Formatting Percentage With A Difference?
Nov 6, 2011
I was wonder if there is anyway in excel to do the following. I have a table that shows %'s,,, and I have formatted it to show 1 decimal place. Is there anyway to do it so that if the % is a whole number, IE 100% it shows just 100% and not 100.0%
So; basically, all %'s that aren't whole numbers will show 1 decimal place,, whole numbers to show NO decimal place.
I can see in excel a custom formatting under the Number tab,, but if this is where you do /can do it,, I'm not sure how.
View 9 Replies
ADVERTISEMENT
Apr 3, 2009
Using conditional formatting i am trying to write a formula that changes colour on the percentage difference of another cell.
An example would be if cell A1 contained a target of 5% in cell A2 would be an actual. If cell A2 is equal to A1 or better then it would be green. If cell A2 was within 10% less of A1 (i.e 4.5%-4.99%) then amber and red for the target minus 10% (i.e <4.49%)
I want to do this as a conditional formatting formula as the target figure will change but 10% difference will remain the same.
View 5 Replies
View Related
Apr 29, 2014
Pivot Table where I am comparing prices with previous quarters using the % Difference from and using Quarter/previous as the base.
The function works fine but I can't get any values on Q1 to compare with Q4 of the previous years. All Q1 for every years show no % difference.
View 2 Replies
View Related
Jan 22, 2014
Can use an icon set conditional format to solve the following -
if I have an order figure in A1 and a received figure in A2 I want to show a tick in A3 if the received figure is within 10% either side of the order figure.
View 4 Replies
View Related
Sep 15, 2009
I am trying to create a formula that can work out the % difference between two values. The formula I am using is:
=(B1-A1)/ABS(A1)
So, where
A1=1, B1=2, = 100%
A1=-1, B1=2, = 300%
This seems to work perfectly, apart from where there are zero numbers involved. The answers I want to have are as follows:
A1=0, B1=0, = 0%
A1=0, B1=-1, = -100%
A1=0, B1=1, = 100%
A1=-1, B1=0, = 100%
A1=1, B1=0, = -100%
View 3 Replies
View Related
Jul 9, 2008
How do i work out the percentage difference between two colums and show the results in a third? I then need to know the average of that third colum
View 9 Replies
View Related
Dec 5, 2013
Formula "(Cell-Cell)/ABS(Cell)"
When calculating percentage difference do I always subtract the smaller number/cell from the larger number/cell, then divide by the smaller number/cell or vice versa? Maybe I am over thinking it, but it is confusing the heck out of me
I provided an example below to illustrate a spreadsheet I work on. The numbers go up and down. I want to know how I should go about setting up the formula. If I need to ensure the smaller number is always subtracted from the bigger number, it will require a lot of manual intervention on my part.
Row 3 is =(b2-b1)/ABS(b1)Row 4 is =(b2-b1)/ABS(b2)Row 5 is custom. I went through each cell and made sure the smaller number was being subtracted from the larger number, then divided by the smaller number
PercDiffExample.xlsx
View 4 Replies
View Related
Sep 27, 2006
I have a spreadsheet which has a number of columns populated with a day number and below each day number there are some numbers. What I would like to do is to compare the values for Day1 with Day2, Day 2 with Day 3 etc. Is there a smart way to do this using VBA? I am enclosing an example to show what I would like the macro to do.
View 8 Replies
View Related
Feb 16, 2008
I have an excel file that linked to an external feed that receives stock prices in real time. on the file i have the stock name, the price paid and the current price. I would like to have a popup that shows up whenever a stock price has a 15% or higher return. I would like the popup to show the stock name. I realise that conditional formatting would highlight whatever is over 15%, but the workbook has multiple worksheets and I would like it to popup even when i am on another worksheet.
Enclosed is a copy of the file (the actual file has many more sheets) : john.zip
View 5 Replies
View Related
Mar 16, 2014
In looking for examples of business budgets I found a sample spreadsheet that used these two conditional statements:
A) to calculate the difference between the Budget and Actual numbers: =IF(OR(B10,A1), B1-A1,) where B1 is Actual $ and A1 is the budget $.
B) to calculate the percentage (+ or -) =IF(A1,C1/A1,) where A1 is, again the budget, and C1 is the result of the difference calculated in A) above.
What is the advantage of these conditional formulas over the more straight forward B1-A1 and C1/A1
View 1 Replies
View Related
Feb 16, 2008
I have an excel file that linked to an external feed that receives stock prices in real time. on the file i have the stock name, the price paid and the current price. I would like to have a popup that shows up whenever a stock price has a 15% or higher return. I would like the popup to show the stock name. I realise that conditional formatting would highlight whatever is over 15%, but the workbook has multiple worksheets and I would like it to popup even when i am on another worksheet. enclosed is a copy of the file (the actual file has many more sheets)
View 4 Replies
View Related
May 11, 2014
Excel 2010 - Solver will NOT work with whole numbers and that is what I need (only whole numbers, i.e whole vials being used). So this is a drug/inventory problem. The drug is dosed as 25, 35,or 50 units/kg. Also a Max dose is reached with 100 kg. (this I can do). The trick is we want to use whole vial sizes and the vials come with varying amount of drug per vial (480-620 units/vial). We can enter our existing Inventory to get the exact units/vial and number of vials on hand. Now I need to figure out the best combination of vials in Inventory to use to get the closest to the dose needed. If Max dose is reached then the MOST we can go over the max dose is 5%. I'd like to see the percentage difference from the calculated or Max dose.
View 7 Replies
View Related
May 6, 2014
Here's my example: We budgeted $15,000 (cell C38) for tuition reimbursement and YTD have already paid out $11,500 (cell B38).
