
Senior Ldr (XXXX) Washington (XX ONLY), DC
What I need to do is be able to sort on city and state, so I wanted to be able to extract and separate the city and state. I tried using a find/replace (CTRL J) to enter a semicolon between each entry and thought I could do text to columns to separate, but that doesn't work.
How I could extract this information? Notice that the first entry is missing ) - that is throughout the records.
I'd like to have a formula in Column C which would extract the quantity from either Column A or Column E depending on the value in Column D.
A ---- B ---- C ---- D----------------E-----------F
QTY -UOM----------Tariff #----------QTY 1-----UOM1
46----PCS---------3402.12.5000----94.3--------KG
85----PCS---------3402.12.5000----174.25-----KG
4-----PCS----------3701.10.0030----4.8---------M2
5-----PCS----------3701.10.0030----1-----------M2
15----PCS----------3701.10.0030----1-----------M2
i have 20 different materials which have codes assigned to them
wh = white
ivory = ivory
db = duck egg blue
etc etc
when i create an order some of the codes will be called up
i want to be able to put them codes plus the description into the worksheet Ideally into the header. if not call a1
I was wondering if there is a formula that will search a cell for a word or other specific criteria then if it finds it, puts the requested data / word in the formula cell
Example:
If I have a list of vehicle descriptions all in different formats:
CAR1 1.4 SRI 3 door Hatch
CAR2 5 door saloon GSI 2.0 V8
2.2 CDX 5 door CAR3 Estate
CAR3 Estate 5 Door CDX
Say I want to know which ones are CDX varient I need the formula to look in the cell and return "CDX" or "YES"
I have two columns,
Name
Marks
Amit
45
Ankit
54
Aditya
Arun
Ayush
43
Amar
Akas
32
Akshay
21
I want to extract first data from column Name where in the data corresponding to it in Column Marks is blank, and if that is filled, i want the next data to be shown automatically
I am trying to extract some data from a cell leaving the rest of the cell untouched.
I would like to extract C:UsersDanMusicIan MusicKaraokeKaraokeBob Marley & The Wailers - Jammin'.mp3 from the cell leaving Bob Marley & The Wailers - Jammin'.mp3 in the. I have to do this to 3000+ rows.
I need a formula to extract data after "<li>Color: " & before"</li>"
A
B
1
ORIGINAL
RESULTS
2
blah blah blah<li>Color: White</li>some informations
White
3
blah blah blah<li>Color: Red</li>some informations
Red
4
blah blah blah<li>Color: Black</li>some informations
Black
5
blah blah blah<li>Color: Red</li>some informations
Red
I have already use this formula but I get the "#VALUE!" error even if the cell contains the "<li>Color: </li>" data.
[Code] ....
Sometimes, some cells does not contain the "<li>Color: </li>" data, I don't want the "#VALUE!" error, I just want a blank cell there.
This is an example with the real values I want to extract Example.xlsx
This is the formula that works
[Code] ......
I have some code that is importing data from a text file that contains ~35,000 line items and is ~50 columns wide (this part of the code is working fine).
Once the file has been imported, I need to copy certain line items to a sheet called output. The code would be something like this if reading line by line:
If the value in row x, column 5 (it is always in the 5th column) in AccountList then
copy entire row and to next empty row in sheet(output)
The AccountList is separate sheet with a list of account numbers in column A with ~250 items.
I am not sure if the code to extract this data should occur while I am importing the data or if I should do it after and run through the data again.
I have data for the distances of cars journeys. I'm looking to extract the 1st journey distance for each date for each car. The car registration number is in column A.
This is an example:
Sheet1 ABCDEF1Reg number Date distance 1st Journey distance
210D1449904/01/20119.271 9.271310D1449904/01/201110.016 1.876410D1449905/01/20119.292
510D1449905/01/20119.629 610D1449906/01/20119.327 710D1449906/01/20113.185
810D1449906/01/201110.163 910D1555506/01/20111.876 1010D1555612/01/20119.534
1110D1555712/01/20111.48 1210D1555812/01/20115.628 1310D1555912/01/20115.356
Basically, I need to extract data from a grid/table (11 columns wide) and transpose it into a list for use in a pivot table. It like sort of reversing a pivot table to access the original data but I only need 5 of the columns repeated for each occurrence.
