I have a table A3:C118 and I am filtering the data and finding the subtotal for the maximum value in column C. How do I find the corresponding data point for column A? I have tried several formulas and they are not giving me exactly what I need.
View 3 RepliesHow do i use the Index Function for Filtered Cells. The code below will ignore the hidden or filtered cells. =INDEX($A$3:$A$100,B1)
View 6 Replies View RelatedI have several spreadsheets referencing the "Data" sheet's table (about 35 columns, and the row lengths will differ from 10 to several hundred).
I need to be able to filter the table in "Data", and have the hidden rows not show up everywhere else in the document. I have both vlookups and index formulas in the other spreadsheets, and what I'd like to do is be able to filter by any column in the table and have only the shown results show in the other sheets.
I know this might be accomplished using subtotal, and Row, etc., but how to set it up with the different formulas I have going on in the sheet that pull data from the table. I need this to work with both the vlookups and index cells.
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00
columns E, F respectively have cust #B100 & 40.00
columns G,H respectively have cust #C100 & 60.00
Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
I have a project that has several worksheets of "summarized" data all pulled from one worksheet. The data worksheet is run through an external program and pasted into the workbook to update the information.
To this point I have used tons of index match array formula's to pull the information but I've found this to be extremely inefficient because there are hundreds if not thousands of formulas, and it takes several minutes to update. The file is also around 3MB which is way too big.
I was thinking about using VBA to simplify the worksheets, but then I came across an article about D_Functions and I'm thinking they may be the solution to my problems.
However there is one catch...I'm not sure how I would build these formulas to work in my worksheets. I understand the principle behind the D_Functions, but I can't seem to grasp the concept of integration and making it work in my scenario.
I've attached an example of this workbook, it has most of the forumla's deleted out to reduce the file size, but it should give you an idea of what I'm doing. Once you open it you'll have to unhide some columns to get to the nitty gritty of the sheet.
Feel free to take a gander...I'm open to any suggestions you may have at this point (except to trash the whole project hehehehe ). If you find a solution please explain the concept behind it. I really want to learn how to make this work rather than plugging in someone elses formulas.
I have the first sheet named "DPF" where I have a column "Date", "FIT", "Group" On my second Sheet named "Tracker" what I do want to do:
I select a date for example 18-07-2014 (Cell E3), if cell E4 I Have "Fit" and F4 "Group" In C6 I have E3-15, to get the date minus 15 days (03-07-2014) In C7 I have E3-12 (06-07-2014) and so on
What I want is, if the date of today is C6 or C7 or whatever, use the index match function to get the number corresponding to the date chosen (18-07-2014) for the FIT. But, once I get the figure, I want to keep it, because with the if function, once we are the 4th of July, the figure for C6 disappears...
Fri
18-Jul
FITGroup
Start
D-1503-Jul
D-1206-Jul
D-909-Jul
D-612-Jul
D-615-Jul
D-216-Jul
D-117-Jul
D18-Jul
So either a macro to copy the specific data into another sheet or a another way to keep it. Because the idea as the end is to do different scenario based on the result got per period..
How to deal with duplicate data in excel using index and match function. Is it possible to use the following function without having a unique value?
View 1 Replies View RelatedI have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View Relatedlet me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
In an excel sheet A1 to ...... colum i have some cirteria. If I filter a criteria i should get the count for it. Kinldy let me know with out using VB how is it possible.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedIs it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies View RelatedHow do I add a space between these 2 =Index functions
=INDEX(Customer!G$1:G$5,MATCH($C$35,Customer!$A$1:$A$5,0))&INDEX(Customer!H$1:H$5,MATCH($C$35,Customer!$A$1:$A$5,0))
As its displaying an address like this currently
22Newtonroad and I want 22 Newton Road
My formula is: = INDEX (Lastsales,$022,$S$5)
O22 is blank
S5 =1
I am not getting an error message. I am getting data that is in Lastsales in column 1, row 19. What is Excel using for the row since $O22 was a blank?
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
View 5 Replies View RelatedI've been working on a payroll program for my small biz. I'm close to done BUT...When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
I am trying to sum values on sheet1 in column CR using the index function, but it comes up as #ref!
see formula below
=INDEX(Sheet1!1593:1609,96)
I have attached a sheet with what I am trying to accomplish...
I have several records that I am doing a lookup through. Most records have the same "work order number". As you can see on the attached sheet, my lookup function returns all the work order numbers that match my criteria.
What I need is to only return the first instance of the work order number then return the next unique work order number that meets my criteria.
Attachment 297239!
I would like to have an Index & match function in my userform.
I know that i must use it like this Application.WorksheetFunction but i am not able to do it.
User select a code and then in next text boxes, description and price should appear.
I am working on a spreadsheet which contains a number of reference data sheets (named “Reference data 2009”, “Reference data 2010” etc). As their names suggest, these sheets contain reference data applicable to the particular year. This reference data is used to perform various calculations in a “Calculations” sheet.
On the “Calculations” sheet, the user specifies the year for which they wish to perform calculations. At present, I am using the volatile INDIRECT function to perform various HLOOKUP calculations along the following lines:
=IF(D15>=HLOOKUP('Detailed net pay calculations'!D16, INDIRECT("'Reference data" & 'Detailed method'!$C$2 & 'Detailed net pay calculations'!D1 & "'!$B$43:$Y$52"), 4, FALSE), “Do something”, “Do something else”)
The reason I'm using the INDIRECT function is to identify the sheet with the appropriate year (hence "Reference data"&'Detailed method'!$C$2&'Detailed net pay calculations'!D1 which could be interpreted by Excel as "'Reference data 2009NEW" or "'Reference data 2010", depending on whether there's text in cell D1).
