I have pasted 5 fields with some random values that are in A1 to E1. E is the column I am trying to populate to fill in the missing data for C.
I have written a function that will interpolate between 2 deltas using the dates. Assuming that June 09 will always have a corresponding delta (e.g. here 33) how can i populate the INTERP column using my YINT function. I can do this manually 1 at a time, but the already-filled cells in the Delta column will not always be the same and manually would take ages....
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I need to write a VBA code to remove the value of the cells in column B if the value in column A is empty. In my excel sheet, the user will paste hyperlinks in column B. If any link does not meet certain conditions, the cell in the same row in column A will be empty.
I want to have a change event so that after pasting links, it automatically deletes the links from the cells in column B if the cell in column A is empty
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
Ok, so I have a column of data in 24hr time format over a 24hr period from noon thru midnight and back to noon again. It has been necessary to make some of the cells in the column blank, and I am having difficulty extracting the first and last non-blank entries of the column (basically I want the earliest and latest time in that specific 24hr period). The time data is in order, so for example, some of the first values in the column are 14:30, 21:10, and 22:40, while some of the last values in the column are 02:20, 05:50, and 11:00, therefore the values I require are 14:30 and 11:00.
Any help that anyone can give on this matter would be greatly appreciated, but until then I guess I will keep plodding through the help sites and playing with formula until I spontaneously combust.
i want to find all the empty cells in column M & N within the data range and input formula into them. How can i make it to input the formula only within the data range (maybe can take reference to data in column E, only when there is data in column E then empty cells in M & N will input with formula)
I am using the code below in an effort to copy two columns from Worksheet1 ("S:S","T:T") to Worksheet3 ("A:A","B:B"), delete the empty cells and then find the difference between the two values for each row("C:C"). I do not want to create a new column in Worksheet1. The code worked great before adding the SpecialCells code but was slow since it had to also process the blank cells. I am trying to speed it up. The code has an error on line five and I cannot seem to figure out why.
Sub TempDiffok() Dim wsNew As Worksheet Set wsNew = Worksheets.Add(After:=Sheets(Sheets.Count)) Sheets("Sheet1").Range("S:S").Copy Destination:=wsNew.Range("A:A") Sheets("Sheet3").Range("A:A").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp Sheets("Sheet1").Range("T:T").Copy Destination:=Sheets("Sheet3").Range("B:B") Sheets("Sheet3").Range("B:B").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp Sheets("Sheet3").Range("C2").Select Application.CutCopyMode = False ActiveCell.FormulaR1C1 = "=RC[-2]-RC[-1]" Selection.Copy Columns("C:C").Select.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _ True, Transpose:=False End Sub
The last two lines are from the previous version before adding the ability to delete rows prior to the calculation.
In the Wheelchair 1, 2, 3 & 4 sheets in the attached workbook, I would like to do a simple calculation of the contents of column 'H'. Instead of it adding up to just a few £'s I'm getting the result of something like -£5880.00. I think I know whay is wrong, but I don't know the solution to it. Column 'H' populates when a date is put into Column 'E' So if cells if cells in Column 'E' are empty then column 'H' doesn't do the sum.
What I think I need is a bit of formula to put into column 'H' to tell it to ignore blank spaces and count what is there.
Is there an easy way that if any cell in column A is blank it can copy the value from the closest non-blank cell above it? I eventually have to export data from a workbook into a database. But I cannot have any cells in column A as null or blank.
1. There are no blank rows, and at least 1 cell in each row has a value. 2. The person who constructed the sheet did not fill in all cells in column A for each row, they imply that if the cell is blank then it belongs to the same value as whatever the cell above it has. Ie, all similar rows are grouped together. 3. Of course, I only need column A filled in for rows that have data in at least 1 of their columns. 4. Simple worksheets with no formulas to worry about.
Additionally, if it is possible to get a macro so I can apply the code to all worksheets in my workbook at once, can I get that too? In the example below (where .... are blanks) I would like A2 to read 'Fruit' and A4 to read 'Meat'
ColA ColB Colc ---- ----- ------- Fruit apple red .... grape green Meat ham pink .... beef brown
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I'm attempting to count the empty cells in column C which correspond with the project reference shown in column A. I only want to perform this calculation where the project numbers change (see desired results in column D).
Am struggling with finding a way to define the different range of rows for each project ref within the formula. The full sheet has over 6000 rows and 1500 project refs.
Let's say I have 2 files: Source file and working file. In source file there are some text names in a column that are updated once in a while.
1. I need to create a column in "working file" such that is taking values from column in "source file" even when "source file" is closed.
2. It should take only non empty values, because I need to create a cell with validation list that consists of text names from the column.
Solving attempt: By searching some solutions in forum I found that the first part I can do in the following way: copy column from "source file", select in "working file" a "paste special" option and choose "paste link". It works, but the problem is that it imports all the column: if in "source file" the column consists of words "a" (cell A1), "b" (cell A2) and all other cells in A column are empty - in "working file", after linking, it appears as "a" (cell A1), "b" (cell A2) and all other cells in A column are "0" (zeros) till cell A65536. And I need that in "working file" column after linking will appear as "a" (cell A1), "b" (cell A2) and all other cells will be empty, so by setting one of cells in B column to be a list (by "Data" - "Data validation" - "List" ) - it will consist only from "a" and "b", and not from "a", "b", "0", "0", "0", .... (65534 zeros).
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB: VB: Private Sub CommandButton3_Click() Dim wks As Worksheet Dim rng As Range
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else Row 2 is my header, so cell A2 says "ID" Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
I just have a quick question with regards to two-way interpolation of data.
I have a data table which has x-values, y-values and z-values.
I need to obtain an interpolate value for z, given a value for x and a value for y.
The x value specified is 1.569 and the y value specified is 1.66.
I know how to use the FORECAST formula for a simple x, y table, but I have no idea what to do here when I need to find a z value, given the x and y values.
I have data essentially comprising a set of points with x and y coordinates. Is there a way to index and interpolate between points?
I can use INDEX or LOOKUP to look up a y value fo a valid x value but don't know a way to interpolate if the value is between x values. Is this possible?
I got a table of two columns (A1:B6). One column (A1:A6) got temperature values and the other column (B1:B6) got enthalpy values as a function of temperature values as shown in the attached file. All values in the table are empirical values and I am trying to use them to obtain the enthaly (B11:B21) for my own temperatures (A11:A21).
I can use VLookup formula to do so but it won't be accurate because the enthalpy values are very sensitive to temperature changes. I need to use table A1:B6 and interpolate for temperature values that are located in between the integer temperature valuse. e.g. if the temperature=1.5 (between 1 and 2 in the table), how can I obtain the enthalpy value=15 (between 10 and 20) using the table.
i have a spreadsheet with a column of numbers in increments of 5 ie 25, 30, 35, 40, 45, 50, etc. and an adjacent column of decending numbers ie 275,273,262,250,238 where the numbers in column b decrease by varying amounts each time. for a given value say 37 i want to interpolate between the corisponding values of 35 and 40 to give an answer.
i'm trying to write a sheet that records weight from a date and user input trouble is people are likely to miss days out and i want to fill in the missing dates weight based on actual inputs from other days. if i make it easier and say it like this column A is the weight, column b is the number of days gone as an example i've made it straight forward but left 4 values out
