I am looking to use the formula's to determine if the contents of a cell, match or meet a given formula.
In this case, 3 alpha + 3 numeric, e.g. ABC123.
I would want it to return a TRUE or FALSE.
I've done it the long way by tearing apart into the 1st through 6th characters, but would enjoy a more succinct method.
How would I verify a postcode format that starts with a number followed by one or two letters, space, number, letter, letter, if correct displays correct if incorrect displays incorrect
View 14 Replies View RelatedI am having trouble with using the auto filter, and I suspect it is due to my data format.
I am importing data from an outside source (I have no control on how the data is output). The data in the column I am concerned with contains various formats, such as numbers, letters, and a combo of the two. e.g.:
12345
sample
sam123ple
I have been taking the entire column and formatting it as text to make all of the data consistent. The problem I see comes when I go to use the autofilter, to say custom>begins with "123". The value 12345 does not show up in my filter. However, if I double click the cell 12345, then hit enter, and re-run my autofilter, it shows up.
Does anyone know the reason why this double-click-enter method forces Excel to recognize the value? And is there a way to mass-produce this command for the entire data set? Right now, I'm up to 5000 lines of data, so to do this on each would take a while.
i need to make a formula for excel which will verify if my actual value falls within a specific range. for instance if my value is 0.15 and the allowed range is 0.145 to 0.155 then i want to display the number zero in the cell however if the actual number is above or below the range i want to calculate the amount of deviation from the range
View 2 Replies View RelatedI would like to use conditional formatting verify that the lines of data being pulled from my application into Excel, but totaled using "=sum" are equal to totals pulled directly from my application. I believe that I should be able to use conditional formatting but am not sure how to make the formula work correctly.
To illustrate my problem: I have cells A1 (a total of a range), A2 (also a total of a range) and A3 (total of data pulled directly into my Excel report). In cell A3 I would like to verify that lines A1 + A2 - A3 = 0. This I can do without any problem, but there is rounding involved. The total of the above formula should be between -1 and 1 and still show as correct. I want the number in A3 to show up in red/bold when incorrect.
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
My Sheet1! looks like (image attached)
On Sheet2! i want to import all rows belongs to Nov-13. Similarly on Sheet3! all rows belongs to Dec-13 ... How to do such dynamic filter using array formula?? I need array as my data source is a form & new rows will be added everyday. I want to do that by formula not using spreadsheets 'Filter" option.
Expected result will looks like below (All Nov-13 rows will return)
Im looking for a way to select between multiple choices linked to one criteria. Eg criteria beeing Chain x Article 1, which should give me the option to show and select from multiple unique values linked to that criteria (in attached example values 1 or 30 in column AQ marked in yellow). If possible solution should be formulas/functions.
View 2 Replies View RelatedHow can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI am trying to limit the format of data to all cells in a column to 2 letters followed by 6 digits. The letters and the numbers are not required to be the same, but the person entering can only enter in that format.
View 2 Replies View RelatedI have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I am downloading my data in the eze tab. Column b is in a text format. How can I amend my formula on the trading statistcs tab for my sumproduct formula to work?
View 7 Replies View RelatedI have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
I have VBA code the extracts data from a source and puts it into excel. I need to change the format of some of the extracted data so i can use it for a VLookup formula. Reference the attached example. Columns A AND B have the extraced data which are dates. In Columns C and D or E and F I have typed what I would like the data to look like so I can use in a Vloolup formula. Is there VBA or a formula that word change the format of the dates in Columns A and B to look like C and D or E and F. The changed format could be moved to any new cells or rows.
View 1 Replies View RelatedI have a spreadsheet with columns A to X.
There are about five variables which, when entered, should format the row their on. For example, if I select "Waiting List" from a dropdown in column A, the row is formatted to have a blue fill.
I'm currently using this code:
VB:
Sub waiting()
Dim sh As Worksheet
Set sh = Sheets("Applications")
sh.Range("A1:X1").AutoFilter Field:=2, Criteria1:="Waiting List"
sh.Range("A2:X2" & sh.Cells(sh.Rows.Count, 1).End(xlUp).Row).Interior.ColorIndex = 37
sh.ShowAllData
End Sub
I have five such macros.
The problem I am having is that when there is no entry for the macro to work on, it just formats rows 2-21 anyway, and overwrites any other formatting.
I have attached my workbook so you can take a look and see what I mean. Firstly, select "Waiting List" in cell B2, then run the macro "waiting". It should work fine.
Then, delete the content of B2, and run the macro again.
I have a sheet with data imported of another software. In the column "G" are all the dates, and the problem is how can i change the format, because, some of them are "mm/dd/yyyy" and the rest are "mm/dd/yyyy".