My query
The function I'm using is working perfectly fine but I am wondering if it is possible to replace the INDIRECT function (in red) with INDEX or another non-volatile function in order to reduce the performance impact (I have a fairly large number of these types of functions).
I'm looking for the reason why the following use of the INDEX function returns a cell address [ie the formula evaluates SUM($C$2:C3)]-
View 5 Replies View RelatedPlease see the attached worksheet for details. I would like the array function to search for instances of the word "FALSE" in column E and return the values of columns A:D when a match is found. I have done this successfully when the lookup value is a value in the first column of the range, but cannot seem to do so when the lookup value is in the last column of the range. I have received a #NUM! error each time.
View 9 Replies View RelatedIs there a way to use the INDEX function to return Blanks or NAs instead of zeros when the corresponding row & column match is a blank/null cell?
e.g. =INDEX(F10:H13,1,1) returns 0 even if cell F10 is blank?
I have different worksheets to contains information from different years. To make it comphrensve, I have created a mastersheet which contains all the info across the worksheets. And once I make an entry in the worksheet, I hope the mastersheet can be updated automatically. the function I set is
INDEX('2011-12'!K$4:K$7,MATCH(Master!$B5,'2011-12'!$B$4:$B$7,0),1).
Yet, my problem is..... once I perform sorting in the mastersheet, the cells are wrongly matched. So, I just wonder how I can revise the function?
I compile ratings for racehorses and am currently extracting the data I need using an array formula. Unfortunately there are are many thousands of lines of data and it can take quite some time for the data to pull through.
Here is a sample of the formula's I am currently using. I cannot take credit for the formulas by the way I found them on the web.
IF(ISERROR(INDEX('Database 2012'!$A$1:$B$300,SMALL(IF('Database 2012'!$A$1:$A$300=Ratings!$A3,ROW('Database 2012'!$A$1:$A$300)),1),2)),"",INDEX('Database 2012'!$A$1:$B$300,SMALL(IF('Database 2012'!$A$1:$A$300=Ratings!$A3,ROW('Database 2012'!$A$1:$A$300)),1),2))
Basically I have 2 sheets (Database 2012, Database 2011) with the horse names with ratings next to them for each run, One sheet for this season one for last season.
These are sorted in date order. then I have a ratings sheet that shows the horse name and then to the right it has columns for each of its last 4 ratings.
The formulas I use look for the horse name on the database sheet then put the rating in latest rating in the first column then the 2nd latest in the next column and so on until the last 4 ratings are shown. If there are not 4 ratings to find the is an iserror at the beginning of the formula to populate that cell with a blank so that the errors dont show.
What I want to know is there a way of doing what the formula does using VBA and more importantly would it be quicker than using array formulas which are very slow to recalculate when there are 1000's of lines.
I am trying to use index & match function to extract data from data base with has multiple critera in rows as well as cloumns but it is not giving correct results.
Example:
A
B
C
D
E
[Code].....
In C9 I typed =INDEX($B$2:$E$6,MATCH($A9,$B$1:$E$1,0),MATCH($B9,$A$2:$A$6,0))
The result I got was #Ref!
what formula should I use in C9 to get 20, C10 to get 5 & so on
FB1 to FB4 are column headers (critera)
GL 1 to GL5 are row headers (critera)
So here is how I have a template laid out:
A
B
C
D
E
F
ROW 1
Period 10
Period 11
[Code] ........
Cell E4: =SUMIF('P10-2011'!$A$4:$A$272,'Budget Upload'!$A19,'P10-2011'!$H$4:$H$272)
I have a SumIF statement in cell E4 but I would much prefer some sort of index or something where I can drag the formula down because the cells in column D will change (and require me to pick a different SUM range for my SUMIF function). Now my issue is I have multiple matches so when I use a typical index it returns the FIRST match.
Here is the formula I used in cell E11 to try and replicate the result in E5:
=INDEX('P10-2011'!$A$2:$Y$272,MATCH('Budget Upload'!$A4,'P10-2011'!$A$2:$A$272,0),MATCH('Budget Upload'!$D4,'P10-2011'!$A$2:$Y$2,0))
My index function works as it is designed but only returns the FIRST match. I should have multiple matches.
Is there a way to use an index function to return multiple results?
To clarify,the index function I put in cell F4 returns only ONE column (which is correct and will always be correct), which is related to the cell D4 but I have multiple rows (related to "7002" row match portion of the index function).
I've been working on a payroll program for my small biz. I'm close to done BUT...
When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
Code:
=INDEX(SingleWH!C$6:M$140,MATCH(G7,SingleWH!A$6:A$140,1),MATCH(E$1,SingleWH!C$4:M$4,0))
This is the code in Column F. You can see where it uses the result in Column G to look for a value in sheets("SingleWH").
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
I have two worksheets, named as follows:
Worksheet1: SUMMARY
Worksheet2: ART 2013
'ART 2013' contains a list of staff numbers in column C16:C752 and a list of dates in column M16:M752 (formatted as "mm-yyyy")
Within 'SUMMARY' cell G12 contains the date 04-2013.
What I would like to do is achieve a function that will look at 'ART 2013' columns C and M in and where the date in Column M is equal to cell G12 (04-2013) of the 'SUMMARY' worksheet excel will return the Staff Number in 'ART 2013' column C.