I have read many internet sources but they don't seems to fit my needs. Here is a solution from a similar question posted on StackOverflow entitled "How to “flatten” or “collapse” a 2D Excel table into 1D?"
The attached simplified mock-up explains what I am trying to do. I have colour coded the data to understand. The number of rows (10) will always be the same but the number of columns (Branches in this case) can extend for many columns.
Im using XL 2k and working on several worksheets. Im trying to create a formula to do the following.
On Hardware Wksht Tab cell B20 should extract data from HardwareLIST Wksht if it matches to cell C20 from Hardware Wksht Tab. The cell in HardwareLIST A10 is a drop down list of hardware.
C20 Specifies 4 x 8 Only
C21 Specifies 4 x 9 Only
C22 Specifies 4 x 10 Only
However the drop list contains 3 different types of 4x8's, 4x9's & 4x10s. If selected then B20 should read drop list and match criteria & return the value from HardwareLIST D10. Im having trouble formulating this one.
I have a spreadsheet which in the first column has dates for every day of the year(for many years), and figures in the second column. I want to extract the data relating only to the month end dates. What is the best way to go about this?
The month end date may also only be the last working day of the month rather than the actual month end date
[URL]
You can download the excel from the above link.
This excel includes some text data, in each cell there is an email address along with additional text. I only want to get the email addresses from the entire data.
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I have a text data stored in same cell of different worksheets on the same
file. I need to list them down in a single fresh worksheet. Is there any
formula or any way that I may use?
I'm trying to have a Data Validation list issue where I want to populate a second list based upon the value of the first list.
In this instance I have a Department in the drop down and Employee Name in the second drop down and I want people to only see Employee names if they're allocated to a particular Department. I've been able to do the list using the INDIRECT function, however that only works when there's only a small sample of both names & depts, however I'm looking at populating this document with around 3000 people and over 250 departments, so I would like to be able to use Column J on the Source Tab to populate the details on the Manager Entry tab.
I have attached a sample spreadsheet if I've not explained very clearly.
TIMESHEET sample.xlsx
Trying to pull data from a list and if the cell above is empty then pull the data from the cell below and so on........
I have some code for it..but its just a little bit too long and I can't use it
This is what i have so far, trying to simplify it as its way to long to fit in a singel cell....i did think about breaking it down in to collums of either 8 or 6 and having it in chunks that way...but if i did that then i would still have to eventually use this forumla below as i don't really want huge gaps within the form i'm doing.
I have a scenario where a cell has to be restricted based on the user input of another cell, also it should allow only Yes or No values.
ex:column A
column B
pending response
submitted
User should be allowed to enter a value in column B as "yes" or "No" only when column A has a value "Submitted"
I referred the thread to restrict entering the data [URL]...
However not able to add list as well.
How do I get a drop down (gender list) to affect the data in another cell? ie when male is selected this automatically affects another cell - data 13.5 and when female is selected as gender the cell data is 12.5.
View 3 Replies View RelatedI am trying to create a drop down list so that when the user choose Option A, Outcome A populates the cell.
So for example, I am looking to show a list of all Grades within the company, when the user selects a grade, the salary is populated into the cell.
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I have a list of 688 codes in a column (lets say column A). e,g 23, AB, FX, NV, D8. Each code corresponds to a text In the next column (lets say column B) for example AA is the code for "Transmission". Using a clean spreadsheet and using a drop down list, I would like the cell to the right of the selected dropdown code, to automatically fill in the text of what the code corresponds to.
View 5 Replies View RelatedI am including a sample. On sheet 1 I am trying to do data validation in that large merged cell using List and =Cements. Why do I get the error that pops-up?
View 5 Replies View Related