Is there a way to change it to the same format? maybe there are some dates like "11/02/2007" that are "02/11/2007" (i don't know how change it with code), and others that the difference between formats is logically clear. I want to get the format "dd/mm/yyyy".
After this i want to apply a filter between two dates, for example, (in dd/mm/yyyy) from01/05/2007 to 30/08/2007.
I've tried different ways, but i'm not able to transform the format of the dates to the same format, although i've read your help and other posts that talk about this.
I have a time format in one excel sheet, I need a macro or a formula to change it into a specific format, this is to be able to import it to another software.
I have attached a file here you can see an example, this I manually, I want Row D and E into the format in A, I s it possible to make it in a macro or formula, manually it takes a long time.
File Type: csv TimeFormat.csv‎
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
I have a formula in cell A1 that I need to drag downwards so that it fills cells A2 to A10. That formula is picking up the figures located in another sheet but the figures on that sheet are arranged horizontally (A1 to J1). Is there a formula to perform this action? I've tried playing around with the $ sign in my formulas but it does not work.
View 2 Replies View Relatedif there's a way I can verify that a custom add-in is active? My company uses an add-in to allow end users to construct several types of API calls. My program depends on that add-in to be installed. I'd like to try to detect the add-in and halt the program if it's not there.
View 3 Replies View RelatedI worked out the code below. I supposed to check the date entered in the text box, if that date is greater than the date in cell A2, is supposed to pop up a message box, but is only half working.
For example if I enter 3/1/2013, the code works, but if I enter 1/1/2014 it will not work, it thinks the date is OK and goes on to to the Else statement. In other words, is only looking at the first part (month and day) of my date and ignoring the fact that the year is in the future.
VB:
Dim frmDate As String
Dim toDate As String
Set ws = Sheets("Dashboard")
frmDate = frmEnterDate.txtReportEffectiveDate.Value
toDate = frmEnterDate.txtReportEffectiveLastDay.Value
[Code].....
I found some username and password login code that I am editing for my needs, but I am having some trouble with it. I keep getting run time error '448': Named argument not found on the following line:
MatchCase:=False, SearchFormat:=False)
[Code] .....
I have also attached my workbook.
Equipment Return Log.xlsm‎
I have a code to verify the user name and password, what I want is counting the times the user enters wrong password and show a msgbox when he enters three continuous wrong passwords:
I have created the following lines which are part of a long code, the code is actually running without errors, but it is not showing the msgbox,
Anyway, I am basically done with a program which looks for one condition and displays an email to send as a reminder.
What I need is to have an if/then statement which checks a column in the spreadsheet and if the cell in the column states "closed" then an email is NOT displayed/sent. It seems whenever I run the macro, an email appears even if the cell for that row reads "closed."
My if/then statement in question lies following my note " 'here lies my current dilemma to solve"
Code:
Sub ThreeDayEmailTest()
'
' ThreeDayEmailTest Macro
[Code]....
I want to do is have a formula that will return a result if the cell contains a full stop "." and the at symbol "@". Something like a countif contains, but I'm struggling to find a solution where it contains both symbols.
I'd like the formula to return a 1 it finds both symbols, and a zero if it doesn't find both symbols.
I have an Excel VBA routine which opens another Excel file as a part of the routing. For example:
' Beginning of the code.
Workbooks.OpenText Filename:= Range("log_file").Value, Origin:=xlWindows
' Rest of the code.
The problem I run into is when the user does not have access (via Windows Active Directory) to the file located in the "log_file" range. They usually will get the old runtime error 1004. I can easily trap that error but err 1004 is used so many other times, I don't want to mistakenly trap it as something else. Does anyone know of a way to verify and/or check if the user has read/write access to a file (or folder) before opening it?
I need to PAUSE my VBA code (about halfway through) in order to verify some calculations before I can allow the macro to finish running. If the numbers are correct, then I'd like the macro to finish running accordingly. However, if the numbers are incorrect, I need to be able to search my Excel file for the error (the error would be due to a format issue with the data that I pulled in), fix the error, and then let the macro finish running from the point it was paused.
Right now, I've got a Message Box that pops up asking me if the numbers are right and I have to answer YES or NO. I always answer NO so that the macro crashes -- this allows me to check the excel file without having to stop the macro. Once I've fixed the data problem, then I go back into my code and let it run to its conclusion.
I am trying to create a log-in page on a userform, frmlogin in "sheet3." The userform is simply a textbox, Username (txtuser) and a textbox, Password (txtpass). Command Button is cmdcheck
I want the User to enter their username and password and for my macro to verify that they match referencing data in a seperate worksheet, (Sheet6).
Upon verification I want the user to be unloaded on "sheet1"
I am currently getting this message: "unable to get vlookup property of the worksheetfunction class"
VB:
Private Sub cmdcheck_Click()
Dim Username As String
Username = txtuser.Text
[Code]....