I currently have the formula =100*B38/C38
This returns the answer $76.67. When I format the column to percentage, it the returns the answer 7666.67%.
How do I get this to read as 76.67%???
View 2 Replies
View Related
May 9, 2014
I would like to compare % difference between date range through pivot table
Date RangeProductAmt
1st weekABC1000
2nd WeekABC2000
3rd WeekABC1259
1st weekXYZ3000
2nd WeekXYZ4000
3rd WeekXYZ2500
How to plot a Pivot table to compare the % difference between 3rd Week Vs 2nd Week Vs 1 Week for each product through pivot table?
View 2 Replies
View Related
Dec 18, 2013
I have a Pivot Table with fields for months and weeks. I also have a "Show Values as % Difference Field" that shows monthly or weekly % change. When I collapse the fields so that it goes from weekly to monthly (or vice versa), I have to manually change each Show Values As % Difference column. Is there a way to do this automatically or quickly?
View 1 Replies
View Related
Apr 3, 2013
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
View 2 Replies
View Related
Feb 18, 2014
I have an excel sheet for recording the results from measurements made on round material.
What I want is to have the conditional formatting so that if they have more than the allowed difference in a column they are highlighted red.
Example:
Allowed difference is 0.06 so the cells with a larger difference would be highlighted red.
580.09
View 1 Replies
View Related
Feb 21, 2013
I am trying to figure out why my number will not format correctly... I have a number thats value is pulled in via external data that gets updated everyday.
Everything works fine there, but I needed the format of that number that was pulled in to have parenthesis around it...
I know that one can add the parenthesis to the number by using the ="("&(Number)&")" function...
What the problem is is that when I add the parenthesis to the number it will not allow me to view it as a percentage; it will leave it as a full general number (Ex. (0.0006), instead of (0.06%)
Is there a way to get the percentage number format back?
View 2 Replies
View Related
Jun 29, 2014
I would like to format a number of cells depending on the percentage of another cell.
I have a cell 'Seats" that has a number in it. In other columns, 'Stop1', 'Stop2', 'Stop3', are vaious numbers. I would like to format the Stop cells according to how close (or over) the number is that is in the 'Seats' cell. For example, if Seats is 30, Stop 1 is 15, it would be a medium red. Stop 2 is 30 (or over), it would be red. If Stop 3 is 5, then white. Basically a percentage scale of color depending on the number in the Seats field.
View 1 Replies
View Related
Oct 5, 2013
I need a conditioning format formula. If cell A2 is less than 50% of cell A1, then highlight red.
View 2 Replies
View Related
Jan 26, 2014
Using conditional formatting to make all the cells that contain numbers and are formatted to percentage format make display in red color? let's say I want to set this conditional formatting rule initially after just opening the excel book and afterwards when I type in values/text etc. into the cells I want the cells where I have input numbers and chose the percentage format to come out in red color? and all the rest stay in black color?
View 6 Replies
View Related
Apr 10, 2014
I would like to use conditional formatting to mark cells with arrows depending on the difference between the values in those cells and figures from different cells. Namely, I have percentage values in column A and B. I need cells in column B to be marked with arrows (up, right or down) when the difference between value B and A is bigger than 2%, bigger than 0 but smaller than 2%, and smaller than 0 respectively (see the spreadsheet attached).
View 2 Replies
View Related
Feb 27, 2014
Is it possible through a macro that the cells where numbers is in percentage format should not show any decimal points (is should not roundoff) just decimal points should not visible. I am aware that this can be done by "decrease decimal" but data will be across thousand of rows manually it will be very time consuming.
I have attached a sample worksheet : Percent.xlsx
View 3 Replies
View Related
Jun 11, 2014
I currently have a thermometer chart in Excel 2013 that I set up with percentages along the Y-Axis. The thermometers are showing spending based on a budgeted number. Currently, the project is over-budget so I have adjusted the thermometer scale to go far beyond 100%.
I would like to have the percentages past 100% show in red along the lefthand side.
View 2 Replies
View Related
Nov 20, 2013
I have a sheet (example is attached) that lists multiple jobs and their related tasks. I want to know if it's possible to create a conditional formatting that says if the percentage complete under the "task" is under 100% and within X number of days of the target date, it's red/yellow/green.
So, if a target date is 70-100 days out; 0%-10% - RED, 11%-45% - YELLOW, 46%-100% - GREEN
If a target date is 40-69 days out; 0%-45% - RED, 46%-75% - YELLOW, 75%-100% - GREEN
If a target date is 20-40 days out; 0%-60% - RED, 61-90% - YELLOW, 91%-100% - GREEN
If a target date is 0-20 days out; 0%-85% - RED, 86%-95% - YELLOW, 96-100% - GREEN
If a target date has passed, Anything under 100% is RED.
View 4 Replies
View Related
Sep 29, 2011
I need to have a conditional format that will adjust based on percentage ranges.
1% to 25% would be shaded red
26% to 50% would be shaded Orange
51% to 100% would be shaded Green
I was hoping to reference another cell and have the formatted cell reflect the conditional format. I dont think that's possible, so I can include a percentage in another cell and have that highlighted.
View 9 Replies
View Related
Mar 12, 2014
I am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx
View 3 Replies
View Related
Apr 26, 2013
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
View 3 Replies
View Related
Aug 27, 2009
I read from one of the posts here and see sum(a1/a2). I tried it on excel and see no difference between sum(a1/a2) and (a1/a2). if there is a difference, could you please highlight to me? If not, why put 'sum'?
View 2 Replies
View Related
Mar 28, 2008
I am trying to work out to get the following result.
Using Cell CB5 as a Date Of Birth, I want to be able to have cell CA5 return "Yes: if the following is either met..
If under 45, Cell
View 9 Replies
View Related
