i'd like formula to find value above and below specific cell
for ex
i have value in cell c5
i want formula helps me to find
values above c5 in cell c4,c3,c2,c1
and
values below c5 in cell c6,c7,c8,c9
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies View RelatedI'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI have a database that contains many products. All of them has a number.
I have an cell and a button for search. I am entering on the search cell the 254 number , and when i click the search button , i want a macro that can select me the cell that contains the 245 number from A column.
Till now i had tried with the following procedure.
I had made another cell which contains the following function
=MATCH(G6,A1:A100,0) , where G6 = my search cell for the number. This return my cell number from A column , but i don't know how to select that cell from the vba
I had tried with the ActiveSheet.Range , but i had to input the cell which i want to select , or it's there a way to enter the collumn where to find and the cell number to get from my MATCH function ?
I am trying to check some data (about 5000 rows worth) and don't want to have to go through each row. What I need to do is check whether the 7th number in a string is below 5, and then to return a text result for above 5 and a different result for below 5. For example:
B4: 88050170088
7th value = 7, therefore return "Male"
I have tried =IF(MID(B4,7,1)>5,"Female","Male") but it is not working and I can't figure out why..could also just be making a rookie mistake....
I have absolutely no idea how to get starting on this one. I've got a long string in cell B1. At some point there is the word "oms:SomeString," (without the quotes). I need to know whether SomeString is somewhere in the active sheet or not (the workbook running the VBA-code is not the active sheet). I can't just compare the cell B1 because it contains multiple words. Any hints are very welcome.
View 3 Replies View RelatedI need a vba code that will find all the columns (j) which there cell(1,j) includes the word "Date". the word "date" will be a part of a title, for exmple: "due date", "starting date"
View 4 Replies View RelatedI am trying to put an IF statement together. If the 7th character from the left is 5 it must show M, and If 0(zero), it must show F
View 2 Replies View RelatedCells A1:A5 all have a vlookup formula that will pull one of the following into it:
1. The word "NONE"
2. #N/A error since it doesn't exist in the table
3. A text value that has the format 13.55.46.91
I want a formula that will look at these 5 cells and give me #3. That #3 value can only appear once in the 5 cells in any of those 5. The other 4 cells will contain either 1 or 2.
3 always has length equal to 11. It always has periods in those places. The digits do change.
I have at database which i want to search in... The problem is that i wanted to search in specific cells, or ranges. So i made a for loop searching for words in one range.. But it doesn't work.
For i = 0 To antal - 1 Step 1
Worksheets("Søg").Select
If Range("B5") = "X" Then
Sheets("Database").Select
c = InStr(1, Range("B" & 2 + anRow * i), sgbygsag, 1)
Sheets("Søg").Select
Range("A1") = c
End If
Next
anRow is the delimiter between to databases. And sgbygsag is the string i am searching for, i have made sure that this really is a string. No matter what I do this code sets Range("A1") to "0".
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I am currently using this formula -
=SUMPRODUCT(--(MONTH(Leads!B3:B999)=1),--(YEAR(Leads!B3:B999)=2013),--((Leads!J3:J999)="Contract"))
This gives me the count of rows that have Jan as the month, 2013 as the year and Contract word in column J. Now I want to add another column to be checked. That column has values in format - Design: X, Design: Y, Design: Z etc.
So I want to have the condition above and the cells that have the word Design.
I trying to look for a all the cells with the same fill color in the same column and assign a specific text to the cell for example
Column A - Cells with fill Yellow must have for text the word Sub- Total
Column A - Cells with fill Black must have for text the word Grand Total
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I'm having some difficulties in defining my formula. I'm pretty sure that this should be possible.
I have a table containing values and dates. For each change in dates, I should summarize every value for that date. I cannot use the autosummarize function, because I do not want the sum to be beneath the values, rather in a column to the right of the values.
I have created a formula which checks for a change in date: =IF(C15=C16;0;1) where the C column contains the dates. Basically I say that the Index column should contain a 0 if the date is the same as previously registered, 1 if it is a new date.
The index column is used in some conditional formatting rules, so I would like to keep it anyway.
Could you tell me how I can find a specific sentence within a cell that contains many sentences.
for example
I want to find, "I am new." within a text that contains, "Hello I am Bob. I am new. I live in england."
I am currently using =+FIND(AB$1,$V2) where AB1 contains the sentence I am looking for and V2 contains the cell full of sentences. However this returns #VALUE! when the sentence is not found. I want it to return null.
I'm faced with receiving data for time, in a text format, as follows:
Example of possible cell contents...
20secs
40m20secs
2h40m20secs
I'm not interested in the secs value but need to isolate the h (hours) and m (mins) values to use in another formula as numbers. The time could be shown in either of the above formats with either; (a) just secs, (b) mins & secs or (c) hrs, mins & secs... and of course the hours or mins values could be 1 or 2 digits in length. How can I determine (using formula only, not vba) what the values for hours and/or mins are dependent upon what is present?
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
a macro to the for whichever column I choose.
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
I'm creating 10 'categories' for Column "C" that I plan on using drop-downs to select from. Column "H" has a value tied to "C". What I want to do, is have Excel SUM all of the values in Column "H" where the Category in "C" is a specific text value (e.g. say a category is "hardware", I want a cell with a formula that sums all of the values in "H" where "C" is "hardware".)
View 8 Replies View RelatedI have a spread sheet with following:
Name|Address|Home Phone| Cell Phone| Status|Project Name|
I want to select name and extract only home phone and cell phone nos.
Please help me with a code. I have about 2500 entries.
as-18542-1
sp-25641-1
as-35678-4
u can see in that no last part like this.-1,-2,-4
i need to remove that part.i have lot of no like this.i am going to do this manually it will take long time.pls some body can make macro or something for this.
answe should be like this.
as-18542
sp-25641
as-35678
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I want a range to be filled based on 2 cell values in my sheet. The autofill range should be filled based on the values in the input range. For instance in cell A1 I place the value 1 and in cell A2 I place the value 10, then the macro should automatically fill in the numbers from 1 to 10 in another column. If I change for instance the input values to 5 and 15, then the autofill range should fill up the numbers from 5 to 15.
View 4 Replies View RelatedI'm looking for a formula to sum three adjacent cell values in a specific row and then sum up all of the rows.
A B C
1 0 2
3 1 2
4 4 0
For example, the value for the above would return 17 = [(1+0+2)+(3+1+2)+(4+4+0)]
I've had a look at some examples of extracting unique values but it seems quite complex to me!
I have a list of customer names in column A, column B contains a material code (number format), column C contains the material information sheet (text & number format), column D contains the date that the material information sheet was sent (all column headers are in row 1).
Columns E, F & G follow the same format as above but for a different material code - this is repeated further in Columns H, I & J.
All of the material codes are different, but some material information sheets can be the same for some materials.
In column K I need to identify the unique material information sheet values for each customer, as some are duplicated.
Is this possible? There may be some blank values in the row i.e. a customer does not receive a certain material.
Perhaps just an easier way of organising the spreadsheet!